[IBIS-Users] I/O with multiple modes for IBIS model

Hi All,

I am looking at a tristate I/O with multiple modes -- which enables
different output drive strengths by pullingup/pulldown varied number of
transistor fingers. That means I am going to get different
Pullup/Pulldown/PowerClamp/GndClamp/ current of different modes.

When it comed to IBIS model, for this single pin, how can I include 2
modes data into one iBIS model? Or do I have to create 2 seperate one?

Thanks for your help!

Guoli

>
>

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
Received on Mon May 17 15:26:39 2004