[IBIS-Users] RE: [IBIS] query on modelling of diff pin for programmable buffers!

Mithlesh,

To be honest with you, I can't remember all the details
of the [Model Spec] rules, but I think you should be able
to use those too.  Just make sure you follow the rules
in the specification.  (If all else fails, read the manual).

Arpad
============================================================

-----Original Message-----
From: Mithlesh Shrivas [mailto:mithlesh.shrivas@freescale.com] 
Sent: Friday, February 18, 2005 3:37 AM
To: Muranyi, Arpad
Cc: ibis; ibis-users
Subject: Re: [IBIS] query on modelling of diff pin for programmable buffers!

Thanks Arpad for the reply. I got my answer.

|For the internal reference case, you could get by with making
|the model as if it was single ended, and define the Vinh and
|Vinl values around the internally generated reference voltage.

Can I use [model spec] to define my Vinl and Vinh for typ, min and max 
cases since it will give me a range for all the three cases? If yes, Can 
I use only vinh, vinl sub-parameters in [model spec] ?

With warm regards,
Mithlesh

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993