[IBIS-Users] on-die termination

    Hi all,

      How can I include on-die termination for an input structure in an IBIS
model?

      Some people say that one way to include on-die termination is to use
superposition and add the termination currents to the diode currents in the
clamp sections. However this action is going to avoid that the clamp curves
reach the zero value so the IBIS parser will report a error message.

     Do I have to use the keywords Rgnd and/or Rpower?
     When can I use “terminator” as my [model type]?

                                  Thanks.
      Ramiro
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
Received on Mon Feb 14 14:08:29 2005