[IBIS-Users] package issue?

Subject: [IBIS-Users] package issue?
From: Eric Hsu (ehsu@netlogicmicro.com)
Date: Tue Nov 11 2003 - 14:56:42 PST

Hi IBIS experts,

There are three questions about package model for ibis:
Q1. If there are 128 pins in my chip, can I define partial pins R/L/C by R_pin/L_pin/C_pin, and partial from package file (*.pkg)? For example, from pin 1 to pin 50 and from pin 100 to pin 128 are specified in the ibis model by R/L/C_pin, and from pin 50 to pin 75 by global R/L/C, and pin 76 to pin 99 by the package file?
Q2. If the above way is working, should I specify [pin numbers] as 24 in the package file?
Q3. By the 3.2.9 ibischk3, can I qualify this ibis model and package file?

Best Regards,

Eric Hsu
Interface Technologies
NetLogic Microsystems, Inc.
450 National Ave.
Mountain View, CA 94043
650-961-6676 x198
This e-mail contains NetLogic Microsystems, Inc. Confidential information

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993

This archive was generated by hypermail 2b28 : Tue Nov 11 2003 - 14:59:48 PST