RE: [IBIS-Users] Difference in rise-fall waveform due to c_comp!!

Alok,

One possible way for doing it can be found in my presentation:

http://www.eda.org/pub/ibis/summits/jun03a/muranyi1.pdf

Look at pg. 8, the yellow highlight indicates C_comp compensation.

Arpad
==================================================================

-----Original Message-----
From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org]On
Behalf Of Alok Rungta
Sent: Wednesday, March 17, 2004 7:46 PM
To: ibis-users@eda.org
Subject: Re: [IBIS-Users]Difference in rise-fall waveform due to
c_comp!!

  Arpad,
I indeed had connected resistence to Gnd and when I resimulated with
resistance connected to Vcc it is the rise waveform that is different
which is consistent with your explanation.

        What is not clear to me is when simulator is trying to find response
for a new load(which may be diff. from ref. load) how is the "new waveform"
,that you mentioned, created (i.e. the circuit used to calculate it) and
how is it used
when calculating for the required load.

 I have seen docs where ccomp is shown connected to Gnd. and if
load is also connected to Gnd what kind of circuit are we looking at while
creating the new waveform and using it further to find the waveform at the
different loads.

Thanks & Rgds
Alok

-- 
          \|||/
          (o o)
 ------ooO-(_)-Ooo-------
  Alok Rungta            
  DSP Design              
  Texas Instruments
  Bangalore                
  Email : alokr@ti.com 
  phone : +91-80-5048019  
 ------------------------  
                                            
                                             
                                             
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993