Subject: [IBIS-Users] CAN 3.3v IBIS models can be used for 5v device
From: Sudheer B S (sudheer@ecadtech.com)
Date: Mon Feb 03 2003 - 13:02:13 PST
Hi All
I have IBIS model for a device operating at 3.3v , The model of
the same device for 5V is not
availible .My quection is , Since the technology remains same by
extending the Pull up .pulldn
pwrclamp and Gnd clamp Curves AND by Changing the Voltage range
(also threshold) Can we make IBIS models ??
Does the change in device voltage will have Large Variation in C_comp
??
Instead of Going for Equivalent 5v device , this should be the better
choice .
please Correct me If I my approach is Wrong
Thank you
SUDHEER
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Mon Feb 03 2003 - 19:54:36 PST