Subject: Re: [IBIS-Users] 5V tollerant pad
From: Duane Mattheisen (duane.mattheisen@onsemi.com)
Date: Tue Jan 28 2003 - 10:02:00 PST
Garry
You might look at a TI IBIS model they do multiple Vcc ranges in one
file. One would be a VCX16244 device.
Duane Mattheisen
garry.felker@conexant.com wrote:
>
> Hi all,
> I have a 3.3V I/O pad that is 5V tollerant. I would like to include Rising
> and Falling waveform data with voltage rails at 3.6 and 5.5 V.
> Is there a way to include both of these conditions in the IBIS model?
> Garry Felker
>
> |------------------------------------------------------------------
> |For help or to subscribe/unsubscribe, email majordomo@eda.org
> |with just the appropriate command message(s) in the body:
> |
> | help
> | subscribe ibis <optional e-mail address, if different>
> | subscribe ibis-users <optional e-mail address, if different>
> | unsubscribe ibis <optional e-mail address, if different>
> | unsubscribe ibis-users <optional e-mail address, if different>
> |
> |or email a written request to ibis-request@eda.org.
> |
> |IBIS reflector archives exist under:
> |
> | http://www.eda.org/pub/ibis/email_archive/ Recent
> | http://www.eda.org/pub/ibis/users_archive/ Recent
> | http://www.eda.org/pub/ibis/email/ E-mail since 1993
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Tue Jan 28 2003 - 10:31:10 PST