Hi all I am trying to model true differential buffer following the “*Series model approach”* at http://www.vhdl.org/ibis/summits/oct03/muranyi.pdf. ). I am assuming that a differential buffer should have some sort of differential current that would flow from PADP to PADN when the two nodes are at different voltages. I am trying to sweep PADP and PADN voltages to see current between the two PADS. However. the currents I see are in nano-Amps indicating that there is almost no differential current. Current into PADN is almost independent of DC-voltage forced on PADP. Is this an expected behavior or am I missing something in this activity? DC sweep is applied on padn and padp is kept at different voltages (-1.2 to 2.4 in steps of 0.4V) . Regards Shivani *Detailed snapshots shown here * *https://www.blogger.com/blogger.g?blogID=1357760498839013626#editor/target=post;postID=2986411014708903686;onPublishedMenu=posts;onClosedMenu=posts;postNum=0;src=postname <https://www.blogger.com/blogger.g?blogID=1357760498839013626#editor/target=post;postID=2986411014708903686;onPublishedMenu=posts;onClosedMenu=posts;postNum=0;src=postname>* -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org |or ibis-request@eda-stds.org | |IBIS reflector archives exist under: | | http://www.eda-stds.org/ibis/email_archive/ Recent | http://www.eda-stds.org/ibis/users_archive/ Recent | http://www.eda-stds.org/ibis/email/ E-mail since 1993Received on Wed Oct 15 10:20:32 2014
This archive was generated by hypermail 2.1.8 : Wed Oct 15 2014 - 10:21:07 PDT