thanks Arpad If buffer input signal is PRBS-7, 2.5Gbps, there would be many frequency components in the signal. So what should most likely operating frequency be in this case? Regards Shivani On Tue, Nov 11, 2014 at 9:12 PM, Muranyi, Arpad <Arpad_Muranyi@mentor.com> wrote: > Shivani, > > > > #1) The V-t data in IBIS models includes the C_comp effects, this > > is why C_comp shouldn’t be visible from the inside, because that > > means that the V-t data is not loaded by C_comp to slow it down. > > An IBIS simulator should reproduce the V-t data if you load the > > buffer with the same V_fixtre and R_fixture load with which the > > V-t data was generated, no matter what C_comp value you have. > > > > #2) You should use the frequency for obtaining C_comp which is > > most representative of the buffer’s signal frequency. > > > > I hope this helps, > > > > Arpad > > ===================================================================== > > > > *From:* owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] *On > Behalf Of *Shivani Sharma > *Sent:* Tuesday, November 11, 2014 4:57 AM > *To:* ibis-users@eda.org > *Subject:* [IBIS-Users] c_comp calculation > > > > Hi all > > > > I have a few queries- > > > > 1. C-comp is invisible looking from inside but visible looking from > outside of Tx driver model. In IBIS, does V-t include c_comp effects?. > During spectre sims, changing pad capacitance does change V-t data. > > > > 2. To calculate c_comp, how is most likely operating frequency of buffer > decided. > > > > > > thanks > > Shivani > > > -- > This message has been scanned for viruses and > dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is > believed to be clean. > > -- > This message has been scanned for viruses and > dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is > believed to be clean. > -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org |or ibis-request@eda-stds.org | |IBIS reflector archives exist under: | | http://www.eda-stds.org/ibis/email_archive/ Recent | http://www.eda-stds.org/ibis/users_archive/ Recent | http://www.eda-stds.org/ibis/email/ E-mail since 1993Received on Tue Nov 11 20:55:42 2014
This archive was generated by hypermail 2.1.8 : Tue Nov 11 2014 - 20:56:24 PST