[IBIS-Users] IBIS model behaviour with variable voltage source.

From: Amit KUMAR <amit-hpc.kumar_at_.....>
Date: Thu Jan 03 2008 - 21:44:20 PST
Hello All,

I have an IBIS model which reproduces the Spice waveform for all cases.
But when i connect an inductor to the power supply and then connect it 
to IBIS model then the results
i get for IBIS models and for spice do not match...
Is this observation a limitation of IBIS Models?

Thanks a lot
Amit


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Thu Jan 3 21:45:27 2008

This archive was generated by hypermail 2.1.8 : Thu Jan 03 2008 - 21:47:18 PST