Anshul, HyperLynx's IBIS editor doesn't give you errors because it is perfectly legal to have non-uniformly distributed points in the I-V and/or V-t tables. Arpad ===================================================== ________________________________ From: owner-ibis-users@server.eda.org [mailto:owner-ibis-users@server.eda.org] On Behalf Of Anshul Bansal Sent: Monday, October 27, 2008 10:52 AM To: al davis Cc: ibis-users@server.eda.org Subject: Re: [IBIS-Users] Rising falling waveform timestep Hello Al, Thanks for replying to my question. I think I understand that I can use unequal timsteps to get better accuracy of the waveforms. Hyperlynx is the editor that I am using to check the Syntax of the final IBIS file. I was just emphasizing the point that I get no syntax error when using unequal timesteps. Thanks, Anshul al davis wrote: On Monday 27 October 2008, Anshul Bansal wrote: I had a question regarding the timesteps for the rising/falling waveform. Is it legal to use unequal timestep for the rising or falling waveforms? The use of unequal timestep is preferred. You should use more points where they are needed to express detail and less points in relatively flat sections. It actually makes a difference. If your data looks like steps, with groups of consecutive values that are the same, you are using too many steps. It does matter. You may not see a problem because files like that are common so simulators will drop steps to make the waveform smooth and simulateable. I did not read anywhere in the IBIS spec that prevents me from doing so. Even Hyperlynx is able to read the IBIS file with unequal timestep and does not give any warnings/errors. What do you mean "even Hyperlynx" ???????? -- This message has been scanned for viruses and dangerous content by MailScanner <http://www.mailscanner.info/> , and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo_ f rom _eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request_ f rom _eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Mon Oct 27 10:21:45 2008
This archive was generated by hypermail 2.1.8 : Mon Oct 27 2008 - 10:23:38 PDT