[IBIS-Users] accuracy

From: Fabio BRINA <fabio.brina_at_.....>
Date: Wed Mar 08 2006 - 08:12:57 PST
Hi to all,

the curves of  IBIS model that my  s2ibis2 produces
have  two numbers after the dot:

   0.00      -15.78pA             -0.24nA            -10.56pA
   0.10          8.74mA              4.38mA             15.94mA
  ....

which is the manner to obtain a better accuracy ,
for example four numbers after dot ?  (using this version of s2ibis)

 0.00        -15.7823pA             -0.2434nA            -10.5622pA
 0.10            8.7412mA              4.3812mA             15.9452mA
  ....

many thanks.

Fabio



|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
Received on Wed Mar 8 08:24:39 2006

This archive was generated by hypermail 2.1.8 : Wed Mar 08 2006 - 08:27:56 PST