Eric:
A better place to have this discussion is on the SI list.
We do not allow vendor-specific discussions on the IBIS lists.
If anyone wants to respond, respond privately to Eric.
Bob
Eric Monteiro wrote:
> Hello
>
> Forgive me if I posted this is the wrong place.
>
> I have been looking at channel designers from Mentor, Cadence, SiSoft, and Sigrity that claim to support AMI models. However, to date I have only seen Sigrity's channel designer support AMI models "out of the box", and can generate the BER curves, and statistical eye's.
>
> In the case of Mentor, it looks like they only have special support for the Xilinx models embedded within the kit (? is this correrct ?). I assume this means Mentor does not yet have a tool where you can take any vendors AMI model and just drop into a schematic unless you work with them to develop a kit similar to Xilinx.
>
> Does anyone know how Mentor (Hyperlynx GHz), Cadence (Signal Explorer), and SiSoft (Quantum Channel Designer) support out of the box AMI models?
>
> Best Regards,
> Eric
>
> This communication contains confidential information intended only for the addressee(s). If you have received this communication in error, please notify us immediately and delete this communication from your mail box.
>
-- Bob Ross Teraspeed Consulting Group LLC Teraspeed Labs 121 North River Drive 13610 SW Harness Lane Narragansett, RI 02882 Beaverton, OR 97008 401-284-1827 503-430-1065 http://www.teraspeed.com 503-246-8048 Direct bob@teraspeed.com Teraspeed is a registered service mark of Teraspeed Consulting Group LLC -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Wed Feb 3 07:14:24 2010
This archive was generated by hypermail 2.1.8 : Wed Feb 03 2010 - 07:14:29 PST