Andy, Why not start using the *-AMS extensions of IBIS? Arpad Muranyi Intel Corporation ================================================== ________________________________ From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Andrew Ingraham Sent: Thursday, January 05, 2006 6:27 AM To: ibis-users@eda.org; ibis@eda.org Subject: [IBIS] Re: how to create the ibis of gigabit ethernet?? I've not looked closely at gigabit ethernet, but older 100 Mb/s ethernet had 3 voltage levels (+, -, and 0). I don't think IBIS can handle this sort of thing, since IBIS understands only two states: High and Low. I'd stick with SPICE models for the ethernet drop side of the interface. Regards, Andy |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993Received on Thu Jan 5 08:20:55 2006
This archive was generated by hypermail 2.1.8 : Thu Jan 05 2006 - 08:24:18 PST