[IBIS-Users] warning with ibischk3.2

Hello,

  I am geting following warning in one of my differential cell when I
run ibischk3.2. Can anybody help me to find out how it come and where it
effect because I run my cell lebel simulation with this model and result
are near to spice.

WARNING - Model 'LVPECLDRV_3V3': TYP VI curves cannot drive through Vmeas=1V
          given load Rref=1e+06 Ohms to Vref=0.9V
WARNING - Model 'LVPECLDRV_3V3': MIN VI curves cannot drive through Vmeas=1V
          given load Rref=1e+06 Ohms to Vref=0.9V
WARNING - Model 'LVPECLDRV_3V3': MAX VI curves cannot drive through Vmeas=1V
          given load Rref=1e+06 Ohms to Vref=0.9Vak, Michael wrote:

>Regards
>
Akhilesh

>
>

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
Received on Fri Nov 5 05:16:22 2004