RE: [IBIS-Users] : Validation setup for Diff driver

Hi Shiju,

Just for your reference, please see the following setups which I usually use to do a quick correlation between differential IBIS driver (ie LVDS) and its SPICE. Please let me know if there is any concern. Thank you.

[cid:image001.jpg@01CB87D9.8CC736B0]

Best regards,
Chee Pin

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf Of shiju.abraham@wipro.com
Sent: Wednesday, November 17, 2010 10:18 PM
To: ibis-users@eda.org
Subject: [IBIS-Users] : Validation setup for Diff driver

Hi,

I am using the below setup to validate differential driver ibis model against its spice,

[cid:image004.jpg@01CB87D9.4C0A0850]

Is this a proper validation setup? If not, Can anyone give me a proper or commonly used validation setup for differential driver?

Thanks,
Shiju

Please do not print this email unless it is absolutely necessary.

The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments.

WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.

www.wipro.com

--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.
________________________________
Confidentiality Notice.
This message may contain information that is confidential or otherwise protected from disclosure. If you are not the intended recipient, you are hereby notified that any use, disclosure, dissemination, distribution, or copying of this message, or any attachments, is strictly prohibited. If you have received this message in error, please advise the sender by reply e-mail, and delete the message and any attachments. Thank you.
-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda-stds.org/pub/ibis/email_archive/ Recent
| http://www.eda-stds.org/pub/ibis/users_archive/ Recent
| http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993