Re: [IBIS-Users] ibischk4

Hi Katja:

ibischk4 does not test the [Ramp] data (in particular the
dV_r and dV_f values) against the static I-V data. Most EDA
tools scale the ramp or use their own algorithms that do not
require the theses values.

Bob

Koller Katja wrote:
> Hello,
>
> does someone know if the ibischk4 checks if the static and
> dynamic curves fit together, when I have only a ramp for
> dynamic information?
>
> Thanks,
> Katja
>

-- 
Bob Ross
Teraspeed Consulting Group LLC     Teraspeed Labs
121 North River Drive              13610 SW Harness Lane
Narragansett, RI 02882             Beaverton, OR 97008
503-750-6481                       503-430-1065
http://www.teraspeed.com           503-246-8048 Direct
bob@teraspeed.com
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993