[IBIS-Users] Resolved LVDS ZELV16TX1 Model issues

From: CW - Doran David <davidd_at_.....>
Date: Wed Jun 15 2005 - 13:57:16 PDT
Just wanted to thank all that helped me with my LVDS driver 
I-V vs. V-t curve mismatch warnings reported by IBIS parser.

Problem was caused by small bug in IV curve setup which 
did not sweep proper voltages.  

Now my Validation plot has both SPICE & IBIS waveforms
perfectly lined, and parser 4.1.1 is all clean.

Regards,
Doran

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
Received on Wed Jun 15 13:57:34 2005

This archive was generated by hypermail 2.1.8 : Wed Jun 15 2005 - 13:58:54 PDT