Subject: [IBIS-Users] s2ibis2.solaris
From: garry.felker@conexant.com
Date: Thu Dec 19 2002 - 17:19:55 PST
Question 1 (VT curves)
Can anyone tell me how to configure the .s2i file to automatically add pwl
stimulus for rising and falling waveforms?
The example shows:
[Rising waveform] 500 0 NA NA NA NA NA NA NA
[Falling waveform] 500 3.3 NA NA NA NA NA NA NA
My results have Rising Waveform voltages of all 0.000V and Falling Waveform
voltages of all 3.30V.
Question 2 (VI curves)
Again in the .s2i file under [model file] the example shows:
[Model file] spectre.mod spectre.mod spectre.mod
This file contains Nominal, Slow and Fast parameters. But my .ibs data
only shows I(typ). It shows NA for I(min) and I(max).
How do I get it to show the I min and max data?
Thanks for any help
Garry Felker
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Thu Dec 19 2002 - 17:28:14 PST