RE: [IBIS-Users] pulse/step description for v/t curves

From: NG,MEI-YEE <mei-yee.ng_at_.....>
Date: Wed Dec 20 2006 - 21:43:17 PST
Hi Sujit,

 

From my limited experience with s2ibis3, I discovered that the pulse
size was generated by dividing your sweep range by 100 points. If you
need to make it finer, you might need to edit the .spi files manually,
but keep in mind that the number of points allowed for version 3.2 is
100 only.

 

Thank you.

 

Best regards,

Mei Yee

SID, Avago Technologies (Malaysia)

Tel no.:604-6108515

________________________________

From: owner-ibis-users@server.eda.org
[mailto:owner-ibis-users@server.eda.org] On Behalf Of Sujit Kumar-r65837
Sent: Thursday, December 21, 2006 1:23 PM
To: Sujit Kumar-r65837
Cc: ibis-users@server.eda.org
Subject: [IBIS-Users] pulse/step description for v/t curves

 

hi IBIS users
Can anyone help me for this?

Sujit Kumar-r65837 wrote:



How to specify the pulse/step  description in .s2i file for  generating
v/t curves?
How do you reach upon those values?



-- 

thanks
sujit kumar




+91-120-4396069
+91-09910168788 

<mailto:sujit@freescale.com> 

 

-- 

thanks
sujit kumar




+91-120-4396069
+91-09910168788 

<mailto:sujit@freescale.com> 

 


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Thu, 21 Dec 2006 13:43:17 +0800

This archive was generated by hypermail 2.1.8 : Wed Dec 20 2006 - 21:43:48 PST