(no subject)


Subject: (no subject)
From: Allen Chao (achao@synopsys.com)
Date: Mon Aug 25 2003 - 13:21:49 PDT


Hi IBIS experts,
I have a 5V-short protection in my device and that causes my pull-up,
pull-down, and power clamp curves not acting monotonic.
I've attached the curves below.

Any suggestion for this kind of circuit? or it's ok to leave it like this?

Thanks in advance,
Allen Chao





|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993



This archive was generated by hypermail 2b28 : Mon Aug 25 2003 - 13:27:12 PDT