[IBIS-Users] RE: [SI-LIST] Ibis model Receiver help.

From: Tom Dagostino <tom@teraspeed.com>
Date: Thu Nov 04 2010 - 09:42:06 PDT

Have you considered an EBD model for this?

 

Tom Dagostino

Teraspeed Labs

13610 SW Harness Lane

Beaverton, OR 97008

503-430-1065

tom@teraspeed.com

www.teraspeed.com

 

Teraspeed Consulting Group LLC

121 North River Drive
Narragansett, RI 02882

401-284-1827

www.teraspeed.com

 

From: Peter LaFlamme [mailto:plaflamm@apm.com]
Sent: Thursday, November 04, 2010 5:40 AM
To: tom@teraspeed.com
Cc: ibis@eda.org; ibis-users@eda.org; si-list@freelists.org;
peterlaflamme@comcast.net
Subject: Re: [SI-LIST] Ibis model Receiver help.

 

Hi Tom and others,

Thanks for all the help so far. The circuit between the pins includes AC
coupling and rebias. Though the rebias is irrelevant the termination
resistor and 2 inductors are also included. Thus the clamp data will only be
a part of the model. I need to represent the AC coupling and termination
circuit. Is there any way to do this? I understand that I can tell people to
add these components to their simulations in such a fashion along with the
package model. However, it makes things a bit more complicated. I would
like to find a solution that would work within the model so the user does
not have to do anything special.

 

 

Thanks,

Peter

 

 

On Wed, Nov 3, 2010 at 11:37 AM, Tom Dagostino <tom@teraspeed.com> wrote:

Peter

This is one of those questions that has the "it depends" answer. What is
the additional circuitry and which simulator are you trying to use are key
elements that have a strong bearing on the answer.

Regards,

Tom Dagostino
Teraspeed Labs
13610 SW Harness Lane
Beaverton, OR 97008
503-430-1065
tom@teraspeed.com
www.teraspeed.com <http://www.teraspeed.com/>

Teraspeed Consulting Group LLC
121 North River Drive
Narragansett, RI 02882
401-284-1827
www.teraspeed.com <http://www.teraspeed.com/>

-----Original Message-----
From: si-list-bounce@freelists.org [mailto:si-list-bounce@freelists.org] On
Behalf Of Peter LaFlamme
Sent: Wednesday, November 03, 2010 5:34 AM
To: ibis@eda.org; ibis-users@eda.org; si-list@freelists.org;
peterlaflamme@comcast.net
Subject: [SI-LIST] Ibis model Receiver help.

>
> Hi All,
> I have a differential receiver model which has an internal 100-ohm series
> resistor. However there is other circuitry between the P and N pins. Can
> someone tell me if there is a way to use the [series resistor] keyword to
> model this or is there another way to add this to the ibis model?
>

> Thanks,
> Peter
>

CONFIDENTIALITY NOTICE: This e-mail message, including any attachments,
is for the sole use of the intended recipient(s) and contains information
that is confidential and proprietary to AppliedMicro Corporation or its
subsidiaries.
It is to be used solely for the purpose of furthering the parties' business
relationship.
All unauthorized review, use, disclosure or distribution is prohibited.
If you are not the intended recipient, please contact the sender by reply
e-mail
and destroy all copies of the original message.

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@freelists.org with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@freelists.org with 'help' in the Subject field

List technical documents are available at:
               http://www.si-list.net <http://www.si-list.net/>

List archives are viewable at:
               http://www.freelists.org/archives/si-list

Old (prior to June 6, 2001) list archives are viewable at:
               http://www.qsl.net/wb6tpu

 

CONFIDENTIALITY NOTICE: This e-mail message, including any attachments,
is for the sole use of the intended recipient(s) and contains information
that is confidential and proprietary to AppliedMicro Corporation or its
subsidiaries.
It is to be used solely for the purpose of furthering the parties' business
relationship.
All unauthorized review, use, disclosure or distribution is prohibited.
If you are not the intended recipient, please contact the sender by reply
e-mail
and destroy all copies of the original message.
 

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Thu Nov 4 09:43:00 2010

This archive was generated by hypermail 2.1.8 : Thu Nov 04 2010 - 09:43:32 PDT