Servus Eckhard, Hello Timothy, Thanks for your feedback. I'm sure I'll get my act together with this to help me! Eckhard, to answer your questions: - Only warnings are for encrypted content (models) which is normal and then one for a node without DC path. But it is autoconnected to the right node anyway, so it should not matter. - I did not try a "slow" transient extraction, I have used only the testbenches provided by s2ibis3 and the other tool. - Nope, the curves reflect this "jumpy" behaviour. But IBISCHK5 does not mind a bit. Best regards, Lars -- Those who can, Do Those who can't, Simulate -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Tue Dec 15 08:52:31 2009
This archive was generated by hypermail 2.1.8 : Tue Dec 15 2009 - 08:54:03 PST