[IBIS-Users] s2ibis3 in debug mode

From: Babid A <babid_a_at_.....>
Date: Tue Jul 08 2008 - 11:31:23 PDT
All,
 
I am having issues while running s2ibis3 tool, it just hangs forever once it starts putout.spi simulation. Is it possible to run s2ibis3 in debug mode, so that I can see whats going on in the run time?
 
Thanks,
-Babid


      
-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Tue Jul 8 11:32:29 2008

This archive was generated by hypermail 2.1.8 : Tue Jul 08 2008 - 11:33:48 PDT