Hi, Please guide me in the following query which I got from one of my customer, Question: How i can assign a tri state model? I need to simulate a local bus data line in which ibis model is a member which need to be tri stated. Please let me know what need to be done and what is he asking. I appreciate quick response. Regards, Girija This message and any attachments may contain Cypress (or its subsidiaries) confidential information. If it has been received in error, please advise the sender and immediately delete this message. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org |or ibis-request@eda-stds.org | |IBIS reflector archives exist under: | | http://www.eda-stds.org/ibis/email_archive/ Recent | http://www.eda-stds.org/ibis/users_archive/ Recent | http://www.eda-stds.org/ibis/email/ E-mail since 1993Received on Mon Jun 24 00:09:39 2013
This archive was generated by hypermail 2.1.8 : Mon Jun 24 2013 - 00:10:41 PDT