Which "tool" are you using for this? Arpad ===================================== ________________________________ From: owner-ibis@server.eda.org [mailto:owner-ibis@server.eda.org] On Behalf Of Nekkondi, Hima Sent: Thursday, June 26, 2008 12:39 AM To: ibis-users@server.eda.org; ibis@server.eda-stds.org Subject: [IBIS] pwr/gnd clamp voltage range -vdd to 2vdd; Hi Experts, I wanted to create the voltage range for PWR/GND CLAMP from -VDD to +2VDD , but the tool generated voltage range is -Vcc to Vcc(GND_Clamp) & -Vcc to 0(PWR_Clamp). Can any one let me know how can i get the voltage range (-VDD to +2VDD). Regrads, Hima. -- This message has been scanned for viruses and dangerous content by MailScanner <http://www.mailscanner.info/> , and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Thu Jun 26 08:42:52 2008
This archive was generated by hypermail 2.1.8 : Thu Jun 26 2008 - 08:43:56 PDT