1st of all, thanks.
No, it's not s2ibis, I can't use it here...
It's a script which takes measurements, and then inserts them to the
model.
I can model a single ended buffer.
But say I have out_pin1, and out_pin2, same single ended open_sink,
which are connected via [Diff Pin] model.
How do I create 1 instance, which has two pins in_1 and in_2, which
drives them?
I am also trying to see if they'd go for using two instances which call
for models, w/o referring to the pins' names.
I need it for my customer's customers.
-Lior
From: naftali refaeli [mailto:Naftali.Refaeli@ecitele.com]
Sent: Tuesday, July 26, 2011 3:34 PM
To: Lior Dagan
Subject: RE: A newbie question
What tool do you use for IBIS? Is it s2ibis?
Can you model a single (not diff) buffer?
Naftali Refaeli
CAE Engineer
ITO
HP Enterprise Services
Telephone +972 3.9266973
Mobile +972 52.3542043
Email Naftali.Refaeli@ecitele.com
From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On
Behalf Of Lior Dagan
Sent: Tuesday, July 26, 2011 3:24 PM
To: ibis-users@eda.org
Subject: [IBIS-Users] A newbie question
Hello all.
I am writing a model for my customers.
Their requirements are:
Use version 3.2.
2 Differential Open_sink pins.
Use the IBIS full component model (i.e, not a pin model but connect the
whole block).
Use Spectre.
The question is: How do I define for the instance it's input pins (that
stimulate the two open_sink pins)?
I have looked at both Cadence manuals and yours, and could not find an
answer..
Thanks,
Lior Dagan, CAD engineer @ TranSwitch
Cell: +972-52-3401068
-- This message has been scanned for viruses and dangerous content by MailScanner <http://www.mailscanner.info/> , and is believed to be clean. This e-mail message is intended for the recipient only and contains information which is CONFIDENTIAL and which may be proprietary to ECI Telecom. If you have received this transmission in error, please inform us by e-mail, phone or fax, and then delete the original and all copies thereof. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Tue Jul 26 05:44:34 2011
This archive was generated by hypermail 2.1.8 : Tue Jul 26 2011 - 05:44:43 PDT