RE: [IBIS-Users] Per-Pin Distributed RLC Support

From: Tom Dagostino <tom_at_.....>
Date: Mon Oct 17 2005 - 17:39:17 PDT
Ray

Do any of the simulators support this?

Tom Dagostino
Teraspeed(R) Labs
13610 SW Harness Lane
Beaverton, OR 97008
503-430-1065
tom@teraspeed.com
www.teraspeed.com

Teraspeed Consulting Group LLC
121 North River Drive
Narragansett, RI 02882
401-284-1827

  -----Original Message-----
  From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org]On Behalf
Of Ray Anderson
  Sent: Monday, October 17, 2005 4:14 PM
  To: ibis-users@eda.org
  Cc: Ray Anderson
  Subject: [IBIS-Users] Per-Pin Distributed RLC Support


  In reviewing a large sampling of IBIS models from numerous vendors I have
yet to find any that implement the distributed RLC format as described in
the [Pin Numbers] section of the IBIS spec. (pages 117-120 in the 4.1 spec)



  I was wondering if anyone is aware of any published models that take
advantage of this method of describing package parasitics.



  Regards,



  -Ray





  Raymond Anderson

  Senior Signal Integrity Staff Engineer

  Product Technology Department

  Advanced Package R&D

  Xilinx Inc.







|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
Received on Mon Oct 17 17:39:27 2005

This archive was generated by hypermail 2.1.8 : Mon Oct 17 2005 - 17:39:36 PDT