Dear All We want to start generating IBIS models for IO cells. I have gone through cookbook and various documents available on the internet. But I would like to know, how to actually start generating IBIS models ? Is there any tool that is used to generate IBIS 4.2 models ? Do we have to buy it or can it be downloaded for free from internet ? Or is it that I need to write a script that will run various simulations( for IV VT Clamp curves etc ) and then extract the data from those simulations to be put in IBIS format ? Please guide me as to what should be done in this regard. Thanks Ajay -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Mon Sep 8 02:28:41 2008
This archive was generated by hypermail 2.1.8 : Mon Sep 08 2008 - 02:30:15 PDT