Re: [IBIS-Users] IBIS - AMI - questions

Arpad,

Your statement

"The SiSoft example uses a "proprietary" CSV file format for entering 
the parameters"

is incorrect.  I can see how you might think that if you hadn't read the 
kit doc completely, but the statement is still incorrect.

The .ami file included in the SiSoft kit is a full and proper .ami 
file.  The utility ami2csv is used to convert the .ami data to the .csv 
format that the standalone simulator uses.  Thus, the use model is 
intended to be:

.ami file --> ami2csv --> standalone simulation test bench

Yes, the standalone simulator does not read the .ami file directly ... 
no one ever promised that it would.  Nonetheless, the SiSoft toolkit 
provides a defined mechanism for utilizing compliant .ami files.

Todd.

Todd Westerhoff
VP, Software Products
SiSoft
6 Clock Tower Place, Suite 250
Maynard, MA 01754
(978) 461-0449 x24
twesterh@sisoft.com
www.sisoft.com



Muranyi, Arpad wrote:
> Anand,
>
> The only examples I am aware of on the web are the
> SiSoft and Cadence AMI evaluation tool kits.
>
> These have a Tx and an Rx model, including their
> source code, and an executable which will let you
> run them.  There is no IBIS file there, since as
> I told you before, there is really not much in an
> IBIS file other than a pointer.
>
> http://www.vhdl.org/pub/ibis/macromodel_wip/archive/20080523/sisoft/SiSo
> ft_IBIS-AMI_Eval_Toolkit_v2_10.zip
> http://www.vhdl.org/pub/ibis/macromodel_wip/archive/20080523/cadence/Cad
> ence_IBIS_AMI_Evaluation_Toolkit_v2_1a.zip
>
> Unfortunately these examples do not have a "healthy"
> example of a parameter file (.ami) so you can't
> use them to learn proper .ami file syntax.  The
> SiSoft example uses a "proprietary" CSV file format
> for entering the parameters and the Cadence example
> uses an unofficial subset of the .ami tree format.
>
> Arpad
> ==================================================== 
>
> -----Original Message-----
> From: Anand Ramalingam [mailto:anandr@Magma-DA.COM] 
> Sent: Friday, June 12, 2009 3:48 PM
> To: Muranyi, Arpad; ibis-users@eda.org
> Subject: RE: [IBIS-Users] IBIS - AMI - questions
>
> Hi Arpad,
>
> Thanks for your prompt reply and the pointers. 
>
> [Arpad]
>
> 3)  A full fledged .IBS file alone is not going to help you much
>     because there is really not much in the .IBS file other than a
>     pointer to the AMI DLL and its parameter file (.ami).  What you
>     need is a good example (i.e. a working DLL) with an appropriate
>     parameter file (.ami) and a simulator that can run them.
>
> [Anand] By any chance do we have a complete example (with ibis/dll/ami
> files) on the web which I can download and simulate?
>
> Thanks
> Anand
>
>   

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993