[IBIS-Users] RE: [IBIS] Valid Matrices

Fabio,

That is currently correct for the IBIS package and EBD models.
For the IBIS-ISS specification you can have everything that
is supported by the W-element or S-parameter models.  We are
now working very hard to make IBIS-ISS available for IBIS
package and on-die interconnect modeling.

I hope this helps,

Arpad
===============================================================

From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Fabio BRINA
Sent: Thursday, November 22, 2012 3:20 AM
To: ibis@eda.org; ibis-users@eda.org
Subject: [IBIS] Valid Matrices

Hello Experts,

   In the IBIS Manual I read only about [Resistance Matrix], [Inductance Matrix]
     and [Capacitance Matrix]. Are only these valid Matrices?
     Is  [Conductance Matrix]  an invalid Matrix for the IBIS standard?

   Thank you in advance,

Regards,
Fabio



--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org
|or ibis-request@eda-stds.org
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/ibis/email_archive/ Recent
|  http://www.eda-stds.org/ibis/users_archive/ Recent
|  http://www.eda-stds.org/ibis/email/         E-mail since 1993