[IBIS-Users] Re: [IBIS] Overclocking effect with composite current

joy

we at Teraspeed would like to see comparisons between physical measurements
and simulation that validate your proposed approach. Without this, your
approach is an interesting academic exercise in translating from one
approximate modeling format (Spice) to another approximate modeling format
(Cadence-IBIS-Spice).  You may be solving a problem, but not "the problem."
 I recognize that "the problem" may not be solved without non-linear
modeling.

regards,

Scott



On Mon, Feb 3, 2014 at 2:45 PM, Joy Li <joyli@cadence.com> wrote:

> Hi Rinsha,
>
>
>
> At this time, there is no further documentation available publicly.
>
>
>
> To enable the industry to consolidate on a single approach, we may at some
> time in the future disclose more details concerning our approach to the
> IBIS committee for consideration as part of the standard or best practices
> documentation.
>
>
>
> Joy Li
>
> Cadence
>
>
>
> *From:* owner-ibis@eda.org [mailto:owner-ibis@eda.org] *On Behalf Of *Rinsha
> Reghunath
> *Sent:* Monday, February 03, 2014 9:29 AM
> *To:* ibis@eda.org; ibis-users@eda.org
> *Subject:* [IBIS] Overclocking effect with composite current
>
>
>
> Hello,
>
>
>
> The following paper discusses about the solution for overclocking with
> composite current: http://www.eda.org/ibis/summits/nov13c/sun.pdf
>
>
>
> Is there any other documentation further explaining this technique or
> could someone please give more insight on this?
>
>
>
> Thanks,
>
> Rinsha
>
>
> --
> This message has been scanned for viruses and
> dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is
> believed to be clean.
>
> --
> This message has been scanned for viruses and
> dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is
> believed to be clean.
>



-- 

Scott McMorrow
Teraspeed Consulting Group LLC
16 Stormy Brook Rd
Falmouth, ME 04105

(401) 284-1827 Business

http://www.teraspeed.com

Teraspeed® is the registered service mark of
Teraspeed Consulting Group LLC

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org
|or ibis-request@eda-stds.org
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/ibis/email_archive/ Recent
|  http://www.eda-stds.org/ibis/users_archive/ Recent
|  http://www.eda-stds.org/ibis/email/         E-mail since 1993