Re: [IBIS-Users] Error while using s2ibis2

Subject: Re: [IBIS-Users] Error while using s2ibis2
From: erik.van.der.ven@philips.com
Date: Sun May 25 2003 - 23:35:02 PDT

Next message: Haque, Moshiul: "[IBIS-Users] FET Switch Model with internal pulldown resistor"
Previous message: Frank Dunlap: "RE: [IBIS-Users] Error while using s2ibis2"
Maybe in reply to: Kannan Srinivasagam: "[IBIS-Users] Error while using s2ibis2"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Dear Kannan,

Are you using a stand alone PC or are you working on a terminal network,
with remote servers?
I had problems before with s2ibis: it could not read the files that were
created with the spectre simulator (these simulations are done by s2ibis).
This was caused by the fact that s2ibis and spectre were running on
different servers. The workaround was to open a new window and explicitely
select a compute server for that window and then start working. I am not
sure if your problem relates to this, but perhaps it helps.

With kind regards,

Ir. Erik van der Ven
Room DB1032
Business Line Networking Infrastructure
Philips Semiconductors BV
Gerstweg 2
6534 AE Nijmegen
The Netherlands
Phone: +31-24-3534334

Kannan Srinivasagam <pks@cypress.com>
Sent by:
owner-ibis-users@server.eda.org
05/23/03 08:14 PM

        To: "ibis-users@eda.org" <ibis-users@server.eda.org>
        cc: aju@cypress.com
(bcc: Erik van der Ven/NYM/SC/PHILIPS)
        Subject: [IBIS-Users] Error while using s2ibis2
        Classification:

Hi,
Could anyone tell me why I am getting the following error during my
s2ibis2 Input model run :
ERROR : Difficulty in Reading input

I am not sure what I am doing wrong.

Thanks
Kannan Srinivasagam
Cypress Semiconductor

application/octet-stream attachment: pks.vcf

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993

Next message: Haque, Moshiul: "[IBIS-Users] FET Switch Model with internal pulldown resistor"
Previous message: Frank Dunlap: "RE: [IBIS-Users] Error while using s2ibis2"
Maybe in reply to: Kannan Srinivasagam: "[IBIS-Users] Error while using s2ibis2"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b28 : Mon May 26 2003 - 00:12:21 PDT