RE: [IBIS-Users] IBIS Question

From: Abdulrahman Rafiq <arafiq786_at_.....>
Date: Fri Jul 29 2005 - 18:02:47 PDT
Arpad, 

 

I would tend to agree with you, as pkg parasitic should also be included for
POWER and GND pins. Couldn't this be included as a requirement in the IBIS
Spec?

 

-Abbey 

 

Abdulrahman Rafiq

arafiq@ucsbalum.net 

  _____  

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf
Of Muranyi, Arpad
Sent: Wednesday, July 27, 2005 8:38 AM
To: ibis-users@eda.org
Subject: RE: [IBIS-Users] IBIS Question

 

Andy,

 

The problem is that the IBIS spec doesn't spell out that

the package parameters are also to be applied to power

and GND pins.  In my opinion they should be used for those

too, but it doesn't mean that all tool vendors do it.

 

Arpad

===========================================================

 

  _____  

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf
Of Andy Joe
Sent: Wednesday, July 27, 2005 4:18 AM
To: ibis-users@eda.org
Subject: [IBIS-Users] IBIS Question

Hi,

 

I have a question regarding the [Package] keyword in an IBIS file. As far as
I am concerned, the RLC values in this section applied to all the I/O pins,
my question is if these RLC values also applied to power and ground pins as
well? If they are not applied to power and ground pins, how can we address
the effects of different packages to the power and ground pins in an IBIS
model? (If R_pin, L_pin and C_pin for every single pin are not available,
only package min, typ and max RLC are available)

Thanks.

 

-Andy

  _____  

Start <http://us.rd.yahoo.com/evt=34442/*http:/www.yahoo.com/r/hs>  your day
with Yahoo! - make it your home page 



|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
Received on Fri Jul 29 18:02:52 2005

This archive was generated by hypermail 2.1.8 : Fri Jul 29 2005 - 18:05:05 PDT