On Thursday 03 March 2005 01:16 am, Al Davis wrote: > The waveforms are measured with a particular load. As I > recall, that load is stated in "R_fixture", "C_fixture", > "L_fixture", and "V_fixture". If you have only one table of > a particular kind (rising or falling) anything that generates > that waveform into that load is valid. If you have two or > more, the combined information is used to refine the dynamic > impedance. > > One way to handle C_comp is to add it to C_fixture, which in > effect de-embeds it, then explicitly add the capacitor. The simulator does this internally. I didn't make that clear before. |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993Received on Thu Mar 3 01:23:22 2005
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2005 - 01:25:46 PST