Subject: [IBIS-Users] How to perform Laboratory measurement for getting VI and VT data
From: anil kumar (masanil@yahoo.co.in)
Date: Thu Sep 11 2003 - 01:15:25 PDT
Hi sudheer & experts,
My question is how to get V-I and V-t curves by
Direct measurement method. Please suggets me any
material which contains detailed explanation(with some
circuit diagrams preferrably)of Lab set up.What is the
use of curve tracer for getting data? I don't have
cuve tracer. Please tell me what can I use in place of
cuve tracer.
sudheer, I followed your suggested material. It is
helpful for me in knowing the modes of operations for
getting the typ min max values. But what my doubt is,
can I use HSPICE simulation set up for Laboratory
measurements also? If no, then Please suggest any
other material which will be helpful to perform Direct
measurement.
with regards,
anil.
________________________________________________________________________
Yahoo! India Matrimony: Find your partner online.
Go to http://yahoo.shaadi.com
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Thu Sep 11 2003 - 01:20:19 PDT