Subject: Re: [IBIS-Users] IBIS model Error
From: Pascal GILGENKRANTZ (pascal.gilgenkrantz@st.com)
Date: Wed Aug 13 2003 - 23:36:05 PDT
Hello Allen,
I ran into the same a few weeks ago. I found the answer in
the free "Visual IBIS Editor" (From Innoveda) in the help menu
which is very well explained.
-> Help Menu
-> Verifying IBIS Models
-> V/t and V/I Table Data are Mismatched
Available from Mentor Web site : http://www.mentor.com/hyperlynx/visibis.cfm
Pascal Gilgenkrantz
STMicroelectronics
> achao@synopsys.com wrote:
>
> Hi IBIS experts,
> I have the same problem as Muthu Lakshmi. I don't really understand how the
> parser calculated the DC end points from the IV table... If anyone can
> kindly show me how it works or know where to find the information on the
> internet, it will be greatly appreciated.
>
> Thanks in advance,
>
> Allen Chao
>
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Wed Aug 13 2003 - 23:38:06 PDT