Subject: RE: [IBIS-Users] Question about warning message
From: Angulo, John (john_angulo@mentorg.com)
Date: Fri Feb 07 2003 - 10:58:25 PST
The following is posted on behalf of Laxmi Vishwanathan of Lattice Semiconductor. Please send any private replies to laxmi.vishwanathan@latticesemi.com only.
-----------------------------
Hi,
I am trying to Get Lab Data for a GTL+ Buffer, would I need to terminate
the buffer ? If so, is there an IBIS spec for the termination vaule for GTL+
? How can I measure data for this kind of terminated buffer.
Thanks for the help.
Laxmi.
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Fri Feb 07 2003 - 11:09:30 PST