[IBIS-Users] check the series elements

From: Fabio BRINA <fabio.brina_at_.....>
Date: Fri Mar 30 2007 - 05:05:14 PDT
Hi  IBIS experts,

I have an IBIS model with  series elements.
There is a standard way to do the functional
check ( SPICE vs IBIS simulation compaire)
to consider these series elements?
or I have to ignore these elements
in this check?

Thank you,
Fabio



-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Fri Mar 30 05:07:36 2007

This archive was generated by hypermail 2.1.8 : Fri Mar 30 2007 - 05:08:48 PDT