Subject: [IBIS-Users] Question On Input buffers
From: Kannan Srinivasagam (pks@cypress.com)
Date: Wed May 14 2003 - 14:09:49 PDT
Hi,
Could someone clarify why my input buffer gnd clamp IV table
starts from -1.50ua at -1.5V goes to 0 at 0V and goes back to 1.5ua at
1.5V. Is this correct. I believe it should start from a specific value
and go down to 0V. Just want to know what might be wrong : is it my
spice netlist( working fine with spice sims) or my .s2i file.
Thanks
Kannan
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Wed May 14 2003 - 14:34:39 PDT