[IBIS-Users] Call for IBIS 5.0 parser development bids!

The IBIS Open Forum has recently approved the IBIS 5.0 specification.  To aid industry adoption, the Open Forum would like to release a "golden parser" for IBIS 5.0 models, as it has for IBIS 4.2 and previous versions.  We are therefore soliciting bids from software developers to upgrade the existing parser to support IBIS 5.0 syntax.

Alterations to IBIS are approved through BIRDs (Buffer Issue Resolution Documents) which describe the changes in detail.  The new parser must support the updates in IBIS 5.0 as described in the BIRDs below:

	BIRD74.6      EMI Parameters
	BIRD95.6      Power Integrity Using IBIS
	BIRD98.3      Gate Modulation Effect (Table Format)
	BIRD103.1     [Model Spec] DDR2 Overshoot/Undershoot Parameters      
	BIRD104.1     Algorithmic Modeling API (AMI) Support in IBIS
	BIRD106       Clarification on Signal_pin Parameters
	BIRD107.2     Update to Algorithmic Modeling API (AMI) Support in IBIS

The full text of each of the BIRDs can be found at:

    http://www.eda.org/ibis/birds/

Please refer to the IBIS Version 5.0 specification for the final text of these features.  The document can be found at:

    http://www.eda.org/ibis/ver5.0/
 
We are seeking an estimate of the time and cost of developing an IBIS 5.0 parser, plus additional modules, according to these requirements.  Compatibility with previous versions is required and the use of current parser source code is assumed.  Note that the source for the parser is not distributed except under paid license from the IBIS Open Forum. 

While we will look at each proposal a whole, we do weigh heavily flexibility, level of interaction possible and knowledge of IBIS, as interpretation or technical issues may arise that require discussion.  Note that the parser development schedule and scope is contingent on the ability of the IBIS Open Forum to raise sufficient funds to cover parser costs.  The IBIS Open Forum may opt for a reduced list of features depending upon the funds that are available, on a mutually-agreed schedule.

If you are interested, please request a bid packet, which contains detailed information on parser requirements.  Bid submissions must be received no later than March 1.  Proposals and bid packet requests should be sent to Michael Mirmak, IBIS Open Forum Chair, using the contact information below.
 
Thank you!
 
 - Michael Mirmak
   Intel Corp.
   Chair, IBIS Open Forum

   michael.mirmak@intel.com
   FM5-239
   1900 Prairie City Rd.
   Folsom, CA  95630
   (916) 356-4261 (voice)
   (916) 377-3788 (FAX)

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993