[IBIS-Users] IBIS EBD files

Hello IBIS gurus,
 
I'm trying to determine how to specify an RC path in EBD format that looks like this:
 
J1----------------------C2---------------------------Tline------------------Rpullup
         |         \-------R2---------------/
         |
        C1
         |
         |
J2------- (GND)
 
 
I'm not sure how to describe the Path for the parallel C2, R2.
Here's what I've got:
Pin J1
   Fork
   L=0 C=2p / (this is C1 cap)
   Pin J2
   End Fork
L=0 C=4p /  (this is C2 cap)
 
L=58 L=? R=? C=? / (this would be my tline)
Node U21.1 (call to my pullup model)
 
How do I connect R2 in parallel with C2? Another fork staement?
 
Thanks,
Giovanni
 

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993