RE: [IBIS-Users] Multiple power and ground ports

Vivek,

What you're talking about is not part of the IBIS specification. Is this something particular to your simulation application? What simulator and model are you refering to?

Regards,
Weston
 

-----Original Message-----
From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf Of Vivek Kumar Sundriyal
Sent: Friday, October 08, 2004 4:25 AM
To: ibis-users@eda.org
Subject: [IBIS-Users] Multiple power and ground ports

Hi ,

 I have multiple power and ground ports in the I/0 .

 Now, i understand that in the [Pin] section of the command file, the first node that has the model name as POWER, will be set at the power port and the voltages will be set onto this node. And i get the V/I , V/T w.r.t this node.

  But what in my case ? How do i handle multiple power and ground ports in the command file

Thx,
Vivek

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
Received on Fri Oct 8 09:22:29 2004