Subject: [IBIS-Users] Power clamp.
From: Lior Dagan (liord@saifun.com)
Date: Sun Sep 21 2003 - 02:51:41 PDT
Hello, I have a question:
I wish to conduct power clamp simulation, and for making it simple, I'll do
a very small simulation:
VCC=2.7V
I have five sweep points:
0V, 1.35V, 2.7V, 4.05V 5.4V.
The results (current measures) are: 0 0 0 1.5e-06 5E-3
My question is:
Is the stimulus valid?
should the reults be in their values, or relative to vdd?
i.e. What should the section from the IBIS file look like?
0 0
1.350E+0 0
2.70E+0 0
4.050E+0 1.50E-6
5.40E0+0 5E-03
or:
-2.70E+0 0
-1.350E+0 0
2.70E+0 0
4.050E+0 1.50E-6
5.40E+0 5E-03
Thanks
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Sun Sep 21 2003 - 01:55:14 PDT