Subject: [IBIS-Users] RE: [IBIS] Re: Ibis generation problem
From: Todd Westerhoff (twesterh@cisco.com)
Date: Tue Apr 15 2003 - 06:47:17 PDT
I think I remember this one.
I think it's a memory corruption (bad pointer) problem (as Mike said). Take
a close look at your .s2i file - if memory serves, you'll find out that the
model name you called out in the [Pin] section doesn't exactly match the
model name you have in the [Model] section. That drives s2ibis2 nuts.
Another thing that has perplexed me in the past has been when I used pin
names longer than 5 characters. S2ibis2 wants to be able to append 3
characters to the pin name, add a ".spi" extension, and still end up with a
legal 8.3 character file name. Use a 6 or more character pin name, and you
get another set of weird problems that are hard to diagnose.
Hope that helps,
Todd.
Todd Westerhoff
High Speed Design Specialist
Cisco Systems
1414 Massachusetts Ave - Boxboro, MA - 01719
email:twesterh@cisco.com
ph: 978-936-2149
============================================
"When did the choices get so hard, with so much more at stake?
Life gets mighty precious when there's less of it to waste"
- Bonnie Raitt, "Nick of Time"
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Tue Apr 15 2003 - 08:02:48 PDT