Re: [IBIS] [IBIS-Users] s2ibis2.linux

From: Syed Huq <shuq_at_.....>
Date: Mon Mar 07 2005 - 09:24:41 PST
Hi,

I have noticed this as well. This is for either Solaris or Linux that
when you have dt numbers in pico-seconds, the 'p' has a gap. I believe
the number itself is ok (you should verify) and get around the bug by
deleting the 'gap'.

The R_pkg, L_pkg and C_pkg values are picked up form the .s2i file.
These are not used by s2ibis2 )in simulation I mean) so not sure why you
have gap for the unit as well. 

- Syed

On Mon, 2005-03-07 at 00:50, Vivek Kumar Sundriyal wrote:
> Syed ,
> 
>       I tried the new version. There are some minor bugs that i notice.
> 
>       In the .ibs file that is generated, i get the following errors :
> dV/dt_r          1.8875/61.3678  p   1.6680/0.1332n      2.0800/48.3146  p
> dV/dt_f          1.9070/59.6731  p   1.6785/0.1374n      2.0972/42.3047  p
> 
> (notice the gaps while printing the "p"...IBISCHK gives an obvious error)
> 
> Under the [package] keyword
> R_pkg            18.3600  m          16.5000  m          21.2000  m
> (here too notice the gaps in printing the "m")
> 
> -- Vivek
> 
> 
> 
> 
> 
>                                                                                                                    
>                       "Syed Huq"                                                                                   
>                       <shuq@cisco.com>         To:       "Vivek Kumar Sundriyal" <Vivek.Kumar.Sundriyal@nsc.com>   
>                       Sent by:                 cc:       ibis <ibis@eda.org>, ibis-users <ibis-users@eda.org>,     
>                       owner-ibis-users@         owner-ibis-users@eda.org                                           
>                       eda.org                  Subject:  Re: [IBIS] [IBIS-Users] s2ibis2.linux                     
>                                                                                                                    
>                                                                                                                    
>                       03/05/05 07:09 AM                                                                            
>                                                                                                                    
>                                                                                                                    
> 
> 
> 
> 
> Hi Vivek,
> 
> I have uploaded a new version of the Linux binary. Pls download one more
> time and try it out. Let me know if you have any problems:
> 
> http://www.eda.org/pub/ibis/s2ibis/s2ibis2_v1.1/
> 
> % file s2ibis2.linux
> s2ibis2.linux: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV),
> for GNU/Linux 2.2.5, dynamically linked (uses shared libs), stripped
> 
> This has been tested on RedHat7.3
> 
> - Syed
> 
> On Fri, 2005-03-04 at 03:33, Vivek Kumar Sundriyal wrote:
> > Hi ,
> >       I downloaded the s2ibis2.linux (the one ported by Cisco) from the site
> and
> > tried to run it on my linux machine. It gives me the following errors :
> >
> > [[svivek@machine1]] 55 % ls -l s2ibis2.linux
> > -rwxr-xr-x    1 svivek   wheel      134588 Mar  4 15:27 s2ibis2.linux*
> > [[svivek@machine1]] 56 % ./s2ibis2.linux
> > ./s2ibis2.linux: Command not found.
> > [[svivek@machine1]] 57 % s2ibis2.linux
> > s2ibis2.linux: Command not found.
> >
> >
> >       Can anyone let me know what the problem is ?
> >
> >       Do I have to recompile the source code provided by Cisco ?
> >
> > -- Thanks
> >
> > Vivek
> >
> >
> >
> >
> 
> >                       "Vivek Kumar
> 
> >                       Sundriyal"                  To:       ibis
> <ibis@eda.org>, ibis-users@eda.org,
> >                       <Vivek.Kumar.Sundriy         owner-ibis-users@eda.org
> 
> >                       al@nsc.com>                 cc:
> 
> >                       Sent by:                    Subject:  [IBIS-Users]
> s2ibis2 for linux
> >                       owner-ibis-users@eda
> 
> >                       .org
> 
> >
> 
> >
> 
> >                       03/04/05 11:22 AM
> 
> >
> 
> >
> 
> >
> >
> >
> >
> > Hi ,
> >
> >       I was trying to make s2ibis2 compile on linux. But I see some
> differences
> > in the results of the IBIS files generated by the solaris version and the
> linux
> > version .
> >
> >       Are there any issues with comiling the source code with Liinux ? Or am I
> > gng wrong somewhere ?
> >
> >
> > Thanks ,
> >
> > Vivek
> >
> >
> >
> >
> > |------------------------------------------------------------------
> > |For help or to subscribe/unsubscribe, email majordomo@eda.org
> > |with just the appropriate command message(s) in the body:
> > |
> > |  help
> > |  subscribe   ibis       <optional e-mail address, if different>
> > |  subscribe   ibis-users <optional e-mail address, if different>
> > |  unsubscribe ibis       <optional e-mail address, if different>
> > |  unsubscribe ibis-users <optional e-mail address, if different>
> > |
> > |or email a written request to ibis-request@eda.org.
> > |
> > |IBIS reflector archives exist under:
> > |
> > |  http://www.eda.org/pub/ibis/email_archive/  Recent
> > |  http://www.eda.org/pub/ibis/users_archive/  Recent
> > |  http://www.eda.org/pub/ibis/email/          E-mail since 1993
> >
> >
> >
> >
> >
> > -----------------------------------------------------------------
> > |For help or to subscribe/unsubscribe, email majordomo@eda.org
> > |with the appropriate command message(s) in the body:
> > |
> > |  help
> > |  subscribe   ibis       <optional e-mail address, if different>
> > |  subscribe   ibis-users <optional e-mail address, if different>
> > |  unsubscribe ibis       <optional e-mail address, if different>
> > |  unsubscribe ibis-users <optional e-mail address, if different>
> > |
> > |or email a request to ibis-request@eda.org.
> > |
> > |IBIS reflector archives exist under:
> > |
> > |  http://www.eda.org/pub/ibis/email_archive/  Recent
> > |  http://www.eda.org/pub/ibis/users_archive/  Recent
> > |  http://www.eda.org/pub/ibis/email/          E-mail since 1993
> |------------------------------------------------------------------
> |For help or to subscribe/unsubscribe, email majordomo@eda.org
> |with just the appropriate command message(s) in the body:
> |
> |  help
> |  subscribe   ibis       <optional e-mail address, if different>
> |  subscribe   ibis-users <optional e-mail address, if different>
> |  unsubscribe ibis       <optional e-mail address, if different>
> |  unsubscribe ibis-users <optional e-mail address, if different>
> |
> |or email a written request to ibis-request@eda.org.
> |
> |IBIS reflector archives exist under:
> |
> |  http://www.eda.org/pub/ibis/email_archive/  Recent
> |  http://www.eda.org/pub/ibis/users_archive/  Recent
> |  http://www.eda.org/pub/ibis/email/          E-mail since 1993
> 
> 
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
Received on Mon Mar 7 09:25:09 2005

This archive was generated by hypermail 2.1.8 : Mon Mar 07 2005 - 09:25:32 PST