From: owner-ibis-users@eda-stds.org (ibis-users) To: ibis-users-digest@eda-stds.org Subject: ibis-users V1 #84 Reply-To: Sender: owner-ibis-users@eda-stds.org Errors-To: owner-ibis-users@eda-stds.org Precedence: bulk ibis-users Thursday, August 3 2006 Volume 01 : Number 084 ---------------------------------------------------------------------- Date: Wed, 24 May 2006 08:17:19 -0700 From: "Mirmak, Michael" Subject: [IBIS-Users] IBIS Reflector Policy Reminder All, Just a as reminder, the IBIS e-mails reflectors are for discussion of IBIS technical issues plus administrative topics related to the standard itself. The reflectors should not be used for discussion of specific vendors or their products. - - Michael Mirmak Intel Corp. Chair, EIA IBIS Open Forum |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Thu, 25 May 2006 10:56:47 +0900 From: "Xuefeng Chen" Subject: RE: [IBIS-Users] IV curves do not pass through origin Hi Andy, Thank you! Regards Xuefeng - -----Original Message----- From: owner-ibis-users@eda.org on behalf of Andrew Ingraham Sent: Tue 5/23/2006 9:57 PM To: ibis-users@eda.org Subject: Re: [IBIS-Users] IV curves do not pass through origin > I wonder If it's proper that IV curves do not cross origin. Where is > the I or V source? It's fairly easy for the curves to not cross the origin. A simple case of this, is when the output buffer has resistors (or weak FETs that are always on) between the output pin and power and ground. I don't know why those would be used in an output buffer that can't be tri-stated. Regards, Andy |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993 |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Tue, 30 May 2006 08:27:20 -0700 From: "Syed Huq \(shuq\)" Subject: [IBIS-Users] First Call for Papers - IBIS Summit at DAC 2006 - ----------------------------------------------------------------------- IBIS SUMMIT FIRST CALL FOR PARTICIPATION & PRESENTATIONS - ----------------------------------------------------------------------- I B I S S U M M I T M E E T I N G Time/Date: Tuesday July 25, 2006, 8:00 AM to 5:00 PM Location: Hotel TBD near Moscone Center San Francisco, CA Content: Presentations and Discussions Purpose: Solicit and Exchange IBIS Model Related Information and Ideas. Sponsors: IBIS Open Forum If your company would be interested in sponsoring this event, please contact Syed Huq . Sponsorship is available for the room, lunch, and coffee breaks. DAC: July 24 - 28, 2006 Moscone Center San Francisco, California FREE Exhibit Pass is available on Monday only. See for more information. BACKGROUND The Design Automation Conference (DAC) is the premier Electronic Design Automation (EDA) and silicon solution event. DAC features over 50 technical sessions covering the latest in design methodologies and EDA tool developments in addition to an exhibit floor, with combined booth and demo suites, showcasing over 200 of the leading EDA, silicon and IP providers. Topics of current interest to the EIA IBIS Open Forum are addressed at DAC. This meeting will be conducted as a formal IBIS Summit Meeting. Presentations are expected to be available and archived in an electronic format, and minutes of the meeting will be issued. Any pending formal decisions (votes) will be announced at least two weeks prior to the meeting. The annual election of officers will be held. Nominations can be sent to Syed Huq or made at the meeting. CALL FOR PARTICIPANTS People involved in IBIS Model development, EDA tool development, and digital circuit design are invited to participate to the Summit meeting. If you plan to participate, please register with the information below: Name: E-mail address: Company: Telephone: Send to: Syed Huq at Cisco Systems, Inc (shuq@cisco.com) CALL FOR PRESENTATIONS We are seeking presentations from individuals who have IBIS experiences or issues. Format of Presentation: LCD Projection with Windows laptop. Time: 15-30 Minutes Electronic Archival: We request electronic versions so that the presentations can be archived and also made available to non-attendees. Formats can be Power Point and/or Acrobat. Electronic presentations should be made available by July 20, 2006 for uploading and copying to the presentation laptop. If you plan a presentation, please supply Title: Presenter: E-mail address: Company: Telephone: Estimate Time: Send this to: Syed Huq (shuq@cisco.com) AGENDA The agenda includes presentations, discussions, breaks, and a luncheon (which will be provided). This will be developed as presentation proposals are received. LIST OF NEARBY HOTELS See for travel directions, hotels and other information. |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Tue, 13 Jun 2006 07:59:46 -0700 From: "Syed Huq \(shuq\)" Subject: [IBIS-Users] Second call for Papers - IBIS Summit at DAC 2006 (July25th) - ----------------------------------------------------------------------- IBIS SUMMIT SECOND CALL FOR PARTICIPATION & PRESENTATIONS - ----------------------------------------------------------------------- I B I S S U M M I T M E E T I N G Time/Date: Tuesday July 25, 2006, 8:00 AM to 5:00 PM Location: Hotel TBD near Moscone Center San Francisco, CA Content: Presentations and Discussions Purpose: Solicit and Exchange IBIS Model Related Information and Ideas Sponsors: IBIS Open Forum If your company would be interested in sponsoring this event, please contact Syed Huq . Sponsorship is available for the room, lunch, and coffee breaks. DAC: July 24 - 28, 2006 Moscone Center San Francisco, California FREE Exhibit Pass is available on Monday only. See for more information. BACKGROUND The Design Automation Conference (DAC) is the premier Electronic Design Automation (EDA) and silicon solution event. DAC features over 50 technical sessions covering the latest in design methodologies and EDA tool developments in addition to an exhibit floor, with combined booth and demo suites, showcasing over 200 of the leading EDA, silicon and IP providers. Topics of current interest to the EIA IBIS Open Forum are addressed at DAC. This meeting will be conducted as a formal IBIS Summit Meeting. Presentations are expected to be available and archived in an electronic format, and minutes of the meeting will be issued. Any pending formal decisions (votes) will be announced at least two weeks prior to the meeting. ELECTION OF OFFICERS The annual election of officers will be held. Nominations can be sent to Syed Huq or made at the meeting for these positions: Chair, Vice Chair, Secretary, Librarian, Webmaster, and Postmaster CALL FOR PARTICIPANTS People involved in IBIS Model development, EDA tool development, and digital circuit design are invited to participate to the Summit meeting. If you plan to participate, please register with the information below: Name: E-mail address: Company: Telephone: Send to: Syed Huq (shuq@cisco.com) CALL FOR PRESENTATIONS We are seeking presentations from individuals who have IBIS experiences or issues. Format of Presentation: LCD Projection with Windows laptop. Time: 15-30 Minutes Electronic Archival: We request electronic versions so that the presentations can be archived and also made available to non-attendees. Formats can be Power Point and/or Acrobat. Electronic presentations should be made available by July 20, 2006 for uploading and copying to the presentation laptop. If you plan a presentation, please supply Title: Presenter: E-mail address: Company: Telephone: Estimate Time: Send this to: Syed Huq (shuq@cisco.com) AGENDA The agenda includes presentations, discussions, breaks, and a luncheon (which will be provided). This will be developed as presentation proposals are received. The following presentations or topics are tentatively planned: IBIS Roadmap Quite Line Experiments and BIRD97/BIRD98 Serdes Introduction and Options for Macro-Modeling Frequency Dependent Modeling Topic Possibly Standardized Encryption Possibly BIRD95/Power Delivery Topic Election of IBIS Officers LIST OF NEARBY HOTELS See for travel directions, hotels and other information. |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Fri, 23 Jun 2006 10:22:51 -0700 From: "Mirmak, Michael" Subject: [IBIS-Users] Important Changes to IBIS Reflectors As some of you may have seen, the eda.org domain has been "hijacked" by a third party outside the United States. At this point, attempts to recover the domain are continuing but access to the domain is intermittent at best. To enable reliable communication, the system operators have created a new domain, eda-stds.org, for use as a web and mailing list home. As a result, the addresses for one of the IBIS websites and both reflectors have changed. To access the website, visit http://www.eda-stds.org/ibis/ (the official site at http://www.eigroup.org/ibis is unaffected). You may also visit the aliases http://www.verilog.org/ibis/ or http://www.vhdl.org/ibis. Most website links have already been migrated to the new addresses. For the reflectors, the IBIS reflector may now be accessed at ibis@eda-stds.org. Similarly, the IBIS Users reflector is available for posting through ibis-users@eda-stds.org. The verilog.org and vhdl.org aliases should also work. Please use the new addresses when sending mail to the lists. Thank you for your patience. - - Michael Mirmak Intel Corp. Chair, EIA IBIS Open Forum |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Fri, 23 Jun 2006 10:22:51 -0700 From: "Mirmak, Michael" Subject: [IBIS-Users] Important Changes to IBIS Reflectors As some of you may have seen, the eda.org domain has been "hijacked" by a third party outside the United States. At this point, attempts to recover the domain are continuing but access to the domain is intermittent at best. To enable reliable communication, the system operators have created a new domain, eda-stds.org, for use as a web and mailing list home. As a result, the addresses for one of the IBIS websites and both reflectors have changed. To access the website, visit http://www.eda-stds.org/ibis/ (the official site at http://www.eigroup.org/ibis is unaffected). You may also visit the aliases http://www.verilog.org/ibis/ or http://www.vhdl.org/ibis. Most website links have already been migrated to the new addresses. For the reflectors, the IBIS reflector may now be accessed at ibis@eda-stds.org. Similarly, the IBIS Users reflector is available for posting through ibis-users@eda-stds.org. The verilog.org and vhdl.org aliases should also work. Please use the new addresses when sending mail to the lists. Thank you for your patience. - - Michael Mirmak Intel Corp. Chair, EIA IBIS Open Forum |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993 |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Fri, 23 Jun 2006 10:22:51 -0700 From: "Mirmak, Michael" Subject: [IBIS-Users] [IBIS] Important Changes to IBIS Reflectors As some of you may have seen, the eda.org domain has been "hijacked" by a third party outside the United States. At this point, attempts to recover the domain are continuing but access to the domain is intermittent at best. To enable reliable communication, the system operators have created a new domain, eda-stds.org, for use as a web and mailing list home. As a result, the addresses for one of the IBIS websites and both reflectors have changed. To access the website, visit http://www.eda-stds.org/ibis/ (the official site at http://www.eigroup.org/ibis is unaffected). You may also visit the aliases http://www.verilog.org/ibis/ or http://www.vhdl.org/ibis. Most website links have already been migrated to the new addresses. For the reflectors, the IBIS reflector may now be accessed at ibis@eda-stds.org. Similarly, the IBIS Users reflector is available for posting through ibis-users@eda-stds.org. The verilog.org and vhdl.org aliases should also work. Please use the new addresses when sending mail to the lists. Thank you for your patience. - - Michael Mirmak Intel Corp. Chair, EIA IBIS Open Forum - ----------------------------------------------------------------- |For help or to subscribe/unsubscribe, email majordomo@eda.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or email a request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993 |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Mon, 26 Jun 2006 20:14:57 +0400 From: "hateful. placehope" Subject: Further confirmed - ------=_NextPart_000_000E_01C6995D.3200F690 Content-Type: multipart/alternative; boundary="----=_NextPart_001_000F_01C6995D.3200F690" - ------=_NextPart_001_000F_01C6995D.3200F690 Content-Type: text/plain; charset="windows-1250" Content-Transfer-Encoding: quoted-printable rational. polis namedlest curious shouldbe demerits. - ------=_NextPart_001_000F_01C6995D.3200F690 Content-Type: text/html; charset="windows-1250" Content-Transfer-Encoding: quoted-printable
rational.
polis
namedlest curious
shouldbe demerits.
- ------=_NextPart_001_000F_01C6995D.3200F690-- - ------=_NextPart_000_000E_01C6995D.3200F690 Content-Type: image/gif; name="major.gif" Content-Transfer-Encoding: base64 Content-ID: <000d01c6997e$b9129690$c036eb47@performance> R0lGODdhawHhAIcAAAAAAIAAAACAAICAAAAAgIAAgACAgMDAwKyomezp2P/78KCgpICAgP8A AAD/AP//AAAA//8A/wD//////wAAAIAAAACAAICAAAAAgIAAgACAgMDAwKyomezp2P/78KCg pICAgP8AAAD/AP//AAAA//8A/wD//////wAAAIAAAACAAICAAAAAgIAAgACAgMDAwKyomezp 2P/78KCgpICAgP8AAAD/AP//AAAA//8A/wD//////wAAAIAAAACAAICAAAAAgIAAgACAgMDA wKyomezp2P/78KCgpICAgP8AAAD/AP//AAAA//8A/wD//////wAAAIAAAACAAICAAAAAgIAA gACAgMDAwKyomezp2P/78KCgpICAgP8AAAD/AP//AAAA//8A/wD//////wAAAIAAAACAAICA AAAAgIAAgACAgMDAwKyomezp2P/78KCgpICAgP8AAAD/AP//AAAA//8A/wD//////wAAAIAA AACAAICAAAAAgIAAgACAgMDAwKyomezp2P/78KCgpICAgP8AAAD/AP//AAAA//8A/wD///// /wAAAIAAAACAAICAAAAAgIAAgACAgMDAwKyomezp2P/78KCgpICAgP8AAAD/AP//AAAA//8A /wD//////wAAAIAAAACAAICAAAAAgIAAgACAgMDAwKyomezp2P/78KCgpICAgP8AAAD/AP// AAAA//8A/wD//////wAAAIAAAACAAICAAAAAgIAAgACAgMDAwKyomezp2P/78KCgpICAgP8A AAD/AP//AAAA//8A/wD//////wAAAIAAAACAAICAAAAAgIAAgACAgMDAwKyomezp2P/78KCg pICAgP8AAAD/AP//AAAA//8A/wD//////wAAAIAAAACAAICAAAAAgIAAgACAgMDAwKyomezp 2P/78KCgpICAgP8AAAD/AP//AAAA//8A/wD//////wAAAIAAAACAAICAAAAAgIAAgP/78KCg pICAgP8AAAD/AP//AAAA//8A/wD//////ywAAAAAawHhAAcI/gABCBxIsKDBgwgTKlzIsKHD hxAjSpxIsaLFixgzamToYIJHCR4ndPwYcuQEkB5NohQZcqXKki1hkkwZk+ZMljdf2jwpk+dO lzVx+hQKNGdQnUQnMEj6s2fRoUijHp1qtCpUqletPt3qtGvTr0zDmgxJtqzZs2jTql3Ltq3b t3Djyp1Lt67du3jz6t3Lt6/fv4ADCx5MuLDhw4gTK17MuLFjtSsjB5V8k/JQy5gna668+XLn zJxDexYNerTp0qg/qya9+nTr1Kxju5YNe+jj27hz697Nu7fv38CDCx9OPK+A4siTDz6uFymB 5xMIeIRu9rn06NfTWo+unTpZ6+Cz/k/3jnYl2rEC0odMr349e+bseyrvCR67dPJ3w4tXu/0t fv/UmXfWWBPER1Z77sH3nlDVXUfdf+NF2J2EDXInnoMOVqjXcRx6ZGCC6oXI3HxrSZAdhnw9 uN9Z0K3In4tuQchWhyMWWKOINn7I4oVsyaghdzuG5KKPPspFY4FrKWijYgcQ5h2MeKnYI5SA FZnWkR4iuKSWNQZZVn/9YWffePuFSSaZ4f04pn0nWonWhwuepaSWJE5ooYpt6tfif3jWB+Z2 Yf55H55o5ikklVdyuaR7i3pYlmQQ7inmpJKuWJ+YUk76ZZuYDoppUOUd2N57XTqa5YgCzidg i4d26mqn/55+d+mesVbq6a0RSuqqrgGWWBacjW55402bermmlGZueiuKmsqq7K5uqqUjnabi WOdarFIIaK0X4uctisj6SWiu3Gr6Z13xKcmooi96WS6l3rbKK7PFCgntmWcN9CaSXZY6orXX ttvqnfia2+zB4ZL77LHLKkzwwSHpKye/OcLJ4b9tPalwpqx+uzGzkXJq68NxHRliluutW6pf Sy1G3siWglvmzA7zSnC5894LcVtYoowjgqU6J+igeupZ3ZoM06psntsWbNuAoir4L8YJykci geZuWzSbhR76pKBoJo2vuBgSzWaaqZZFoI7Cnnqg1QEXtnLcielH915z36333v578cj334AH /tilgjtW2+GvJU6b4rM1jvjikDvO+OOSR0755ZNnbnnhnHfu+eeghy766KSXbjpvSImO9aN3 pV3n6ny5fpbsdnEFllRaeSUWVqfPlXfvj/1+Otk72wVodzHbLSuiJdPpPLWBH7/zuXhZDL2I bPOtcfF0ZVrhfd9JGDPeFDP6q/B3cwyj9+iWn72BpO4N6YlV0m/skFC6SbtPPb/P3P7JMc/L pgSZt4DEZFeaGFkwt7kGmkZDZkNa0ZS2MK8VKlnNGpoFjaQoakFPe8krGAUxyDOgsS1OKUOO AeSSrXvlrGlLqxm9nPWxXdEFWB5EX9xC9qqEMe9No/5CYdtSWLgWfq1hGZRR09RnrDPZ6oeJ 6lCwUMY5Ho5NZlAE4o22GCwdIkdoNOQWp6aDMHm9y4pkHBnShCKxmpgsfqIiVtzGYsUzlu1p E2hjTHpmKp9RbYG6w11WBmm73VmliTCDYKwGpkb2DcyF4IuWWfgIsA+C0F46Qxb3pEWxk7UN aJ87ItGMNivC3clQXEsW4ew2Lt89b1FCFFwpaTVBUzZPauabFvCWRp6W/c2Lu0QMMDtnGf+E T1W+qp38BgNAUO2FgZWLZm3yQ8Jgmq5J1sxm4bCpzW5685vgpJsgCznOQGKFnOc0Z+5ul052 rtOQhFRnPN05T3ii853lpP/nPeuZT3vCLZwADahAB0rQgvplmAZN6K90ExniLUySgHQLSqw3 SRNqqZneXFULqYk8s0G0gCCtmtvOhyBoFpOGQFIkYbAkRGtlTzkYRYwj61Kk7X10Q52kokgP sz01rTSnXbwYkhSaMb85yX6MoeSwGPMgEXr0ibrioL+4iD2ECjRkZTviBVvJSLFtVWs3fGXU rBoXnWQrZ/BKq6RiOlHnVVRqFyWqSfiEMyR2DFfFElnDwhWr/a2NS4D90D73+b3liU9mNQzr H1UWR6KipU9pghb1XlVYbTWyW1l8a2PPp5gBMrGHSDSLHt8mxZUBrI+OrRdlE/vIqKqpqa3U mIz+RpsyKep0oXXT62FluNq3sDRdQv1Zau1ks0xa9lOv3atKb+oolvpxqIGxzMtqCdklPoet I41fEHHJOoVqVKtjAmsqYfgjspFyaNLZn4AoKqwumdSZxCHrcOmmvL7I9y6+nK9+eXrM/fo3 obYMXD8H3E5/6lOeg0Wwgg/MYAM7mMD4LDCEs2KABDd4whZm0H83zOHBBKAv3OywiEdM4hKb 5aR+Ue9fYipQFq84mX15rwOn+Zv7mhg5Nk4LAIjjUMWwd6yb7fDW4CLKzCbJoiTdLn2Rmpjf Pq9fOQYoyOLCV5z+dqzBjXJizAo+vsAuKAjsopza42KAEoi5Kk3Ll2/+olQFWivDGF6whg27 wciKjbn+A3JztRzQ6WZVjOMNr5FHar5JPnfJZqwhV2+JWxDBZ4oi/ppa7bhbNOcoagq8dPr8 7DAJDhrTqOWsukr8LcR+NmGKDXIKT0scyiyyrmlEpW30uBLncpJUxylzODUaPh+C7NeaMg+t awtdSE9tUTKWJuO+lGhfU2qTCSwtcLfEWRNL2tlpnbTvgDrqY1uSx7Q8G1jP+2n4LQh7FbV2 oM4r7gl2TaoiBeVO98vnGwOn3sRJ3V/WjMe86Bqc/CYMv/8N4zhfWML2TrjCF87whjvc4cmO uOaUPePJfZjiGJd4xTee8YlrvOMPD7nIR07/uhDTm+R0w3dxuNxlZUpU0zDfqYEC/haT9w5r zFMlFLELc/9BOaIPRniEDxnGT9ulf1Pdrsql/EOP/cXJVOUuoskozPJNcU63VXdRDxNmwMIS hDP7c9aMfsK5eT0wBcimGOc1LvSmutrPjSVyXH0uZ+sKu9MyO24JDlABZg2SiV2rAQkdak2f 9uMff+xlKVvNEh7b0G9T+Cr3Wte6G73n6f7ZcRqww2abOkOzFci+bOvBRtt7jDCDtbNCv+OJ lXbMn1y6yz6v6EXCBelUjJPcI81IymsbSK71rfumrXlI5zsmEbzzU7eDd6AdQPPAjQ/NFToS rYkr0OO9o3V4bu5p/vecTnAWOj95xxvZo7zq50+/+tfP/mVyHPEej//75Q/y+sN//vifADfv j/H2+///ABiA83V5Atgc8EVifnUY0zdnWwZjsSNnBhd0BVh4A2V+4BZugyE9xoNVoyQcZUd4 2bV7VOZnOYdKlqZZIPh9FshTYyQYM0VkFKJaJ2gYbTZqQ1VVWrZuTdctMdg+V7ZqcAVTyNeC IZFfUWJUczFDKDWDdaFizQVdeQd7RCRHIeVpnxYtTghUWeczVMR/ySaDT3U2Y/duKOU1SmNd 5lVed9Ru5OV2TnN7HfR4cEeBSXg8bWc02feGviVWc2h8yYGHL+R7vcVD1oVcqGaGhfgp/6mn bcG3hxiDZCQVeVGiiHYVSZXYW44IappYbHUiaaDFeId4WIGof3gVin+HVoDna403I550dnPI Z/cxADdTSp5nWZcXhelGh8LxEp44irCFWEsIbIdoitf2LqlIe93lEXpkEm+EQtezWDvBFnTE MAijWxyjKWMxbE/IRbnoXhAofuF3P8C4iKaYbagWVcRojfRCjshYblZHbTf4elOYH5WWIacI a2jWdVwIhS+FHGnIhrACkBg0S2sIij2WhhqEhsqXfPDWWOZGeLAIVUnTge5mZ3A4NerSfd82 gb6xgoXjkbyBYgjogMw0eIZDknrhhfTHkSzZki75kjAZOJxnGP8RWJPg+I1DN345GY462ZM8 +ZM46ZNO0TI2uZNBGZP4hZRKuZQFBZIB6JTA0VB4WITUhD/pZZI/tlN8NzooEWB28nJg+WM+ dypkRn/8d0xN1RdK5I6k93Mb2WeZ1VPk05aqBn1vCW6BsZbbRpdxdJfhdIIEOHr8WJdCNY/X UmQT+Wqi5FSu9HN9CZWyFHaCZn1psorSwodXV5i6CBxgZEb46HuLt4AjgYuauIBuYXN7M1c8 WCm7FZDQIZoQyY2MRURAeXA5iUiYxVqFiIoNmZl+SFAkWIrAtkGNWWjGpkubtoSMCHqgqYQR I3quN5iPOVzglSutKVswQlvbaJwftFT/ydl7y3mM2VYyVhdEQ+RYfUJ1vSiMbCmduSd1nFgc dJeeArl8tBRB4MF9FlWYglVQK9RunhY2gJifWLmfZHmeU6iSHLc3kOl/DcqUEBqhEmpNRSmU tmmhEoihFVqbGcqhGxqUHnqTF/oUE7oWsliiKJqiKrqiLmd/Zvmi+aegLhqjMDqjNiqj0MSi OrqjPNqjhXGiI/ehIwqiRDqkRtqhRYqkRyqkStqkTGqaPhqlUjqlVAoYRhhQOFqjWUqjXHqj WvqlXbqljVOlJnalZHqmaEqlTyqiTsqma2qUS+qmcgqnbUqnb6qhaZqnerqnfOpYYvqnYOql YRqogDqorAEB/4I6pn26qIzaqI4aOkgBAZKKqI8hqWkxqYiKqZq6qZTKqZ76qZhqFpvqEZNK qpZqqqE6AaOqqpoaEqd6pyFqp3OKp7Jaq2dxqqdqF5RKF7l6q7vaqb/KqqY6rMJKqsWaq5kK rKKqrMWqqmWBq8wKrcTaq+GEmoDTq9QqF7v6F8hKrK4arcz6rd7qrdQqrc26rccKrtMarmiK rcmarKxaqt/6ru+KqpYqr/OKqstqrML6q+rar+IKsOSKruYqsGRhrgj7rwaVdncjGe46rNLq r87ar/BKsRUrrve6r/6KrPiarhxrrwHbrPa6rRn7rKkarxzbsZRaqInKsi7bGSZ7sP/KWrD6 CrEVC60da7G+OrEGe68S27MzG7Llyq7Zmq7rerT8mqYPS7HjWrM+a7QiK7M1G7Mha7MBO7RN +7FSK7JFm7BIW7RKG65PG7U3C69ey7MQG7Xj2q1ni7XnCrVbu7RU27YKK6WRmrOfKrMbG68g y7d6e7JUi7KcKrirSrigiq6E+7cmm6qrWrivOquxSquSG7mUK0/BhLiPmrma+38RsLls8bKG 2rKEOrqhC7qiW7oH6Lmqu7qs27oKCLlJCquxC7txaquVW7uTO7u2a7mu27u++7vAGxfFtLc5 qxhgaxgbW6qjWrh9i7KGm7eLK6/Sm7L0Or2Z+qxbi7rae7r/0bSzV4u4mOsX7JoYSzu25vuz WjuxbDu+UNut2fuvcqu2DFe+4FsY4Uu+JDuz+ou0/Du+6fu1wfq+/Zu98qtwF0uzeWu9KTu1 ytu4OLvAejuyfou9Wnu+7Zu/V5u2Azu3Eou5uLqu9fu/JqYTB+y/+lu2TGu2Znu0Fvy0GByx Y3uw58q4NBy/H5u8QkuwgFuyMfuzzuuqDICtZCG7uHu7deqrFazDawvDE8y39Mu0Kdy1CVu8 J+u2GOvDM8yzPCzCCBy+W6zDOOyqimGmpYO+JkyuRouzxhrDaYzCaizDZyuq3xu4VrvEBGzF bhu/dPzB01q1IWfGWauuTKzCKczC/258vQ/bttjLv4G8wWSLwWvMvl18qZCMsHOccJHRwKD6 twocqo7rycmryfrKvCNbw4v7vPOKw/gKuAN7uMu6w8XbyoisxqAMdKZ7yxMXvLq8y7zsu0R8 xEb8y8JMu8Csu7lbxMbcy8q8zMzcp7i8vc/MvdE8zaRbf818zdiczTw6zLuLzN5czN/MzccM zuRcoTraetqczur8u9QMzdXczieBTfA8z9W8zvZ8z/gMgPoGgMFMzOLcz92cofk80ARd0A2X yZ4qvrFsv63KyZw8uNGb0Kl8uCv7zhbtzhhto688tXux0IKhskNbrhFMyfkr0vnqxwBIxoix ysfLqy3Nrf/ZCtImzdEbncqLPLVLcb+LytI6PRceDRhgK8QqO9JoMdRDfdKd2qgkvMCg7LNO bdOjHNLuer1QjcRF7b6rTNRWLcYTXNJJG9D/vGAHENbhPKs1zdNO28AA/NQzrLA0q9VEDax8 TNOnzNWMG8Ev3U0Mu0sQndZyLcbT69eC7bd/3cQnXdNarLxwXddJ68kP3boLbb00TcVvLNk/ PNiMzdhe7dUkLcP5utk9naaUEdmVHdJnLdVhjMqIrdnRu9jqK8SKi9TJSM8ZTdvWnNkjbdmH jdRMPdWFvRZBTbKrTdkcDb5T3dieS9qFjbcxXdrLjdlou9hHvcfNXdzeS9ehraeDyv3DlJ3U hE3Lgd3WXz3cM33HeAzb1K3Ei6oSfY3XEh3brWrKTmzYrHzVrNzQnk3Rz1vfci3RAD3OZF3O /ix+rJvdBt2jKn03FL3gDN7gDv7gEB7hEt7gi4rQE37hGJ7hGr7hDm7bHn7RGn3gIo7gI66i AX7iAw7WKQ7gK/7fLv6NAQEAOw== - ------=_NextPart_000_000E_01C6995D.3200F690-- - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Tue, 27 Jun 2006 13:36:13 -0700 From: "Syed Huq \(shuq\)" Subject: [IBIS-Users] Third call for Papers - IBIS Summit at DAC 2006 - ----------------------------------------------------------------------- IBIS SUMMIT THIRD CALL FOR PARTICIPATION & PRESENTATIONS - ----------------------------------------------------------------------- I B I S S U M M I T M E E T I N G Time/Date: Tuesday July 25, 2006, 8:00 AM to 5:00 PM Location: Argent Hotel (near Moscone Center) 50 Third Street San Francisco, CA 94103 Room: The City Room Content: Presentations and Discussions Purpose: Solicit and Exchange IBIS Model Related Information and Ideas Sponsors: IBIS Open Forum, Mentor Graphics If your company would be interested in sponsoring this event, please contact Syed Huq . Sponsorship is available for the room, lunch, and coffee breaks. DAC: July 24 - 28, 2006 Moscone Center San Francisco, California FREE Exhibit Pass is available on Monday only. See for more information. BACKGROUND The Design Automation Conference (DAC) is the premier Electronic Design Automation (EDA) and silicon solution event. DAC features over 50 technical sessions covering the latest in design methodologies and EDA tool developments in addition to an exhibit floor, with combined booth and demo suites, showcasing over 200 of the leading EDA, silicon and IP providers. Topics of current interest to the EIA IBIS Open Forum are addressed at DAC. This meeting will be conducted as a formal IBIS Summit Meeting. Presentations are expected to be available and archived in an electronic format, and minutes of the meeting will be issued. Any pending formal decisions (votes) will be announced at least two weeks prior to the meeting. ELECTION OF OFFICERS The annual election of officers will be held. Nominations can be sent to Syed Huq or made at the meeting for these positions: Chair, Vice Chair, Secretary, Librarian, Webmaster, and Postmaster CALL FOR PARTICIPANTS People involved in IBIS Model development, EDA tool development, and digital circuit design are invited to participate to the Summit meeting. If you plan to participate, please register with the information below: Name: E-mail address: Company: Telephone: Send to: Syed Huq (shuq@cisco.com) CALL FOR PRESENTATIONS We are seeking presentations from individuals who have IBIS experiences or issues. Format of Presentation: LCD Projection with Windows laptop. Time: 15-30 Minutes Electronic Archival: We request electronic versions so that the presentations can be archived and also made available to non-attendees. Formats can be Power Point and/or Acrobat. Electronic presentations should be made available by July 20, 2006 for uploading and copying to the presentation laptop. If you plan a presentation, please supply Title: Presenter: E-mail address: Company: Telephone: Estimate Time: Send this to: Syed Huq (shuq@cisco.com) AGENDA The agenda includes presentations, discussions, breaks, and a luncheon (which will be provided). This will be developed as presentation proposals are received. The following presentations or topics are tentatively planned (titles not finalized): Michael Mirmak, Intel, "IBIS Roadmap" Bob Ross, "IBIS Summary and Evolution" John Shields, Mentor Graphics, "A Standards-based Approach to IP Protection for HDLs" Richard Ward, Texas Instruments, "Serdes Introduction and Macro/AMS Modeling" Arpad Muranyi, Intel, "Macromodeling Committee Activities" Ian Dodd, Mentor Graphics, "Integration Issues in using IBIS Multi-lingual Models" Arpad Muranyi, Intel, "Quite Line Experiments and BIRD97/BIRD98" Possibly Frequency Dependent Modeling Topic Possibly Power Delivery Topic Possibly other topics Election of IBIS Officers LIST OF NEARBY HOTELS See for travel directions, hotels and other information. - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Wed, 28 Jun 2006 23:54:43 -0700 (PDT) From: bhavneet aujla Subject: [IBIS-Users] Calculation of C_comp - --0-1471163431-1151564083=:46826 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Hello, I am trying to calculate C-comp using LC oscillator method for output pad. For that i am disabling both NMOS and PMOS from the core side and then doing AC Analysis taking (for supply of 5v) dc 2.5 ac 2.5 so i can't understand that 1. the capacitance that i am calculating using the approach, isn't it that for a signal applied some capacitances are charged up and some are discharged. so how can we say that we have approximate value of capacitance i.e. C_comp. 2. i should try to obtain capacitance also by enabling either PMOS or NMOS too. Thanking you Regards Bhavneet singh - --------------------------------- Sneak preview the all-new Yahoo.com. It's not radically different. Just radically better. - --0-1471163431-1151564083=:46826 Content-Type: text/html; charset=iso-8859-1 Content-Transfer-Encoding: 8bit
Hello,
 
I am trying to calculate C-comp using LC oscillator method for output pad. For that i am disabling both NMOS and PMOS from the core side and then doing AC Analysis taking (for supply of 5v)
dc 2.5 ac 2.5 
so i can't understand that
1.   the capacitance that i am calculating using the approach, isn't it that for a signal applied some capacitances are charged up and some are discharged. so how can we say that we have approximate value of capacitance i.e. C_comp.
2.   i should try to obtain capacitance also by enabling either PMOS or NMOS too.
 
Thanking you
 
Regards
Bhavneet singh

Sneak preview the all-new Yahoo.com. It's not radically different. Just radically better. - --0-1471163431-1151564083=:46826-- - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Sat, 1 Jul 2006 19:23:53 -0700 From: "Mirmak, Michael" Subject: [IBIS-Users] IBIS 4.2 Golden Parser Released! The IBIS Open Forum is pleased to announce the availability of Golden Parser executables and source code for IBIS 4.2. This latest version of the specification was approved on June 2, 2006 and includes support for VHDL-AMS and Verilog-AMS code that uses only analog ports, in addition to the mixed analog and digital ports available under IBIS 4.1. The latest specification can be found at: http://www.eda-stds.org/ibis/ver4.2/ The executables can be found at: http://www.eda-stds.org/ibis/ibischk4/ Versions are available for DOS32 (Microsoft Windows), HP 11, Linux and Sun 5.6 operating systems. Source code licensees will receive their source code updates shortly. The Open Forum is grateful to Jon Powell of Intel Corp. for providing development services, making this release possible. Thank you for your support of IBIS! - - Michael Mirmak Intel Corp. Chair, EIA IBIS Open Forum - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Tue, 11 Jul 2006 17:20:52 -0700 From: "Syed Huq \(shuq\)" Subject: [IBIS-Users] Fourth and Final Call for Papers & Participations - IBIS summit at DAC 2006 - ----------------------------------------------------------------------- IBIS SUMMIT FORTH AND FINAL CALL FOR PARTICIPATION & PRESENTATIONS - ----------------------------------------------------------------------- I B I S S U M M I T M E E T I N G Time/Date: Tuesday July 25, 2006, 8:00 AM to 5:00 PM Location: Argent Hotel (near Moscone Center) 50 Third Street San Francisco, CA 94103 Room: The City Room Content: Presentations and Discussions Purpose: Solicit and Exchange IBIS Model Related Information and Ideas Sponsors: IBIS Open Forum, Mentor Graphics If your company would be interested in sponsoring this event, please contact Syed Huq . Sponsorship is available for the room, lunch, and coffee breaks. DAC: July 24 - 28, 2006 Moscone Center San Francisco, California FREE Exhibit Pass is available on Monday only. See for more information. BACKGROUND The Design Automation Conference (DAC) is the premier Electronic Design Automation (EDA) and silicon solution event. DAC features over 50 technical sessions covering the latest in design methodologies and EDA tool developments in addition to an exhibit floor, with combined booth and demo suites, showcasing over 200 of the leading EDA, silicon and IP providers. Topics of current interest to the EIA IBIS Open Forum are addressed at DAC. This meeting will be conducted as a formal IBIS Summit Meeting. Presentations are expected to be available and archived in an electronic format, and minutes of the meeting will be issued. Any pending formal decisions (votes) will be announced at least two weeks prior to the meeting. ELECTION OF OFFICERS The annual election of officers will be held. Nominations can be sent to Syed Huq or made at the meeting for these positions: Chair, Vice Chair, Secretary, Librarian, Webmaster, and Postmaster CALL FOR PARTICIPANTS People involved in IBIS Model development, EDA tool development, and digital circuit design are invited to participate to the Summit meeting. If you plan to participate, please register with the information below: Name: E-mail address: Company: Telephone: Send to: Syed Huq (shuq@cisco.com) CALL FOR PRESENTATIONS We are seeking presentations from individuals who have IBIS experiences or issues. Format of Presentation: LCD Projection with Windows laptop. Time: 15-30 Minutes Electronic Archival: We request electronic versions so that the presentations can be archived and also made available to non-attendees. Formats can be Power Point and/or Acrobat. Electronic presentations should be made available by July 20, 2006 for uploading and copying to the presentation laptop. If you plan a presentation, please supply Title: Presenter: E-mail address: Company: Telephone: Estimate Time: Send this to: Syed Huq (shuq@cisco.com) AGENDA The agenda includes presentations, discussions, breaks, and a luncheon (which will be provided). This will be developed as presentation proposals are received. The following presentations or topics are tentatively planned (titles not all finalized): Michael Mirmak, Intel Corp., "IBIS Roadmap" Bob Ross, Teraspeed Consulting Group, "IBIS Summary and Evolution" John Shields, Mentor Graphics, "A Standards-based Approach to IP Protection for HDLs" Richard Ward, Texas Instruments, "Serdes Introduction and Macro/AMS Modeling" Arpad Muranyi, Intel Corp., "Macromodeling Committee Activities" Gary Pratt, Mentor Graphics, "DDR2 Electrical and Timing Measurements in VHDL-AMS" Ian Dodd, Mentor Graphics, "Integration Issues in using IBIS Multi-lingual Models" Arpad Muranyi, Intel Corp., "Gate Modulation Effect and BIRD97/BIRD98" Michael Mirmak, Intel Corp., "IBIS in the Frequency Domain" Mike LaBonte, Cisco Systems, "IBIS Quality Designations" Possibly other topics Election of IBIS Officers LIST OF NEARBY HOTELS See for travel directions, hotels and other information. - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Fri, 14 Jul 2006 11:52:19 -0400 From: "Dwayne Johnson" Subject: [IBIS-Users] Using S2IBIS3 to generate ramp data This is a multi-part message in MIME format. - ------=_NextPart_000_00F9_01C6A73B.F70EA900 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hi. I'm starting to generate IBIS models using S2IBIS3 but I have a concern with the ramp data (dV/dt) that is calculated. The typ, min, and max spice files that are generated for this simulation includes the typical spice models for all 3 cases. So, although the input ramp time, temp and supply voltages are being varied for the dV/dt typ, min, max simulations, the spice models are not!!! I've looked at the source code in s2ispice.java and have confirmed that the min, max, and typ routines all specify typical models while varying temp, voltages, and input ramp times. I've looked in the spec but can't find anything to explain this. Shouldn't the spice models be varied for DV/dt ramp measurement, as they are in the rising/falling waveform case? Please advise. Dwayne Johnson Gennum Corporation 905-632-2999x2640 - ------=_NextPart_000_00F9_01C6A73B.F70EA900 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable
Hi.
 
I'm = starting to=20 generate IBIS models using S2IBIS3 but I have a concern with the ramp = data=20 (dV/dt) that is calculated.
The = typ, min, and=20 max spice files that are generated for this simulation includes the = typical=20 spice models for all 3 cases.
 
So, = although the=20 input ramp time, temp and supply voltages are being varied for the = dV/dt=20 typ, min, max simulations, the spice models are = not!!!
 
I've = looked at the=20 source code in s2ispice.java and have confirmed that the min, max, and = typ=20 routines all specify typical models while varying temp, voltages, = and input=20 ramp times.
 
I've = looked in the=20 spec but can't find anything to explain this.  Shouldn't the spice = models=20 be varied for DV/dt ramp measurement, as they are in the rising/falling = waveform=20 case?
 
Please = advise.
 
Dwayne = Johnson
Gennum = Corporation
905-632-2999x2640
- ------=_NextPart_000_00F9_01C6A73B.F70EA900-- - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Fri, 14 Jul 2006 12:08:00 -0400 From: "Ambrish Varma" Subject: FW: [IBIS-Users] Using S2IBIS3 to generate ramp data This is a multi-part message in MIME format. - ------=_NextPart_000_0039_01C6A73E.26992720 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Glad to hear that. Also - there is a new FAQ page for S2IBIS3 that you and other users might find useful. It is available here: http://www.ece.ncsu.edu/erl/ibis/faq/S2IBIS3_FAQ.htm Thanks, - --Ambrish Varma North Carolina State University ph(919)513-2015, fax(919)515-2285 _____ From: Dwayne Johnson [mailto:dwayne_j@gennum.com] Sent: Friday, July 14, 2006 12:03 PM To: 'Ambrish Varma' Subject: RE: [IBIS-Users] Using S2IBIS3 to generate ramp data You've already solved my problem!! I was using 1.0 and because of your reply, I now see that 1.1 is available and will fix this problem. Thank you very much!! _____ From: Ambrish Varma [mailto:akvarma@ncsu.edu] Sent: Friday, July 14, 2006 11:58 AM To: 'Dwayne Johnson' Subject: RE: [IBIS-Users] Using S2IBIS3 to generate ramp data Hello Dwayne, Which version of s2ibis3 are you using? Thanks, - --Ambrish Varma North Carolina State University ph(919)513-2015, fax(919)515-2285 _____ From: owner-ibis-users@eda-stds.org [mailto:owner-ibis-users@eda-stds.org] On Behalf Of Dwayne Johnson Sent: Friday, July 14, 2006 11:52 AM To: ibis-users@eda-stds.org; ibis@eda-stds.ord Subject: [IBIS-Users] Using S2IBIS3 to generate ramp data Hi. I'm starting to generate IBIS models using S2IBIS3 but I have a concern with the ramp data (dV/dt) that is calculated. The typ, min, and max spice files that are generated for this simulation includes the typical spice models for all 3 cases. So, although the input ramp time, temp and supply voltages are being varied for the dV/dt typ, min, max simulations, the spice models are not!!! I've looked at the source code in s2ispice.java and have confirmed that the min, max, and typ routines all specify typical models while varying temp, voltages, and input ramp times. I've looked in the spec but can't find anything to explain this. Shouldn't the spice models be varied for DV/dt ramp measurement, as they are in the rising/falling waveform case? Please advise. Dwayne Johnson Gennum Corporation 905-632-2999x2640 - ------=_NextPart_000_0039_01C6A73E.26992720 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

Glad to hear = that.

Also – there is a new FAQ = page for S2IBIS3 that you and other users might find = useful.

It is available here: http://www.= ece.ncsu.edu/erl/ibis/faq/S2IBIS3_FAQ.htm

Thanks,

=

 

--Ambrish = Varma

North = Carolina State<= font color=3Dnavy> University

ph(919)513-2015, fax(919)515-2285

From: = Dwayne Johnson [mailto:dwayne_j@gennum.com]
Sent: Friday, July 14, = 2006 12:03 PM
To: 'Ambrish Varma'
Subject: RE: [IBIS-Users] = Using S2IBIS3 to generate ramp data

 

You've already solved my = problem!!

I was using 1.0 and because of your = reply, I now see that 1.1 is available and will fix this = problem.

 

Thank you very = much!!

 

From: Ambrish Varma [mailto:akvarma@ncsu.edu]
Sent: Friday, July 14, = 2006 11:58 AM
To: 'Dwayne Johnson'
Subject: RE: [IBIS-Users] = Using S2IBIS3 to generate ramp data

Hello = Dwayne,

Which version of s2ibis3 are you = using?

Thanks,

=

 

--Ambrish = Varma

North Carolina = State University

ph(919)513-2015, fax(919)515-2285

From: owner-ibis-users@eda-stds.org [mailto:owner-ibis-users@eda-stds.org] = On Behalf Of Dwayne Johnson
Sent: Friday, July 14, = 2006 11:52 AM
To: = ibis-users@eda-stds.org; ibis@eda-stds.ord
Subject: [IBIS-Users] = Using S2IBIS3 to generate ramp data

 

Hi.

 

I'm starting to generate IBIS models using S2IBIS3 = but I have a concern with the ramp data (dV/dt) that is = calculated.

The typ, min, and max spice files that are generated = for this simulation includes the typical spice models for all 3 = cases.

 

So, although the input ramp time, temp and = supply voltages are being varied for the dV/dt typ, min, max simulations, the = spice models are not!!!

 

I've looked at the source code in s2ispice.java and = have confirmed that the min, max, and typ routines all specify typical models while varying temp, voltages, and input ramp = times.

 

I've looked in the spec but can't find anything to = explain this.  Shouldn't the spice models be varied for DV/dt ramp = measurement, as they are in the rising/falling waveform = case?

 

Please advise.

 

Dwayne Johnson

Gennum Corporation

905-632-2999x2640

- ------=_NextPart_000_0039_01C6A73E.26992720-- - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Mon, 17 Jul 2006 14:52:58 +0530 From: "Ummalaneni, Venu Babu \(Venu\)" Subject: [IBIS-Users] Test case to see the sensitivity of split C_comp values Hi Gurus, Could some one suggest me a test case which can be useful for observing the sensitivity of split C_comp values of IBIS? Need for the test case: I am extracting the split C_comp values of the IO buffer from two different approaches. I need to select one of the approach by correlating with hspice model. For that, I need a test case that is very sensitive to split C_comp values. Thanks in advance. Best Regards, Venu sensitivity - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Mon, 17 Jul 2006 10:16:20 -0400 From: "Pratt, Gary" Subject: [IBIS-Users] IBIS-4.1/AMS tutorial at DesignCon This is a multi-part message in MIME format. - ------_=_NextPart_001_01C6A9AB.93EE286B Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Greeting SI Enthusiasts, I'd like to get a feeling for the level of interest in another installment of the IBIS-4.1/AMS tutorial at DesignCon 2007. Did everyone who was interested get a chance to attend the tutorial at DesignCon 2006, or is there interest in another session in 2007? =20 For those unfamiliar with IBIS-4.1/AMS, this is the technique the IBIS committee has chosen to move forward with new technologies. IBIS4.1/AMS is a complete modeling language that accommodates additional features and functions of new I/O technology without the need to modify the IBIS specification or wait for EDA vendors to support the modifications. IBIS-4.1/AMS is proving useful for a wide variety of applications including SERDES modeling, SSN, automated eye measurements, receive-side equalization, slew-dependant timing, receiver clock recovery, functional SI verification, multi-level signaling, etc. The 2006 tutorial can be read at >. The 2007 version will include sections on using IBIS-4.1/AMS for performing electrical and timing verification of DDR2 memory, and other interesting applications that have come up over the year. =20 Please let me know if you are interested (preferably via private response, to reduce list clutter). And/or, if you attended 2006, let me know if there is anything you would like to see different in 2007. =20 Thanks in advance, Gary Pratt =20 Gary L. Pratt, P.E. Product Manager - High-Speed Design Kits SDD Division Office: (503) 685-1177 Mobile: dial '0' at Voicemail, or mobile: (262) 337-2196 Email: gary_pratt@mentor.com - ------_=_NextPart_001_01C6A9AB.93EE286B Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable IBIS-4.1/AMS tutorial at DesignCon

Greeting SI Enthusiasts,

I'd like to get a feeling for the level = of interest in another installment of the IBIS-4.1/AMS tutorial at = DesignCon 2007.  Did everyone who was interested get a chance to = attend the tutorial at DesignCon 2006, or is there interest in another = session in 2007? 

For those unfamiliar with IBIS-4.1/AMS, = this is the technique the IBIS committee has chosen to move forward with = new technologies.  IBIS4.1/AMS is a complete modeling language that = accommodates additional features and functions of new I/O technology = without the need to modify the IBIS specification or wait for EDA = vendors to support the modifications.  IBIS-4.1/AMS is proving = useful for a wide variety of applications including SERDES modeling, = SSN, automated eye measurements, receive-side equalization, = slew-dependant timing, receiver clock recovery, functional SI = verification, multi-level signaling, etc.

The 2006 tutorial can be read at = <http://si-list.org/files/mentor_designcon_2006/HYPERLINK = "http://si-list.org/files/mentor_designcon_2006/AMS%20Tutorial%20.pd= f"AMS Tutorial .pdf>.  The 2007 version = will include sections on using IBIS-4.1/AMS for performing electrical = and timing verification of DDR2 memory, and other interesting = applications that have come up over the year.  

Please let me know if you are = interested (preferably via private response, to reduce list = clutter).  And/or, if you attended 2006, let me know if there is = anything you would like to see different in 2007. 

Thanks in advance,
Gary Pratt =20


Gary L. Pratt, P.E.
Product Manager - High-Speed Design = Kits
SDD Division
Office: (503) 685-1177
Mobile: dial '0' at Voicemail, = or
mobile: (262) 337-2196
Email: gary_pratt@mentor.com




- ------_=_NextPart_001_01C6A9AB.93EE286B-- - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Mon, 17 Jul 2006 08:50:54 -0700 From: "Ray Anderson" Subject: RE: [IBIS-Users] IBIS-4.1/AMS tutorial at DesignCon This is a multi-part message in MIME format. - ------_=_NextPart_001_01C6A9B8.C97BA5B7 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Gary Pratt wrote: >The 2006 tutorial can be read at list.org/files/mentor_designcon_2006/AMS%20Tutorial%20.pdf"A MS Tutorial .pdf >. The 2007 version will include sections on using IBIS-4.1/AMS for >performing electrical and timing verification of DDR2 memory, and other interesting applications that have come up over the year. =20 =20 =20 The URL referenced in Gary's recent posting seems to have been mangled by his e-mail software. The correct URL is: http://si-list.org/files/mentor_designcon_2006/AMS%20Tutorial%20.pdf - -Ray =20 Raymond Anderson Senior Signal Integrity Staff Engineer Product Technology Department Advanced Package R&D Xilinx Inc. (si-list administrator) =20 - ------_=_NextPart_001_01C6A9B8.C97BA5B7 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable IBIS-4.1/AMS tutorial at DesignCon

Gary Pratt wrote:

>The 2006 tutorial can be = read at <http://si-list.org/files/mentor_designcon_2006/HYPERL= INK "http://si->list.org/files/mentor_designcon_2006/AMS%20Tutorial%2= 0.pdf"AMS Tutorial .pdf>.  The 2007 version = will include sections on using IBIS-4.1/AMS for >performing electrical and timing verification of DDR2 memory, and other interesting applications that = have come up over the year.  

 

 

The URL referenced in Gary’s recent posting seems to have been mangled by his e-mail = software.

The correct URL is:  http://si-list.org/files/mentor_designcon_2006/AMS%20Tutorial%20.pdf=

-Ray

 

Raymond = Anderson

Senior Signal Integrity Staff Engineer

Product = Technology Department

Advanced = Package R&D

Xilinx = Inc.

(si-list administrator)

 

- ------_=_NextPart_001_01C6A9B8.C97BA5B7-- - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Mon, 17 Jul 2006 13:22:12 -0500 From: "Sam Chitwood" Subject: RE: [IBIS-Users] Test case to see the sensitivity of split C_comp values Hi Venu, Basically you need a non-ideal power delivery model in order to see the effects of split c_comp. I recommend that you use a fully coupled (and frequency dependent would be even better) sig/pwr/gnd package+PCB model that has ports at the driver, receiver, and power supply locations. There has been a lot of exploration work regarding how to split c_comp over the past 1.5 years. Zhiping Yang has published a few documents about his techniques - it's a good place to start if you haven't seen them yet. I believe this was his latest paper: http://www.vhdl.org/pub/ibis/summits/dec05/yang.pdf Just let me know if you have any other questions. Thanks, Sam - -----Original Message----- From: owner-ibis-users@server.eda-stds.org [mailto:owner-ibis-users@server.eda-stds.org] On Behalf Of Ummalaneni, Venu Babu (Venu) Sent: Monday, July 17, 2006 4:23 AM To: ibis-users@server.eda-stds.org Subject: [IBIS-Users] Test case to see the sensitivity of split C_comp values Hi Gurus, Could some one suggest me a test case which can be useful for observing the sensitivity of split C_comp values of IBIS? Need for the test case: I am extracting the split C_comp values of the IO buffer from two different approaches. I need to select one of the approach by correlating with hspice model. For that, I need a test case that is very sensitive to split C_comp values. Thanks in advance. Best Regards, Venu sensitivity - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Tue, 18 Jul 2006 12:29:52 +0900 From: "Xuefeng Chen" Subject: RE: [IBIS-Users] IBIS 4.2 Golden Parser Released! Hi expert, Can you tell me how to unzip the file of source code? I failed by winzip and some linux commands. I even tried to rename the file with 'ibischk.zip' but still failed. Thanks a lot! Best regards Xuefeng - -----Original Message----- From: owner-ibis-users@eda-stds.org [mailto:owner-ibis-users@eda-stds.org] On Behalf Of Mirmak, Michael Sent: 2006Äê7ÔÂ2ÈÕ 10:24 To: ibis-users@eda-stds.org Subject: [IBIS-Users] IBIS 4.2 Golden Parser Released! The IBIS Open Forum is pleased to announce the availability of Golden Parser executables and source code for IBIS 4.2. This latest version of the specification was approved on June 2, 2006 and includes support for VHDL-AMS and Verilog-AMS code that uses only analog ports, in addition to the mixed analog and digital ports available under IBIS 4.1. The latest specification can be found at: http://www.eda-stds.org/ibis/ver4.2/ The executables can be found at: http://www.eda-stds.org/ibis/ibischk4/ Versions are available for DOS32 (Microsoft Windows), HP 11, Linux and Sun 5.6 operating systems. Source code licensees will receive their source code updates shortly. The Open Forum is grateful to Jon Powell of Intel Corp. for providing development services, making this release possible. Thank you for your support of IBIS! - - Michael Mirmak Intel Corp. Chair, EIA IBIS Open Forum - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Tue, 18 Jul 2006 07:43:22 +0200 From: Lars Snith Subject: Re: [IBIS-Users] IBIS 4.2 Golden Parser Released! Hello, I take it you refer to the file: http://www.eda-stds.org/ibis/ibischk4/linux/ibischk4.gz Use "gzip -d ibischk4.gz" Best regards, Lars Xuefeng Chen wrote: > Hi expert, > Can you tell me how to unzip the file of source code? > I failed by winzip and some linux commands. > I even tried to rename the file with 'ibischk.zip' but still failed. > Thanks a lot! - -- Those who can, Do Those who can't, Simulate - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Tue, 18 Jul 2006 17:13:49 +0900 From: "Xuefeng Chen" Subject: RE: [IBIS-Users] IBIS 4.2 Golden Parser Released! Hi Lars, Thanks for your input, but I still failed with the message: gzip: ibischk4.gz: not in gzip format Best regards Xuefeng - -----Original Message----- From: Lars Snith [mailto:lsnith@atmel.com] Sent: 2006Äê7ÔÂ18ÈÕ 13:43 To: Xuefeng Chen Cc: Mirmak, Michael; ibis-users@eda-stds.org Subject: Re: [IBIS-Users] IBIS 4.2 Golden Parser Released! Hello, I take it you refer to the file: http://www.eda-stds.org/ibis/ibischk4/linux/ibischk4.gz Use "gzip -d ibischk4.gz" Best regards, Lars Xuefeng Chen wrote: > Hi expert, > Can you tell me how to unzip the file of source code? > I failed by winzip and some linux commands. > I even tried to rename the file with 'ibischk.zip' but still failed. > Thanks a lot! - -- Those who can, Do Those who can't, Simulate - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Tue, 18 Jul 2006 09:20:52 -0400 From: "Dwayne Johnson" Subject: RE: [IBIS-Users] IBIS 4.2 Golden Parser Released! I had the same problem. After being unable to unzip, I just tried running it as is and it works!! The .gz extension is misleading. You run it in linux by typing "ibischk4.gz" at the prompt. Make sure it has the executable attribute on it ("chmod u+x ibischk4.gz" if required). Dwayne Johnson Gennum Corporation - -----Original Message----- From: owner-ibis-users@eda-stds.org [mailto:owner-ibis-users@eda-stds.org] On Behalf Of Xuefeng Chen Sent: Tuesday, July 18, 2006 4:14 AM To: Lars Snith; Xuefeng Chen Cc: Mirmak, Michael; ibis-users@eda-stds.org Subject: RE: [IBIS-Users] IBIS 4.2 Golden Parser Released! Hi Lars, Thanks for your input, but I still failed with the message: gzip: ibischk4.gz: not in gzip format Best regards Xuefeng - -----Original Message----- From: Lars Snith [mailto:lsnith@atmel.com] Sent: 2006å¹´7月18æ—¥ 13:43 To: Xuefeng Chen Cc: Mirmak, Michael; ibis-users@eda-stds.org Subject: Re: [IBIS-Users] IBIS 4.2 Golden Parser Released! Hello, I take it you refer to the file: http://www.eda-stds.org/ibis/ibischk4/linux/ibischk4.gz Use "gzip -d ibischk4.gz" Best regards, Lars Xuefeng Chen wrote: > Hi expert, > Can you tell me how to unzip the file of source code? > I failed by winzip and some linux commands. > I even tried to rename the file with 'ibischk.zip' but still failed. > Thanks a lot! - -- Those who can, Do Those who can't, Simulate - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Tue, 18 Jul 2006 09:22:01 -0700 From: "Mirmak, Michael" Subject: [IBIS-Users] Downloading IBIS 4.2 Parser Executables Several individuals have reported problems running the ibischk4 parser executables they have downloaded from the IBIS website. We can confirm that the posted files are properly archived using zip or gzip and carry .zip or .gz extensions. Some browsers may be automatically unzipping the files without changing the file extension. If you are having difficulty, please check your browser's settings to ensure that automatic unzipping is not taking place. - - Michael Mirmak Intel Corp. Chair, EIA IBIS Open Forum http://www.eda-stds.org/ibis/ http://www.eigroup.org/ibis/ - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Tue, 18 Jul 2006 12:02:31 -0700 From: "Syed Huq \(shuq\)" Subject: [IBIS-Users] Agenda: IBIS Summit at DAC 2006 - ------------------------------------------------------------------ AGENDA, IBIS SUMMIT MEETING July 25, 2005 Argent Hotel 50 Third Street San Francisco, CA 94103 The City Room (check signs at site) Co-sponsors: IBIS Open Forum, Mentor Graphics - ------------------------------------------------------------------ 8:00 AM Refreshments & Sign In 8:30 AM Introductions - Welcome to Summit - Introductions - Opens for Issues, Discussion Topics 8:45 AM IBIS Roadmap Michael Mirmak, Intel Corporation 9:00 PM IBIS Quality Designations Mike LaBonte, Cisco Systems 9:15 AM Macromodeling Committee Activities Arpad Muranyi, Intel Corporation 9:45 AM A Standards-based Approach to IP Protection for HDLS John Shields, Mentor Graphics 10:30 AM BREAK 10:45 AM Serdes Introduction and Macro/AMS Modelling Richard Ward, Texas Instruments 11:15 AM Algorithm Modeling Approach for Serdes Devices Lance Wang, Cadence Design, and Joe Abler, IBM 11:45 AM Election of Officers 12:00 PM LUNCH - Pre-registration required 1:00 PM Spice2Ibis - Status and Planned Improvements Paul Franzon, North Carolina State University 1:30 PM Buffers for Advanced SPICE to IBIS Testing Bob Ross, Teraspeed Consulting Group 2:00 PM IBIS in the Frequency Domain Michael Mirmak, Intel Corporation 2:30 PM Gate Modulation Effect and BIRD97/98 Arpad Muranyi, Intel Corporation 3:00 PM BREAK 3:15 PM DDR2 Electrical and Timing Measurements in VHDL-AMS Gary Pratt, Mentor Graphics 3:45 PM Integration Issues in using IBIS Multi-lingual Models Ian Dodd, Mentor Graphics 4:00 PM IBIS Summary and Evolution Bob Ross, Teraspeed Consulting Group 4:30 PM Opens/Discussion 4:55 PM Concluding Items - Next Open Forum Meeting: August 4, 2006 5:00 PM End of IBIS Summit Meeting - ------------------------------------------------------------------------ REGISTRATION People involved in IBIS Model development, EDA tool development, and digital circuit design are invited to participate to the Summit meeting. If you plan to participate, please register with the information below: Name: E-mail address: Company: Telephone: Please send registrations to shuq@cisco.com. - ------------------------------------------------------------------------ - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Wed, 19 Jul 2006 10:41:32 +0900 From: "Xuefeng Chen" Subject: RE: [IBIS-Users] IBIS 4.2 Golden Parser Released! Hi all, Thanks a lot! It works now. Best regards Xuefeng - -----Original Message----- From: Dwayne Johnson [mailto:dwayne_j@gennum.com] Sent: 2006Äê7ÔÂ18ÈÕ 21:21 To: 'Xuefeng Chen'; 'Lars Snith' Cc: 'Mirmak, Michael'; ibis-users@eda-stds.org Subject: RE: [IBIS-Users] IBIS 4.2 Golden Parser Released! I had the same problem. After being unable to unzip, I just tried running it as is and it works!! The .gz extension is misleading. You run it in linux by typing "ibischk4.gz" at the prompt. Make sure it has the executable attribute on it ("chmod u+x ibischk4.gz" if required). Dwayne Johnson Gennum Corporation - -----Original Message----- From: owner-ibis-users@eda-stds.org [mailto:owner-ibis-users@eda-stds.org] On Behalf Of Xuefeng Chen Sent: Tuesday, July 18, 2006 4:14 AM To: Lars Snith; Xuefeng Chen Cc: Mirmak, Michael; ibis-users@eda-stds.org Subject: RE: [IBIS-Users] IBIS 4.2 Golden Parser Released! Hi Lars, Thanks for your input, but I still failed with the message: gzip: ibischk4.gz: not in gzip format Best regards Xuefeng - -----Original Message----- From: Lars Snith [mailto:lsnith@atmel.com] Sent: 2006Äê7ÔÂ18ÈÕ 13:43 To: Xuefeng Chen Cc: Mirmak, Michael; ibis-users@eda-stds.org Subject: Re: [IBIS-Users] IBIS 4.2 Golden Parser Released! Hello, I take it you refer to the file: http://www.eda-stds.org/ibis/ibischk4/linux/ibischk4.gz Use "gzip -d ibischk4.gz" Best regards, Lars Xuefeng Chen wrote: > Hi expert, > Can you tell me how to unzip the file of source code? > I failed by winzip and some linux commands. > I even tried to rename the file with 'ibischk.zip' but still failed. > Thanks a lot! - -- Those who can, Do Those who can't, Simulate - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Wed, 19 Jul 2006 15:21:32 +0530 From: "Ummalaneni, Venu Babu \(Venu\)" Subject: RE: [IBIS-Users] Test case to see the sensitivity of split C_comp values Sam, Thanks for the test case and the pointer. I will proceed with this test case. Best Regards, Venu - -----Original Message----- From: Sam Chitwood [mailto:samchitwood@sigrity.com] Sent: Monday, July 17, 2006 11:52 PM To: Ummalaneni, Venu Babu (Venu); ibis-users@eda-stds.org Subject: RE: [IBIS-Users] Test case to see the sensitivity of split C_comp values Hi Venu, Basically you need a non-ideal power delivery model in order to see the effects of split c_comp. I recommend that you use a fully coupled (and frequency dependent would be even better) sig/pwr/gnd package+PCB model that has ports at the driver, receiver, and power supply locations. There has been a lot of exploration work regarding how to split c_comp over the past 1.5 years. Zhiping Yang has published a few documents about his techniques - it's a good place to start if you haven't seen them yet. I believe this was his latest paper: http://www.vhdl.org/pub/ibis/summits/dec05/yang.pdf Just let me know if you have any other questions. Thanks, Sam - -----Original Message----- From: owner-ibis-users@server.eda-stds.org [mailto:owner-ibis-users@server.eda-stds.org] On Behalf Of Ummalaneni, Venu Babu (Venu) Sent: Monday, July 17, 2006 4:23 AM To: ibis-users@server.eda-stds.org Subject: [IBIS-Users] Test case to see the sensitivity of split C_comp values Hi Gurus, Could some one suggest me a test case which can be useful for observing the sensitivity of split C_comp values of IBIS? Need for the test case: I am extracting the split C_comp values of the IO buffer from two different approaches. I need to select one of the approach by correlating with hspice model. For that, I need a test case that is very sensitive to split C_comp values. Thanks in advance. Best Regards, Venu sensitivity - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Tue, 25 Jul 2006 15:26:05 -0400 From: "Dwayne Johnson" Subject: [IBIS-Users] IBIS version number commonly supported This is a multi-part message in MIME format. - ------=_NextPart_000_005C_01C6AFFE.A6ADCD80 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hello All, I'm working on generating IBIS models for some of our products but have a question regarding IBIS version numbers supported by board-level simulation/analysis tools today. I'd like to use version 4.1 rather than version 3.2 because of the extra resolution that is permitted in the waveform data for the rising and falling edges (1000 points instead of only 100), but I would like some assurance that the IBIS simulators out there will be able to handle version 4.1 Can anyone comment on what versions are commonly supported these days? thanks, Dwayne Johnson IC Design Engineer Gennum Corporation, 4281 Harvester Road Burlington, Ontario, Canada L7L 5M4 website: www.gennum.com email: dwayne_j@gennum.com phone: 905-632-2999 x 2640 fax: 905-633-8105 - ------=_NextPart_000_005C_01C6AFFE.A6ADCD80 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable
 
Hello All,
 
I'm working on generating IBIS models for some = of our=20 products but have a question regarding IBIS version numbers supported by = board-level simulation/analysis tools today.  I'd like to use = version 4.1=20 rather than version 3.2 because of the extra resolution that is = permitted in the=20 waveform data for the rising and falling edges (1000 points instead = of only=20 100), but I would like some assurance that the IBIS simulators out there = will be=20 able to handle version 4.1  Can anyone comment on what versions are = commonly supported these days?
 
thanks,
 
Dwayne = Johnson
IC Design = Engineer
Gennum = Corporation,
4281 Harvester = Road
Burlington, Ontario, = Canada
L7L 5M4
 
website: www.gennum.com
email: dwayne_j@gennum.com
phone: 905-632-2999 x = 2640
fax:=20 905-633-8105
- ------=_NextPart_000_005C_01C6AFFE.A6ADCD80-- - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Tue, 25 Jul 2006 14:56:03 -0700 From: "Tom Dagostino" Subject: RE: [IBIS-Users] IBIS version number commonly supported This is a multi-part message in MIME format. - ------=_NextPart_000_025C_01C6AFFA.73B4C770 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit I would stick with 3.2 unless you really need a feature from 4.0 or higher. Tom Dagostino Teraspeed(R) Labs 13610 SW Harness Lane Beaverton, OR 97008 503-430-1065 tom@teraspeed.com www.teraspeed.com Teraspeed Consulting Group LLC 121 North River Drive Narragansett, RI 02882 401-284-1827 - -----Original Message----- From: owner-ibis-users@server.eda-stds.org [mailto:owner-ibis-users@server.eda-stds.org] On Behalf Of Dwayne Johnson Sent: Tuesday, July 25, 2006 12:26 PM To: 'Dwayne Johnson'; ibis-users@server.eda-stds.org; ibis@eda-stds.ord Cc: 'Vasilis Papanikolaou' Subject: [IBIS-Users] IBIS version number commonly supported Hello All, I'm working on generating IBIS models for some of our products but have a question regarding IBIS version numbers supported by board-level simulation/analysis tools today. I'd like to use version 4.1 rather than version 3.2 because of the extra resolution that is permitted in the waveform data for the rising and falling edges (1000 points instead of only 100), but I would like some assurance that the IBIS simulators out there will be able to handle version 4.1 Can anyone comment on what versions are commonly supported these days? thanks, Dwayne Johnson IC Design Engineer Gennum Corporation, 4281 Harvester Road Burlington, Ontario, Canada L7L 5M4 website: www.gennum.com email: dwayne_j@gennum.com phone: 905-632-2999 x 2640 fax: 905-633-8105 - ------=_NextPart_000_025C_01C6AFFA.73B4C770 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Message
I=20 would stick with 3.2 unless you really need a feature from 4.0 or = higher. =20
 
 

Tom Dagostino
Teraspeed(R) Labs
13610 SW Harness = Lane
Beaverton, OR=20 97008
503-430-1065
tom@teraspeed.com
www.teraspeed.com

Te= raspeed=20 Consulting Group LLC
121 North River Drive
Narragansett, RI=20 02882
401-284-1827

-----Original Message-----
From:=20 owner-ibis-users@server.eda-stds.org=20 [mailto:owner-ibis-users@server.eda-stds.org] On Behalf Of = Dwayne=20 Johnson
Sent: Tuesday, July 25, 2006 12:26 PM
To: = 'Dwayne=20 Johnson'; ibis-users@server.eda-stds.org; = ibis@eda-stds.ord
Cc:=20 'Vasilis Papanikolaou'
Subject: [IBIS-Users] IBIS version = number=20 commonly supported

 
Hello All,
 
I'm working on generating IBIS models for = some of our=20 products but have a question regarding IBIS version numbers supported = by=20 board-level simulation/analysis tools today.  I'd like to use = version 4.1=20 rather than version 3.2 because of the extra resolution that is = permitted in=20 the waveform data for the rising and falling edges (1000 points = instead=20 of only 100), but I would like some assurance that the IBIS simulators = out=20 there will be able to handle version 4.1  Can anyone comment on = what=20 versions are commonly supported these days?
 
thanks,
 
Dwayne = Johnson
IC Design = Engineer
Gennum = Corporation,
4281 Harvester = Road
Burlington, Ontario,=20 Canada
L7L 5M4
 
website: www.gennum.com
email: dwayne_j@gennum.com
phone: 905-632-2999 x=20 2640
fax:=20 905-633-8105
- ------=_NextPart_000_025C_01C6AFFA.73B4C770-- - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Thu, 27 Jul 2006 18:25:21 -0700 From: "Lynne D. Green" Subject: RE: [IBIS-Users] IBIS version number commonly supported This is a multi-part message in MIME format. - ------=_NextPart_000_001D_01C6B1AA.05AEB450 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hello, Dwayne, Even if you decide to ship 3.2 models, one can set [IBIS Ver] to 4.1 or 4.2 and run the parser against the file. You can always reset [IBIS Ver] after parsing at the higher level. - - Lynne _____ From: owner-ibis-users@eda-stds.org [mailto:owner-ibis-users@eda-stds.org] On Behalf Of Dwayne Johnson Sent: Tuesday, July 25, 2006 12:26 PM To: 'Dwayne Johnson'; ibis-users@eda-stds.org; ibis@eda-stds.ord Cc: 'Vasilis Papanikolaou' Subject: [IBIS-Users] IBIS version number commonly supported Hello All, I'm working on generating IBIS models for some of our products but have a question regarding IBIS version numbers supported by board-level simulation/analysis tools today. I'd like to use version 4.1 rather than version 3.2 because of the extra resolution that is permitted in the waveform data for the rising and falling edges (1000 points instead of only 100), but I would like some assurance that the IBIS simulators out there will be able to handle version 4.1 Can anyone comment on what versions are commonly supported these days? thanks, Dwayne Johnson IC Design Engineer Gennum Corporation, 4281 Harvester Road Burlington, Ontario, Canada L7L 5M4 website: www.gennum.com email: dwayne_j@gennum.com phone: 905-632-2999 x 2640 fax: 905-633-8105 - ------=_NextPart_000_001D_01C6B1AA.05AEB450 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable
Hello, Dwayne,
 
Even if you decide to ship 3.2 models, one can = set [IBIS=20 Ver] to 4.1 or 4.2 and run the parser against the file.  You can = always=20 reset [IBIS Ver] after parsing at the higher level.
 
- Lynne

From: = owner-ibis-users@eda-stds.org=20 [mailto:owner-ibis-users@eda-stds.org] On Behalf Of Dwayne=20 Johnson
Sent: Tuesday, July 25, 2006 12:26 PM
To: = 'Dwayne=20 Johnson'; ibis-users@eda-stds.org; ibis@eda-stds.ord
Cc: = 'Vasilis=20 Papanikolaou'
Subject: [IBIS-Users] IBIS version number = commonly=20 supported

 
Hello All,
 
I'm working on generating IBIS models for = some of our=20 products but have a question regarding IBIS version numbers supported = by=20 board-level simulation/analysis tools today.  I'd like to use = version 4.1=20 rather than version 3.2 because of the extra resolution that is = permitted in=20 the waveform data for the rising and falling edges (1000 points = instead=20 of only 100), but I would like some assurance that the IBIS simulators = out=20 there will be able to handle version 4.1  Can anyone comment on = what=20 versions are commonly supported these days?
 
thanks,
 
Dwayne = Johnson
IC Design = Engineer
Gennum = Corporation,
4281 Harvester = Road
Burlington, Ontario,=20 Canada
L7L 5M4
 
website: www.gennum.com
email: dwayne_j@gennum.com
phone: 905-632-2999 x=20 2640
fax:=20 905-633-8105
- ------=_NextPart_000_001D_01C6B1AA.05AEB450-- - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Fri, 28 Jul 2006 15:23:29 -0500 From: "Dunbar, Tony" Subject: [IBIS-Users] LVPECL 3.3V Example, please This is a multi-part message in MIME format. - ------_=_NextPart_001_01C6B283.B0C11BD7 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable Hello all, =20 Can someone please send me or point me at an example IBIS file with LVPECL33 buffers that use [Rising Waveform] and [Falling Waveform] tables? The only ones I can stumble across have only Ramp data. =20 Thanks! Tony - ------_=_NextPart_001_01C6B283.B0C11BD7 Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable
Hello=20 all,
 
Can = someone please=20 send me or point me at an example IBIS file with LVPECL33 buffers that = use=20 [Rising Waveform] and [Falling Waveform] tables? The only ones I can = stumble=20 across have only Ramp data.
 
Thanks!
Tony
- ------_=_NextPart_001_01C6B283.B0C11BD7-- - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Tue, 01 Aug 2006 11:55:15 -0700 From: Bob Ross Subject: [IBIS-Users] Asian IBIS Summit (China) First Announcement To All: The IBIS Open Forum is holding an Asian IBIS Summit Meeting in Shanghai, China, a major technology center on Friday, October 27. This is an early initial announcement for longer term travel planning. Several companies listed below are co-sponsoring this large event to be held at the luxurious Radisson Hotel Shanghai New World. Like last year, We are planning for about 150 - 200 attendees including several IBIS experts from the USA. We encourage technical contributions from Asia. We expect a full agenda of relevant material. Note, we are also planning a Summit in Tokyo, Japan on October 31 to be announced later. You may want to consider this in you travel plans. Bob Ross Teraspeed Consulting Group Lance Wang Cadence Design Systems - ----------------------------------------------------------------------- ASIAN IBIS SUMMIT (CHINA) FIRST CALL FOR PARTICIPATION AND PRESENTATIONS - ----------------------------------------------------------------------- http://www.eda-stds.org/pub/ibis/summits/oct06a/announcement_chinese.pdf ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ A S I A N I B I S S U M M I T ( C H I N A ) Time/Date: Friday October 27, 2006, 8:00 AM to 5:30 PM Meeting starts at 9:00 AM Location: Radisson Hotel Shanghai New World 88 Nanjing Road (W) Shanghai 200003 CHINA Tel: + 86-21-63599999 Fax: + 86-21-63589705 E-mail newworld@radisson-nw.com http://www.radisson.com/shanghaicn_newworld Content: Presentations and Discussions Purpose: Solicit and exchange IBIS and interconnect model related information and ideas. Primary Sponsor: Huawei Technologies Co-sponsors (in alphabetical order): Ansoft Corporation, Cadence Design Systems, Intel Corporation, Mentor Graphics Corporation, Signal Integrity Software (SiSoft), Sigrity, and Synopsys. Cost: FREE, including refreshments and buffet lunch Vendors: Some vendors will have information tables outside the meeting room Contact us for details regarding sponsorship. BACKGROUND Last December we held a successful meeting in Shenzhen. This year we are moving to Shanghai another special economic zone in the Peoples Republic of China with many high technology companies and many development and sales offices of foreign companies. Many sites of interest are near the conference hotel. Our objective is to reach out internationally to communicate with the local experts and to learn of regional concerns. CONFERENCE LANGUAGE The conference language is English, but we will plan for technical translations in English and Chinese. So presenters can optionally deliver in Chinese as long as an English version of the material is available. IBIS SUMMIT This meeting will be conducted as a formal IBIS Summit Meeting. Presentations will be archived in an electronic format on our Summits site, and minutes of the meeting will be issued. However, no formal decisions requiring votes will be planned. CALL FOR PARTICIPANTS People involved in IBIS and interconnect model development, EDA tool development, and digital circuit design are invited to participate to the Summit meeting. If you plan to participate, please register using the information below: Name: E-mail address: Company: Top-level Web Link: Country: Telephone: Comments: (Such as assistance for the travel requirements at the end) Send to BOTH: Bob Ross, Teraspeed Consulting Group bob@teraspeed.com Lance Wang, Cadence Design Systems lwang@cadence.com SIGNUP DEADLINE: October 20, 2006 CALL FOR PRESENTATIONS We are seeking presentations from individuals who have IBIS and interconnect modeling experiences or issues. If we have to select presentations for the number of time slots available, we will give preferential consideration to presentations from Asia. Presentation Format: LCD Projection from meeting laptop computer Time: 15-30 Minutes including questions Electronic Archival: All presentations will uploaded to our public IBIS Summit archives Electronic Format: Power Point or Acrobat Presentation Booklet: Available at the meeting for all attendees Presentation Deadline: September 29, 2006 to produce the presentation booklet for the meeting If you plan a presentation, please ADD to the above registration information: Title of Presentation: Estimated Time: (30 minutes or less) We will notify you of acceptance and may follow up with questions when we form the program agenda. Note: Vendor promotional or business information is prohibited. Submitted presentations must be in English, although the delivery can be in a Chinese. Submissions from Asia are encouraged. Topics may include behavioral modeling of buffers, interconnects or other system components. AGENDA 8:15 - 9:00 Sign in, casual conversation, vendor tables 9:00 - 12:00 Presentations 12:00 - 13:30 Free buffet lunch, vendor tables 13:30 - 17:30 Presentations 17:30 - 18:30 Casual conversations, vendor tables The specific agenda is being developed. We expect nine or ten presentations covering a range of issues from existing customer experiences, existing clarifications and some of the future directions in IBIS to deal with technical advances. Several major IBIS Committee presentations from IBIS officers or active members are planned. Several presentations on IBIS applications and behavioral modeling issues, including interconnects and system components, are expected from co-sponsor companies and/or their customers. LIST OF NEARBY HOTELS AND TRAVEL RULES Hotels in all price ranges can be found through internet searches. A link to the Radisson Hotel Shanghai New World is: http://www.radisson.com/shanghaicn_newworld Comply with your travel rules, such as indicated in the link below to China and Shanghai. Work with your travel agent. Notify us as a sign-up comment if you need assistance. Visas, if needed, should fall in the visit/business category: http://www.travelchinaguide.com/embassy/visa.htm - ----------------------------------------------------------------- - -- Bob Ross Teraspeed Consulting Group LLC Teraspeed Labs 121 North River Drive 13610 SW Harness Lane Narragansett, RI 02882 Beaverton, OR 97008 401-284-1827 503-430-1065 http://www.teraspeed.com 503-246-8048 Direct bob@teraspeed.com Teraspeed is a registered service mark of Teraspeed Consulting Group LLC - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Wed, 2 Aug 2006 14:41:01 +0530 From: "Nekkondi, Hima" Subject: [IBIS-Users] no convergence in dc sweep This is a multi-part message in MIME format. - ------_=_NextPart_001_01C6B613.92FF3D57 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable hi, =20 when i am running the spice simulation for me this eror came =20 error : no convergence in dc sweep curves at -2.5000 =20 can any one tell me why this error came and how to debug. =20 Regards, Hima. =20 =20 - ------_=_NextPart_001_01C6B613.92FF3D57 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

hi,

 

   when i am running the spice simulation = for me this eror came

 

   error  : no convergence in dc sweep = curves at  -2.5000

 

    can any one tell me why  this = error came and how to debug.

 

Regards,

Hima.

 

 

- ------_=_NextPart_001_01C6B613.92FF3D57-- - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Wed, 2 Aug 2006 15:30:09 +0530 From: Subject: RE: [IBIS-Users] no convergence in dc sweep This is a multi-part message in MIME format. - ------_=_NextPart_001_01C6B61B.19033B47 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi , For this you can use below solutions 1) increase ITL1 (this increase the no.of iterations for getting operating point so that simulation will proceed) because reducing step size is not proper as it is limited to 100 points based on the range 2) if you are facing problem other than 1 st point value (prints data for few steps of PAD voltage and stops because of convergence) increase ITL2 which is DC transfer curve iterations 3) instead of giving as entire range say=0D .DC VPAD -1.8 3.6 0.06 You can print all PAD current steps individually using . RERUN statement each for each VPAD step value but here some manual work is required. =0D Regards Kiran Kumar =0D =0D ________________________________ From: owner-ibis-users@server.eda-stds.org [mailto:owner-ibis-users@server.eda-stds.org] On Behalf Of Nekkondi, Hima Sent: Wednesday, August 02, 2006 2:41 PM To: ibis-users@server.eda-stds.org; ibis@server.eda-stds.org Subject: [IBIS-Users] no convergence in dc sweep=0D =0D hi, =0D when i am running the spice simulation for me this eror came =0D error : no convergence in dc sweep curves at -2.5000 =0D can any one tell me why this error came and how to debug. =0D Regards, Hima. =0D =0D The information contained in this electronic message and any attachments to= this message are intended for the exclusive use of the addressee(s) and= may contain proprietary, confidential or privileged information. If you= are not the intended recipient, you should not disseminate, distribute or= copy this e-mail. Please notify the sender immediately and destroy all= copies of this message and any attachments.=0D WARNING: Computer viruses can be transmitted via email. The recipient= should check this email and any attachments for the presence of viruses.= The company accepts no liability for any damage caused by any virus= transmitted by this email. =0D www.wipro.com - ------_=_NextPart_001_01C6B61B.19033B47 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

Hi ,

     For this you= can use below solutions

1)      = increase ITL1 (this increase the no.of iterations for getting operating point so that simulation will proceed) because reducing step size= is not proper as it is limited to 100 points based on the= range

2)      = if you are facing problem other than 1 st point value (prints=  data for few steps of  PAD voltage and stops because of  convergence) increase ITL2 which is DC transfer curve= iterations

3)      = instead of giving as entire range say=

      &n= bsp; .DC  VPAD  -1.8   3.6    = 0.06

You can print all PAD current steps individually using . RERUN statement each for each VPAD step value but here some manual work is required.

 

Regards

Kiran= Kumar

 =

 

From:= owner-ibis-users@server.eda-stds.org [mailto:owner-ibis-users@server.eda-stds.org] On Behalf Of Nekkondi, Hima
Sent: Wednesday, August 02,= 2006 2:41 PM
To: ibis-users@server.eda-stds.org; ibis@server.eda-stds.org
Subject: [IBIS-Users] no convergence in dc sweep

 

hi,

 

   when i am running the spice simulation for= me this eror came

 

   error  : no convergence in dc sweep= curves at  -2.5000

 

    can any one tell me why  this= error came and how to debug.

 

Regards,

Hima.

 

 


The information contained in this electronic message and any attachments to= this message are intended for the exclusive use of the addressee(s) and= may contain proprietary, confidential or privileged information. If you= are not the intended recipient, you should not disseminate, distribute or= copy this e-mail. Please notify the sender immediately and destroy all= copies of this message and any attachments.

WARNING: Computer viruses can be transmitted via email. The recipient= should check this email and any attachments for the presence of viruses.= The company accepts no liability for any damage caused by any virus= transmitted by this email.

www.wipro.com
- ------_=_NextPart_001_01C6B61B.19033B47-- - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ Date: Thu, 3 Aug 2006 17:37:35 +0200 From: Subject: [IBIS-Users] Differences between Hspice netlist simulation and Hspice B-element simulation - bug or feature? This is a multi-part message in MIME format. - ------_=_NextPart_001_01C6B712.BEB27DEC Content-Type: text/plain; charset="iso-8859-2" Content-Transfer-Encoding: quoted-printable Hi experts,=20 sorry that I trigger the same topic once again, but now it keeps me busy = already more than one week and I am pretty sure that the problem is not = a way how I extract IBIS model, but somewhere else!=20 Before I elaborate the problem let me notice that I get the same result = if I use 2ibis2 or s2ibis3 or if I use HSpice or some company internal = analog simulator for extraction of IBIS model.=20 Let me elaborate the problem:=20 1. IBIS model is generated (say with s2ibis2, but irrelevant, since = there is a same result with s2ibis3)=20 2. I take one of spice decks for extracting rising waveform generated by = extraction tool (say a00DQ40.spi) - this should be spice deck for = generating 1st rising waveform in typical case.=20 This spice deck of course contains the netlist of my circuit.=20 3. I modify this spice deck only that I instantiate in it just = generated IBIS buffer model (in step 1.) as a B-element - in other = words, I just put there IBIS model - B-element and do nothing else 4. stimuli and load for netlist remains the same and I use exactly the = same stimuli and load for IBIS model as well (of course, netlist, IBIS = model and their stimulus and loads are separated) 5. simulate such modified spice deck with HSpice and compare the = outputs: netlist vs. IBIS model Problem: What I expect to get on output is very good overlap between Hspice = simulation of netlist and IBIS model, BUT what I get on output is a fact = that falling or rising edges don't overlap i.e. there is some 30ps delay = (Please take a look on attached snapshots "zoom1.gif" and "zoom2.gif"). = Signal "dq_40_ohm" is output of netlist, signal "io_ron_040_hspice_typ". = You can see a real delay and not some different slopes due to different = loads. Transient analysis is done with (.TRAN 1.36e-11 1.36e-09) - i.e. = simulation step (for IBIS extraction) is 13.6ps.=20 What worries me even more is a fact that in some cases (for different = stimuli frequencies) I see that rising edges are overlapping and falling = are delayed and in some cases (some other frequency of stimuli) I see = that falling edges are overlapping and rising are delayed, so I don't = know even where should I cut ("taylor") my V-t curves when behavior = seems to be so arbitrary and frequency dependant.=20 I know, some of you would say that 20-30ps are no problem, but exactly = this 20-30ps are shifting (upwards or downwards) crossing point of = rising and falling edges and destroy duty cycle and data eye diagram = (target is 800MHz). Problem is independent on slope of stimuli (so with = 1ps slope or 100ps of slope of stimuli I see the same result)=20 I know that we should not speak on this forum about tools and vendors = and I terribly apologize that I will still mention some of them - but on = the end all our models are used with some these tools and I think that = it is necessary that we exchange information about our experiences with = this tools as well. So the problem is analysed with different tools: - - I see above mentioned problem when simulating with HSpice (versions = 2004.09, 2005.03 and 2006.03) netlist vs. IBIS model - - I see effect of above mentioned problem when simulating with ADS - = using only IBIS model - rising and falling edge crossing points are = shifted same as in HSpice - - with SpecctraQuest (also simulating only with IBIS model) I see the = right results! So I am pretty confused, what is correct? A few different simulators, = but only one is showing a right result (or at least result that I = consider as a proper). What is your experience? Have you noticed something similar? Can = somebody from you do the same procedure on one of your designs (compare = IBIS vs. HSpice on the same way as I done)? Has somebody an idea, proposal? Best regards / Mit freundlichen Gr=FC=DFen / S po=B9tovanjem Radovan Vuleti=E6 Qimonda AG QAG PD PDE MUC/10.2.236 AP 3 Am Campeon 1-12 D-85579 Neuebiberg Phone: +49 (0)89 234 20108 Fax (PC): +49 (0)89 234 955 5305=20 E-mail: radovan.vuletic@qimonda.com <> <>=20 - ------_=_NextPart_001_01C6B712.BEB27DEC Content-Type: image/gif; name="zoom2.gif" Content-Transfer-Encoding: base64 Content-Description: zoom2.gif Content-Disposition: attachment; filename="zoom2.gif" R0lGODdh/QPRAvcAAAAAAAAA/wBVgACAAACqgAD/AAD//yQkJCZMvysAAC1b5S3lWzv6NED/z0lJ SUxMTFD/v1FR+1UAAFVVAFVVgFWqgFWq/1clO2D/r2ZmZmiCim1tbXp0gn8AAH9/f4mg5Y8AAJKS kpmZmZ8AAKct5aoAAKpVAKpVgKqqgKqqqqqq/63Y5q8AALJNerKysre/Jrflwbflwr8AAMaM58vB 2MzMzM8AANytwtzlLd7e3t//MOPlt+UtLeWxLeW3t+bm/+eMjOe1Ke//IPP///oTQP8AAP8A//8w AP9AAP9QAP9VgP9gAP9wAP+AAP+PAP+fAP+qAP+qgP+vAP+/AP/PAP/fAP//AP///wAZvv8NyQDo uAwABOcA/NADlACuAACyAADDAAHdAOMGAAAZAABHAAM4ABMAGewAJwAJcAC+AAHLACNgABcAGSAA TQAAxBcAACAAAAAABGgAvgAAaAEAAAMAAAAZGQAnRk5wCAAEAACAGQACJ2s0cAACAgA0TAAAAgQj TBggABgAACcAAFgAAADLAAUAAP8DMQAOgwAwfL4ZGcwUJziocAUZAAZGAKAIABUAGTQASIDoRAIE AMYZANW+AOJoAL4AAMwAAAQAAL6+vszLygAgIL4rK8tdXPzMzAAAvgAAyiA4KBAAsQAAXAAAFQUA kAAAEQAAfSMAiCUAOL4ALcwAYrgAwL4AGcwAJ7QAcLAAA/MAZhUAAHQAAIAAMwAAFAAAKAAASAIA ANEAZQMABf0AYAACAAE5AgAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACwAAAAA/QPRAgAI/gBvCBxI sKDBgwgTKlzIsKHDhxAjSpxIsaLFixgzatzIsaPHjyBDihxJsqTJkyhTqlzJsqXCCy5jypxJs6bN mzhz6tzJs6fPn0Btwrw4tIXRo0iTKm0Bc6nTp1CjSp1KtarVq1izat3KtavXr2DDih1LtqzZs2jT ql3Ltq3bt3Djym269ULRujfk6t3Lt6/fv4ADCx5MuLDhw4gTK/ZKV6tdgVwbL55MubLly5gza97M ubPnz0slY32c16jd06hTq76hurXr17Bjy55Nu7bt27hz697Nu7fv38CDCx9OvLjx48iTK1/OvLnz 59CjN2eN+yhp60Gza9/Ovbv37+DD/osfT758Set3mZauKhq0+/fw48ufT7++/fuD20fVD7XxddPr UcUffgQWaOCBCCao4IIMhjWgUw+Gtt5/6l0VYYMYZqjhhhx26OGHZF2YlIhI+ZceidiBqOKKLM53 xRVbvdjijDTGhyKARy2UomknBjjVjTUGKWRhLxbJV5EwupVkC0gayeSSR8loFJRDVmmlYUA25mOJ OzLVo4VbXinmmEciJWVcUFKZlppUnhnlkmqSKeeca2W5XpimdUmhlgp1SeefgJblplJOvpkkjE4W OuWgiT6l6JNpPknooFMu1SaTZmIaZaCcdsrYlgRJmONTF+j5pVF4MuWnp6y2KlWc/ptWKuubix4K Z6ya4prUrbPCeWims+oqLKKZRurqsciOCGqeSmlJqqmQ4Yjqs9Ima+2xsOYq66W6/gosm9zuKq62 3gZrrrnEbmrstex22l5ppTZ7J7UV8hhtvS1Q59qq7fY7Z7bhrksuusIuWrC2mhrbJJuWjuutwP5G LOa7p4k6LYTQTpgqhBtL7PGMAI/bK7DbioxwrHFyq3BUKTtc8sEfx8yinaNiXO2eHcsr8841Ukrw tyQnbPLJQhPqMsosN0zymRDz7HSHNF8cWsb87pfz01grGHDB5Q488tFf58qr2EsrHbTYY2eb9doI Rp0vvSbe6zbbdDPY5K5uFipw/pp5983o33xT+ijXQ+Oqdt2I0+e2vq1RXa2AVycuOdaHQ+UzVZdP rvl7c/844ansRb756BJXTvrpNHYuVdwag4n667DHLvuCqluNHuMw4Ya7dLz37vvvwAcv/PDEF2/8 8cgnr/zyzOd+2+6y4W7QwtRXb/312Gev/fbcd+/99+CHL/745Jdv/vnop6/++uy37/778Mcv//z0 12///fjn/35BJ+rv//8ADKAAB0jAAhrwgAhMoAIXyMAGOlB/HPic3F5Egwpa8IIYzKAGN8jBDnrw gyAMoQhHSMISmvCEKEyhClfIwha68IUwjKEMZ0jDGtrwhjjMoQ53yMMe+vCH/iLkQARvNyEKAvGI SEyiEpfIxCY68YlQjKIUp0jFKlrxijwUogSLeAUsevGLYAyjGMdIxjKa8YxoTKMaZ6hFIlrHiGuM oxznSMc62vGOeMyjHvcIwjbai4t8DKQgB0nIQhrykIhMJBn96KUJdlGRkIykJCdJyUpa8pJrZOSe 4IjJTnryk6AMpShH6UlN9u+RGQSAKlepShq08oSsfKUFW/lKWYYwlii0JQhjucpbAgCWv3RlMFn5 QV26UJbGrGAyScnMZjrzmdA8oikducFkLnOXwdSgLq+pzWxys4Pf5GA4MTjObipzmNn0YDlLiMx0 XnCd0YynPOdJz3pWcJqA/jTnLH9Zy176MpX8DKgwy2lNgRJTmAhFKDwTes529rOh7hQnOiGqUG8K dKATTShBLUrRijLUniANqUhHWkl8vhGV5EwnLS+60ZQOVKMRlWg3cVlRg650hO08J0w9+lFw6tSV NfVoLx/60J7KVKdEDehFScrUpjr1qXM0qWk4+U5i3rSoxcRlUn+KTYr6s6o7xWpXf3pToS70qjZF 6kSLilYR8pKlaTUqVOdK17ralYlSZQpV9wnWlR40qy7l6TptWVaIwnWnbuWoYJf6VcC2dauLVatc q8lRXkb2rpjNrGY3K8O8XmCvXDUrO90J2cGqlLFrTW1oAUvWwxLWtK0N/qtqZTtZffKUr2LlrG53 y9veWtCzoP1oW2sbWNyWlZb/lGxsh3rYxPI1sseNKWWXq1rmcjW36qxsdQvr2+5697tOBS5KwWrc jmLzoMMlLkCR+1qlNhee7bUoWxvL2tLO9q+ITS5Mt7pQ8Pr3vwC+pHgP2V96FjjACE6wggc5YEMe WJ4PXrCEJ0xhNDY4pTRV4Vula8INhzPChqWvDD3M4Rx6GJwlrrCKV8ziMV64xTCOsYxnXM8X0/jG OM6xjiNp4x37+MdADnIaeyzkIhv5yEhWIpGTzOQmO/nJKlwylKdM5SpPWbxCzLKWt8zlLnv5y2AO s5jHTOYym/nMaE6z/prXzOY2u/nNcI6znOdM5zrb+c54zrOe98znPvv5z4AOtKDRvMU3DvrQiE60 ohfN6EY7+tGQjrSkJ03pSlv60oMu9FQfyOlOe/rToA61qEdN6lKb+tSohp+m9ZrqVrv61bCOtaxn Teta2/rW3hviH09q5V77+tdHHnD6KjhsGhRbg8VONvqIvewNKvt8zIa2s5v9bPNxsNrluza1ty3t Y2cQ2+TTdre5bW1gx1DY5+NAtMunbmOnW9zsXjf52o0+er972uazd77lPb52I/ve9ea3+Pz9bYDf +9/7dnfCA67weOPb4QxHOMQNnnBzvxDdKxQiszNub45r2+PuBnlw/keo8ZBHmeAYHHkQO37yjbd8 2iIfrwlLrvIQlvzfMQc5zl9e8z6yPIU0l3kJb17wnL9850D/OQqDrnOLtxDj46MB03kudBISPeVV J7nSTzj1pLvc6zDXZio32PW32nzrM0f5BXsugra3XYNd56Db357BuG9w7iKAu9otSEEE+P3vgA88 AvS+ccEb/vCDv/rauxh1pje+44/feOTDDlDy1l3p0i2x4vnOePFJHfKed3zo9+70peu6kYCkIACu QGIPd9Hu3/4g7FMue9KbHMUcnr3V0T503u/+42InJ9l/vnokjVP3Wgf+3UXQJLr/1vcVbHvz835B 5NNA+khy/j1t/t/3BzwAAR8Iv/g/gIDvf5/wIUfAKr0P/vGHv/yrVH/iud/F1bd+w6/vuP3vz8v8 b3z//MdK/hdyABiAqjSASFd5tRV3xsRNm/d/rOd6+Pd5EGiAAkiBBBiBFrh6GFh6LIRxBWiAAxhc 1MNBuleCw6d8rIVB1nd2X2d6L8h19CdO72SCxNck9ld7MYhhmjeDd/cisQSE1Qd9zKeBB8h6Q7iD FlSEQYiEz/dxiGd46Nd3UViFHVh0IchKGeB6GKh6RiiCXVh/XxiAIyiGG3iAV4h1uNeDMfhaHvSA GUhiY4iGTJeF/FeGrjSH94eAHnhyq/ZZnZeHZ8iBcdd5q6SB/kVyeTsIhAd4iEIHhz0nfOnUgj4X g953iZiYiSwIfSungsI3Szb4dQDIekLYQchXfKWIfgl4Qcx3hEXSiE94exjUiqjIiE4Yhj/oiraY TZDYReX3ADwQjMI4jMTIA0mYft53hvP3cXYIABlQA1v4VnjYjK03jXpYjbhIjUF4gb24hqaIdtjl Tt2ojXpojYNojmfIh31oen9IQe54jXKIi2u3jY6oiLLIiIfYhJvoiWO1fUoYYpblj7L4ADuwAw+Q AgiZkAhJkAZ5jD2HJClIeQp4TWWHg/hlj1QVhBmQAV+4jxK5hKSIj0XSigIJWq1oPSQpj7MYktST kt34izzg/n084AM0WZM+EJM46ZC+mIwbuIwwh49aWANCGY1BiIsimY+NmJSECHpIaYeIaJRjuDBN qY6L94nmNYUyl1sAgAOTOINA2X8TKHrnCJW8xABmGY9wuI4r146BqI1cWIgFiIhoqJOLR4/1eIyr mFVdqYQBGIuc9AA0YJAKqZAECQCA6ZdC5wKK6QILo5gemZc1CFSheHuo2IipiJXvtJi1CISaiZdF l0EnKZIv4pK8d5LSSJpKGJot6YQvKZPF+JrBSJe/qIxpWJVZ+IxCOZT9l43w+Jb615th+ZsCGJWk eIi1yXnvxJWxFZF7JVZbKY4zGIILMJ1KWZR1+IXTuQDY/nidZQkADICWtqeWZ8eWcZiOKimXxTeV qNR1Ediexrd/KNWNFrSR9JkBLiiLGHV/iHlBDHmQg7mQBXmYJSlzjOkCHEk9jhmLkAmKksmcqLSZ V6AAEjqhCoCZs6SZb9WZCvqZrMiSiDiSSAh7oSmNV0CSIuqhq/lLrQmM3pedLvqiLoqLVWiF4/iF uJmbusmNwmme3MmjO0qOTymfs6Sc2LWfAMlLyvmYWIidAKCdzYiOq6SdTuqbFchK3+mdVyqNxyme a+lGm1aeUephU4qHxDaco2icRmpsjpiUIumZalhBGYADcjqn9VmnHslJG5imNNCf/wmgDamn0Veg B1qi/m53BQm6pfj5iWxImbuoAE0ioRiJUgCwmJRaqYq5lx95fcWJfyaKdiNamcXXqTtompwaojMI ky3aojCwqqwKAwvwAK+6ALgIm7RKjIjqhUGJozhKlEtZpRsIpRaIjtf4nr2aqc+pnwNqQXKqSnPa rMsqTDiwoWpYgFOqneXIm6xUreDpq6qUpVm6m2nJpW94epsUiEBJnW+FrsVqRF+InvZHikZqhLuY nmh6q6gUp86ar3Jqn3QJkPf5lwHapynQn/3KiiIgqIQ6d4spkAt6lZE6SwvjqEjiqBVasK5UqRQ6 oZfqplW5ktRYoqY6qiHpikcoqolKqqcZsjCHqrAK/qMuO52zun7AaJM1GZOGCQA8gLP26m6rdKO6 Co28iodHqZTuKrRFK43GKZbAaZ0+SANcyU/5yqzNmqYG+KwMW3TnGqbXKpZhqkpTqqVc261WSqXi mnbkiate26TpqrZ0yHLySo/FuZ5ui5RxS7TS2rE0gK/66qz8SrUXOa4vyKd9SrCAen0isACMiT1X +6ZHNZlwlJ6kSLESGqEvUrHJeqGUKrFFIqEugKl5ibL9Z7J79amvGKoqO7qbmrIqeqoymaqZ+Lot Oqu1Ors7u38+q6vPGLTY6qPcCoY9iqVW+q06qnxb+bT8l6bLWrx7+7Qci5zUGqWly7TcWq3RO7xg /uqdwRucZWu2Xspq5amt2dq1ZPq2TfiucutyRTu0HLi4eIuvdfq+dqqSfwu4AxmwgxugdFmnboe4 lkqp/CqkM7Wojxuxj0qhejqpmfuoEeq5HAqSteiIo3m6MvepTSi6E4yiC2OyOMeyrwq7ryurTJez g2iMNapKt5ubuSuvu/urKzwALuzCb/XCA4COV1rDYou9Sdu00KqvUjunfnu8SjqtGqiuV7AAqZvD vkrEThqVK1y9wovE27t7Z2uGbFvFaXvFRgs+yep5Owun+/oCYBzGYizG/0t8yvR79WuQHky4yTqo V5ABCtu/ilnG/PhcFHmD7qm5kyuxlsuAGBuh/ntcuc2bmiwJwaiZqJrqlIdskhgMosG0ojEJq2uc iSDccSJ8hiQcnayXuz+bwm36u8G6wj+wSqPMS6W8rlTsrTj8ncJLlcjJg62HvE+7vMk7yGD6tXUr vRkYPrvLet+pgU/ctlEsxd0LiCEHhF9bxclsrfJIvmYakvGqnkV7t6+ctziQAWOczWHct2V3xsmX xgUZzuIczgIqj24Mx20nx3PMvtU8kbmHxxNrPX2MeX88sQbMzoQMqqi4yEKnmhnMmqXZyBH8yKzL opI8yZdYyRt3yRuYyR8HhLjps55sfEY7lRYtzMesgad8yqx0yhXdnav0xK78gj3srCUdrZeb/p8k ZrU7y4jq+q5GDK5M2aS47LVMzLVXcJbAHMwjPczDN8WCuMxdq7XNLIBw+67RzKbvarf4fHtxis3a nM3cbMbebJV3ilIMGaCvS84Fe87prM50nKkWBKk0MKEOuk+xJLmUu8cHXM+ATLkRSs18OZpFOJIp qZLvRNfTd4uzF6p1rde8WNCR3MEIDauyO7u0WrsRGNFDCY3Ug8qCyLtgutFv5dErvIdQjHTFa4Cy fNLNGlAordhXPJxFLNNVmsyoiNrCeqVGyNOI6tOXB9Srh9pqS9tGXNRGTbRIfbny2p5HeIFNDUcb GdVSbbGKhdYPa0FZbZBqfIlcraf6e7Bg/h3cVUfWFWTWyb1BmhuxbZ3A1TPP/AifCYt9mNqc7ol3 lwl74o3et7izHFzYsct0LzvfLyraJjyUE42DwOq7P0rZpgzFaGumdlmsSMe8yjunJ/3DKx1RJWzF SPnS6EjbUYrLTQyEwFy9PQ3bmyjbpZ2uEk6marqm05ymH8qmTynXTg3VxL3Nxg3LGZXSeyrOBJmJ zw3jeUufXy3HYQ2Z2H3dZW25hXtBFLvWfNzdi6nWSI7iGdmu73nV5MTkpevked2EUW7LVIgAgw3f hi3fMrsAMfDlYB4DXxur9n3f+a3fl83fvurfsWTZoPyV9JrZDaxMxktiheucSarkZvjh/tmaneYo 4bHkojRcvjltt+Gq4dsH1C8C6B9+nnSbviRu4qXbnlZ+rytOxlL+XOqkp8s945hY43gNUfAbvwDs 42Ut5NcN5KGOQdv9qEaumK0+sXo+5Q6VTAyogWht65iH64alig2c5fCt0CFH38Qu7Dj3lfR5PZCt vkeL0e9IytD+385uiPkolab9kc+ZX9ltx6SV5y3NenwOtkwJ6Nqb0Tjcf748iq+N6IlezO8Y2SwM l85M6Rb7lUwexO076vCb6ZZnW3aX1bAL6pSog5lasUBuuapufUg+5OCNn2m91m8d19QNsSL2jaLI 6//6oBhfiRIJ7IUt7BRE7iRm7EtK/qLWA9luWe4BzuYdDeBU3JTbKpHZru38HmJjV+nwjrTi3rtk iK3BnJQMEKThye6fx+FjaXftOpzbbu/6iPNUJ1FaBZ07CN81n3b82ONjbepBPtbyvPXX3fUTD+9o bEQAOPaPVPbfnIDCSNgIDfJdJPJiWuZU/tj73fN1WAB4j/erlPd8r/fTnvPVWe6reFoOyHvza484 R44q//KhfJ0/D8FmaZYZTvQguLTXzknUPop7BXvM/og6LIP/aFsWC/qIjMYNm0H37PU/nrGpr/Cs 3/qaXPH0G+C956u1L9ZsP8luTwNwv2EkL8RySPdpbvc/2vjFr+ZinesWX/rl1OD4/rf4gE/8PH+H 687uUDd6/4iCFlpwTTKZp5/xbnXWT390c+5B1q364E/+0yr7s19/7L/8qvf+3l/+vK/lu9/76frt vCx6+w96/S95AHFF4ECCBQ3S4MCBxkKGDAU2hLgQAICIEBMufFhRo8aLGh8aBBnyCkKFND6KRPmw 48mUIkluhBlT5kyaNW3exJlT506eOhPeaBH0woUbQIWepAHgykSlTJdOfNoU6kuTI2FahbkSq0eZ HStm5Km1J1WwO8X29BqxrM+Sa3OeDVvyq9WJbDHSpfi2LV67HrcyXBBY8GDCC8iOLJxYseG0EB9K hRxVstPDSSdDdZp5qtjImjtv/t5r2fPlyFTnjoVrVq7akZ9dS678ejRlzqRt0149Vvdu3r19/wY+ 82fQFkOLEr+AFG3o5XdR527oFmfqvtJvUte70bpN7NOZx9X+N3vV586b+y1P/vzp89trdr/+XXX4 9O5pNo4u3rt58Or7BwcwQAEHJLC34YQiyqjiTkqoQQcfhBDCuyKksEKtLMTwwfAy5HCvDjOc8EML QxSRwg1LNLEqFFMUaMUIT3TRQRJjvJDGBmG0cUYacdxRRRtr/FHHGHkc0scg/foRyByNXLJAJ5+E MkoBDywuQeQ+SnKlLNvaUrsuTfryijC//GrMLDEiUy0zk0TzTI/WPLJMN8Wc/hPOJtWs00052QQz Tz6lBDRQQQfNigMFjTvUPkIXZbRRRx+FNFJJJ6W0UksvxTRTTaOkEtEr6dwyVFFHJbVUU09FNVVV V2W1VVdfhTVWWWeltVZbb8V11EOtPCpXX38FNlhhhyW2WGOPRTZZZZdlNthdjzuqJWmnpbZaa6/F Nlttt+W2W2+/BTdcccclt1xzz0U3XXXXZbddd9+FN1552X020XnvxTdfffflt19//wU4YIEHJrhg gw/+1lDkeF3wihUehjhiiSemuGKLL8Y4Y4035rhjjz8GOWSRRya5ZJNPRjlllVdmuWWXX4Y5Zpln prlmm2/GOWeOO2U4OYd1/gY6aKGHJrpoo49GOmmll2a6aaefhtpmnqFtOGqrr8Y6a6235rprr78G O2yxW57a3rHPRjtttddmu22334Yb6AAfvinisj+NO2+99+a7b7//BjxwkmkYonDDD0d8IcQXP5wG uhmH3HGI745WcMsvxzxzzTfnvPOVCYcccQ0UD/3w0R8v3fDTJ1cYQap93riIIjRmoPbaRb5dYttz 97x3338HPnjhewcdYw1GL/5hpph6+HjJk7fYebtbr/J1gTKWXfaMeefd4+4f/n548ccnv3zzz28a +oqdh375iZpfPfn3IX5fetbrxfvi7GdfIXuKw1/B7QRoO/AxIIAGPGAC/hWIPgY20IEPhGAEN6Y+ irGvcPSLGADg97wLKk+DK5if/R5GuapVbH/a6x8KdYfAFe4OgQM0IAwT6EIJ1tCGN8RhDgVHwYlZ cAggdB8IN4i6DDJviPdbmPV+NjEUqvBiudvdAVkIsQEWUIHfA6AOtbhFLnbRi0jjocR8CMTlCXEF 9qPg/I44Qup5qnIRO+EJU2ix7lWRilGEYgxfOMUFftGPfwRkIAU5sjBGbIwf9OAH0djBRCJShCsg IezgGMc40nGKdryiHq2Yx0wO0pOfBGUov1hIiB0yg4aMHyPnF8LVsRF/b5zkw/znxIpxT5NWnGEV OclJUfbSl78E5vDk/hfEDRYPkWY84jCLeMZWQrKNPbsexPyXQjnSsoUx7CMB8bhHXEYxmN8EZzjF qbdhlrGYF3TfMRf5w4s9MpLRlOUktbe/lWVxnPfEZz71GTbQHc+f//wn6QA60HUSdKCSc2USzRY0 e+7ToQ+FaESHRjiDHpSiFQ3o4zCaUSS6bqFAa6hERTpSkpZ0cACim02m98oSmtSlL4VpTIX3ziXK 1KY3xWlO4UbTlG7Kpz8FalCFOlSiFtWoR0VqUpXK0xUo1alPhWpUpTpVqlbVqlfFKklYKsl0dtWr XwVrWMU6VrKW1axnRWta1bpWtrbVrW+Fa1zlOle61tWud8VrXvW6/le+9tWvfwVsYAUL14R6NH+D RWxiFbtYxjbWsY+FbGQlO1nKVtayl8XsXj1Q2OotNLOfBW1oRTta0pbWtKdFbWpVu1q4emCzztxq NFk7W9rW1ra3xW1udbtb3vb2q67lrBtL6FviFte4x0VucpW7XOZ+FriwVehhmztd6lbXutfFbna1 a9rnMnW73wVveMU7XvKWV7vdfaYSG2le9rbXve+Fb3zl21f0xvZn88VvfvW7X/72F7z1je4b/Ttg AhfYwAdG8GUBbFgBJ9jBD4ZwhCU84bAuuLPSpXCGNbxhDndYvBYWLlc9PGISl9jEJ2YtiKF5XxS3 2MVeLchao+IU/oK82MYoVrF6yXhjHpd4xgJR64wx02MijzjHni1ykjUsZLYymclKhrKDj4zhKFcZ wU/GzFJqnGUgN2UgStmylcU84Ck3eMxn7u+Puwxk2zyFzW52X5fRPGf5lnm4dMazfJ085OWRxsue AXSeBT1eO4t40Icmr5yH7OYw/9g1gUZ0pK9baNlK2tLbVfOiR8PozqwZy5cG9XEpzeJQl3q6NYYz mLes5TVrJsymhnVxR73eWNca07bGtXVnveNc95q6n/Z1sHe7a2EXe7nANnayU/xa7yrb2c+GtpKJ HW1qV9vaRmZ2epF8bW5329sGnva3xT3uXCtaKsiGcVfRLets/tuX1uSGd7wRzWoaQ1rd9uZzc8Mt b373m86phkzAv+rnOFd33/5GeMKTfJs+NzzObH44wZV7cIVX3OIolgzA853ugF9m3b2l+MVFPvIl N3zPYdW4uT/O25CT3OUvv7LJ04lujUOl1dNtOcx1vnP9qvnkYE25q6mbc54X3ejsFfKTHT1zLUcc 36Jud4DvfHSqV928yF75xh2O86gzeOpWB3vYs4v1s34668Pu+oXNLHa2t525Zk+r0nWd9hBX2u13 x7vFiZ53vved23v3e+AFn2zAwxXug0d84nFM9xW/u66HV3zkJa/hwrf1y0w/++Q1v/k6M17HfIU8 50U/+v1W/t6toSd96lXfXtNbfuCrh33sCe35becV9apmNMJ0v3ve9973vwd+8IU/fHB1uPVNfj3H My975id7+f49voy3LnCHP7/51++19fkbfb/WHPvfj/bHk47WpJtbrCvXPmK531fvg9/9zh/rz8mq 6DebNevpF+z6Qa/19/c/2OuWv/hbOuoDOvsTLf3bq/bzvwW0tfHLjIy7vC+DuwE0u8vzslYziKeb LATUKwVkwA8stZNLNU8DM5t7PQqEMU4rwXMbQQ2ULA60Pf4DwRm8NBHUtAecvurbOixbOo8TOhmk LBjEKw+kwSIctD27OUcbwIiTM4nLN4CDQj7DP8ASwrsi/kIjxMI5UzqP4zQSLMB6Mz8TXEEfvEEC rKwqtKsrzMI1tLIt3LSmUzUzDDQLVDcLJMNzc8HIQsPHA0I29MMoA8D4g6wppELao7JB7MM/VEQi C8Tzwz06BLoMPL0DNMS1Q0Q5XMRMvDHxc0THIsRCDK7G47XHUkNNNEUT+8TOC8XPm6xSPMVX7LBU jK89pCtXhMVbpDBZhC9anCtbxMVffDBdfC9elCtfBMZjNDBhdC9ijCtjRMZnTDPjq8Svu0RlhMZr DC9rZC9mNLxExMZv3C9tNC9ufCtnBMdzRDppXMXaq0Z0dEf/EsfyIsdJxMR3tMd0XB4j0Md95Md+ 9Md//gTIgBTIgSTIgjTIg0TI35pGQ4ssc7w4hITIiJRIiCwygEwnA8BIxItH8ppH16vHYptIicTI kSTJkjTJk0TJlFTJlWTJlAzJl4TJmJTJmZRJlNzHkWSKjAy8jZy9dTxEUvTGXOvHLNTHizQAv+PJ D1tIu2vIoIy1fcxEI+gqncS7pAyvjkS+jzQ1qDTFopzKvLPK/1pKUmtKrQQ1fTxKWJRKr0pLtwvL 78JK6TNLSUNLYFzLr3RLdYQur2PIdsS1ukTGu7zIvOSwuAwypzw0I6DKYxTMwWS7t9wuw4w7xBQ0 xWzLZ2zM5VlMq4PM8xpLx2MshzwzqbxMzMzMnHxM/r1sNskSTTEjzXM8TdQMu87MLskkP8qcs7Us zWuMzYnYTaOjTeyyzbLDzdH0TXf0yqn8TZ4Lzkn7zFH0xOJ0Td18x94EgOXcueacO5+0RKCcSzSj Tnu0TuyEOe00uOekrNZUMq8kT2gcz/YkOfMcOvRsRemssvC8x/GsOvnkOu6kRu/kzwQrys1EzrCC T5HjRHGExPIDtuXjSWQbTgP8Ttc8zntkCv08uka0PXoTQxMMQ/vMyvkDqwgtK/UkMva00As10AwV xA7ctB1Mvu6TUK8iURGd0Pus0BQFAOu8zgOtOAfMMleDxIJjtSaMw8+AQyk8wSbEwCRk0g+NQyU8 /lI5rNEWDdADw08d5VEfVTgb7DQVrMMxVMEo/LPZSMEy5FCIm4wlLDgkHVOF9M++BFBLu0su5c0V LTovXdMc1MEfxMMg7bin48LpazoGHVIzDToqpU/WBNGKlE0d3VGxslN/Q8IoZNM+RVMljTEl5biO gzgcBFKUw8EnBMIq7cQrJTAUhVQVBatJ7Tc31FQwnTkxvDkWXMEn5NB7y1QSTNNbhTw7fFMaXdSy RNUBq9NVZdWvclV+g1U3hdLIsMM3bFMaa1BpvcARfNIGzbgHNFJhjVOm9EtEO1ZkjdRWzdMWXS1t vFRgi0se/FATtTHBXFb3xFOd09AU3NQElMRO/oy7fQW0AHSfdg3TMITXFxtXci1XZWVOG1UtZVS5 afXWvVS7/6xFgrW3gnWxgyXXLV3YwhzWIdRVAsRYFJNXhJ0Ijs1O1dS2n0zDkJW7G3XUR0VYlC1P lXU36OTDWeW/kT0xjZ3Zen25Yk0ugdVZT63VPCtZkz1ZoHU5oUUuon24W8VUpNVMpV1aph05p4W6 byVLkLVWndXa+UrO67TahFXYmvVYrgXNxeJZEktaq+VRskXbDTNVUYVZHntbuMVaBLVZqZPT6Lzb eHWfeQXHuCXcbxOyllTcxWXcxnXcx4VckoRTia27rp1Tqq3asjVbtpxbyvvYy8WzvNXbvbW4/rBl N7XF2dBs1IzNXM013M7NsLr9QtN9r8Y83G+MW7mNz77lS3AF3dwcXM1N1rPd3bSlXFFMz9Ul2dYV 3tdtWt6d2L9trLbtMNEtW+ctXrr9XMClXfey3tE11+c13tUk1tANXuG9WtJNuO4Fue2dXuU1MXm9 XdiUVPHVXtRN3sBtse+93vrNXs/F3/rU3+WVWfTFXr4d35XtTu413wJuXv/NWuit3LVVLOrVMNtF 33yEYAS+3+NlRUYd4Phl3gw+4ItjX5ZzX9UN4RLjX9dVX4Q7YbQLYBCO4fFq4f594VeVYOQV4BoW rxsGX+J93389P4Klv1U7YgBkU5ozvwwc/lIGhdjA8mHckt3km+LvAuIg5lxSlFWy2ziGQ9Q8fLRE rL+B87MjltrmvGLbqmLlA14HJuENHmIILNFpdUKtU+I0ftYxljlchdEpFaw1rq021lVBzq4sVtoS nl6AjVGwfTU85lYkDNlO5UFOLVNLXuEQBWAPZsffpVA4juPwHURGZrpGrrcOReWjtbmXjdFKXuU+ xmQ13uEPLl/wBOVQFmJPfFhqXVBSFjiVI9Mo/tcYc8I2+9NYTixDni1CBts31t0Mdp8tnd9a/OIZ 7UOADWY+JeOLJeJ8PeNknuVOZmDjvGUDluMKPmVcRTVCLeUSlFI/ZWWIdeJc3cFvBsNL/v0rZV62 Ga7lMUNkLcbL0Mw0b2y0R+Tlg15lhsPnj4zWL15Qp9NmGU3gm81ffa6uf05kmm0vi96/ifZb3x1n fx5haB7egN7o8eLo1GLmNk3p5vJZki5pxzThcGbZObblHIVpDRbl0qXpBbZpkS5nXN7imfbo3rXc kLYyjAZomf7RnqbYn/5knM7pk9VodBZSJt5CnytaQDbjesZqzJPAJO6zJA7Olj6tlZ5aHA1qoTbp Cu5CDSS4OxxoPnZZMz3TZ+1WuaZV2jRr7kphtoXf6l1rtmZqwD5mTvzjMwbjSPRVuBZUPvbSwJ7M oo5ekIbqpB5sc95pgZ7kLyzk2WDl/iKdVVemZDeGZJaO6AR0aulV4b5Orpee6s0tbLb15bFuZDpM 0mHGY4v1bNLu5ajd68FybdJCaz9Va6mObdk+X11e4nxFZVL10Gr+Y2H+ZWLmZiksP+CWQOFebctu baBG7tge29kGZ7q22zk0uYK2487WymImYmGu7Rik7AlOXcMebuNSahfebMTa1qze7ve2begW2eu+ WGKm5xcF1AS/QMme7A4m33A97mle1aoWbp97ZLCO5Gy1Y/U+5uo+1LFebNxDaBF/Zf7u7qO+7CiD 7eSmcJR28fnmYRoGbwmH1BYXr/umZhinZQhX8cwm7OXu0hOn4PLGcd/Kb9fF0KbW/nFxTvH1HOnk Tt+2hmEhr2+rLvLeWnEoT/IgX/Ka/m7MDm8oV+4nZ1Yq11cn+3ALhrAsZ/EcZr8Lp255nj9gRnOt jvPiunLn+mvDo2cvRG0wf2Yxj2kgN3HHlkM/7+17Tmzdfjszl+9Ave48160jf+D9DuQ7J0JnXGy9 TmflknTM6kh73lkGnzBKr/ShLu+rXtM3A+YGF/Vgzm3R9q1PV7A9L0dG521avy1T129UL/RRvcEk zW77Q0EQN3ZgF9NZd3Sv9fABz+QMY3Mtt3QpJtJNrTko5mVWD/BXF3Y4XMJP1/UztHV6PHQQV3MH i/Y2z2XuhmUddG5zzOZ35rKG/iZ1ywr3IBx3y+tzBTx3AfVxmN7yX7fVYJeNDvXXHtx3bgXwZO+t e9/AfNd3Ljw8h5+tdBdvNz9zslZ1VJvrSBTrRQPWXZ534qJ4PYR4an/2UidzQbfxcESukoes4i5D J/93gJ92lz8umH8sme/wJLN4dfd1eHz5Ze9nmg90QY/mm4c3nXcsnu93LK15m1/3Mu9yn/5yKPv5 i596eWP6xnL6el/zqCfpgA9kOE/tVC7i3Dt2zLvzoa/6p756o6dxkyV7lL9mILzjeobnUqY/6+p6 xvr6lI8wXv/xMM9nTMf7A99qJIU0ifd7oufxExV7qQ96wHLAgg7rvqc5rsbm/oXPe936+8UK/NAf rawHeim3fCLtU2Ff+65ubOoWdfPeLdJPrNHvccNH+ign78NP71WT7sa3buOWwdj//NyiffU7+dQX /LDH/dyve95HdqFz7vZud7z3fDG2reMfLNvH+skfe6XvaJD/QdbnU0lU+7YvY+jeY9zS/vxLft5v /8wyfa2v/Hx+NfUOibM3d4Pmf2gN1f8GCAACBxIsaPAgwoQKFzJsCOCKw4gSJ1KsaPGiQg8eVqzg wOFGi5AXLtwAKfLKFY4YVzaE+JAlzJgyZ9JUaISggZo6d/Ls6fMn0KBCWd5MmHMo0qRKl1Z0yfQp 1IwbO34M2WJkSasXUKqM/prQpVOvYsdKLArgKNm0ateybZvUrEG0bufSFRu2Lt6VGjl6NHmVpN+t KVe4BZv38NuBchEzbuz48U64BRdDrmyZ4d3LlvdSDQxYK1fCbQ1rLl3RLGXTqlezXit5cuvYjjPL xsu5r9bPJwcXFki7NmvUwIcTL07zNU7jysn+Xk72dlWRuq+G7v3SuWrh2Ldzd45ccffwQZuLXwrd c9bdXdmSLv9Yu/v48t8rTD3//kTy+H+ez52eOm+j+bbfYUXZRyCCCSr1nUAHjheTfgShBBZKElaI 0IQFRcjdhgrO1J90/wm23lrteegaeCequOJPDDoIVIdfDdjSQBde5xRt/hXaeB1+MbJ4EYh/iVid gDz+KBZ8Ryq55GlGQeXjQSbKKGGNMxpZ5YwZ7gclkw4FiVVgRLJnZZdMJVkmmmkO5OKTvmn5kpYZ QiTnQztqWOddmeWIJZk4iselmgh9Od2Ioo15ZaBBnZkooz+y+dScVNY54IWVukmmhhTyuamkRobl Z3iANjrQoEMGeKioozbZoKqtqsjgWZDiGWeVn2aJ5YR04mpQc6D2ySl2qY5aapinloipqzoZ+GKy zXYHK7M9RcprrZK21yuVeirkq6fAOidso8SCZqxaUjo7k4HnqisftLLaeO2k8cI7q6V4UrvtnLbi Cq5m/CYqrnqGHovo/rorLVowwss9uhSF7+47rY7e1ihnrm6++amdGE/bnb+BAgwgieUim7BFB5N8 cm0LH9Zxsyyn+XGh1rlcsMko27yaytbFezNmPJM6FW4hFhtyWub63FDNRyvdWM6Fvbl0lErDLObA M6+7LNRZQ9a01rNJDXR0Qg4tsMgEd11QumerjRfXa+dldZdTk1v0yG4DkLbdeafVtt468yw30czV 7TbefRv+VLt2SZuxnZ1KvOXXfIUN5riBj2U04SkevvlSfCcFt5U45othpiuCviTgZNNt9tpJc/56 ZE4qvpOv3FpcuoqnK5m6zJtjDTvwQHn+E62z1lrp0zSGTnq1x1ds/vztuq/uM+9FSt9q4cFrr6zs Svk5urwNO76QvmbbivGt52tK3PUsVo+q76xuP39Nwy+erbUW5towxVLazqeJQJWvipUPOO1b0fuq Fr9Y0a+BMbGfT+ikL/Tl517mm9jFdqWtx63mgCpKYNk8mCjXObCEDIEg7aqFvEtB70b7G9+lGoes 8hnGYStkX+Q645+x9c5wJDQhEA+CQtrV63lwQp4MeWVEe2Fqg8tz4bsihsOjgXB1IgzU74KoRaR1 z2+XuaKsqAg29PDQeofL3hbTiJAhMgWMNRFdcdyIoCoKjnVnQ6Ma87imLh6qMks0YA6DJrbKqa6O ciwTHvWYRzYq/hIjh9wPHS83uK79sJElZKQlmxLIyRGKaiH0oeYyuUg+ipImj8RPJE3ZuOTlr29Z LGUaMQlLh5zyPqmUiY5oyLxaHimRs7wkKX/JEl7K55YQ2tT/buVK+QlTi7Js5pSoN8YdEpJ4yJQY 5u7ITGia8JnctODfpim0akaQU6zcld4q+U3OfSda6yTfJslITmldk4UWy6bW1PlOUCLEnfuMmhgl J8+AWfNX3sJn1l75z+15c5/EjI8xYZJLCx10kgnd5kKDtz+NnTOjzJOmQKlJUOI5rIV3suNFGehR 2F3ILM9DSxJXykGERTSMD30VRmXaNwrubEc35dxPxVPTNlp0/mn61KnS7uLSGVEmqIZzaneGyrCi Ku2oSPVZnkizvplmFKrckar3qHo0q17VZpm5iU9l6FW7rRU7YP2cWH3my7JqTU8bfeFJ6dpW57wV KQg1ak7perZIRcoId71CTgiL0oXudTl9HcpfqxpYwdYVTkc8rAEU29jBxlOkICukJBc71lBSlrOl 2+jOuPrPzRrnsUKJrFxJW9rKGgStqG0qZVlbHNc+SLSxnexsl5ZVWiVPt7QFqQ7HOVL42Y2swS3Y WZWp0ri+07jD4S2MqGuzuT73aDyNIgyval3gYLeg4+UOd7uLVacUxYhHialOzyub8pbTtzdzrnoR hloMdrSs/vKNDX3pad/tyja/amtnfv/bmgDzBLb3LbCBKdnPBHdWuZ/tYesgHOGUHsSfHlUwaxic wgGjLL0bHu2Euwvi1YB1vwJecXFMfGKeNfSbMDbNUFepOweXWMMzlmyKn3vj0tSUPKfj8cnw+2N1 1ZibQ9aMiHWCZJIpecnOajI0n3yZKL9Ru1T2sZVpHOTgankz4hzkcvEVVhJ/GbhhFnOH1VvmyuS4 v1L2csJk/OY2x1nIFUbzhfMDX1zimWZg3nOPx1zaOUPGtYOWaKGvdmhE8zkuKv4z5dLcEjsTms0I qzKlVYVlYTL6MXV+9Eym/OlJh9rQis4tpjs5tyi5UdWu/p5uq+HcZzLH2lSWm12pTQPqXDMKwX4O aHIBHbOeRbPLnpY0q4l9rnZ6eLW9LiNm7PriAydH2r/d9aKvPc9N//HOz2ZytL3drFHPMtiN4bIp Iz3tdKvbVeyGpbsZA+9Uy/vK9K63qIPpX3Fr2orcdjPA5/1qvRI80MzNZ7cTnmSBi7fhy344h3Et 8VWDG9bIFmSmHa5ACf974yOkeHwt7kmDkxzhJrc3ymWab8Tsu9Mz31rEX35rS8/25nmp+THP7e+S 6xxN9xalz21z5pBffOQQJ3rRu3T0TCa9LkCHtNCTBZdqRz1NU7dk1ely9WH2G+ZQ7/qSvt7IsM9l 7Cux/vXQXY72Ysf8wyqfdWjZnpetzx3aHR/4xznpa9ACu+Ua7zv26t7Vu//aK3Bfd84Rb/a/Vzzw AxX5JzN+eMk3Su161Htb3M5E/bHy8ZOXO+cRqXjGMp7wuATfR9EJNclwPfWOWr21Le/Zpo+YdXvK euIjb3u697P2WW59QS8IUNDThfbDPz1sPI5ckMu68UFX/r2YPxe+Pz/4lE+57i3Me3MTzK71Aqzw u49F3FcX+fUt/5S03xbnq39Unlej/NPi9omC86T5R1H61Z/Rsd86/d9YiF4GTZLpBVwACqDUEaCN uR/GodjZOeB+3F8aGaBYiN5FLKD9RZ8FqkniMFz4/inbyhnS7PFcCIogBB5fCTLdCeZdCoLgCg7g wsmcBDodBVZgDbJLCzaTBnoFB1qEBxIfD/ZgfGCgFgVhVAyhJgFf59EgEjKJEgYRE0KFE1JEEZ5c A07hilQhEF3hU2RhBUEhF3ahF57ICFbe9Aketumgrh1hGoYHGJaQGDIFGUrEFrKgFM7h7d2g3b1g 9bleVOyh16mgH/bSD/7SHZrH0g0ihn2bHCYidtShAzWiUuRhRBiiDaIhJRKIJTYQJiaFJtJS2Rnh JH6icoQi/YwiUpSi8rgiUryG8anis9QHCbbh5Y0fCu4g6tmiDy4ivuVg5kniLwJjEgpjKcmiUMAi /rMxo6IgIjJ6CCtuDzQChTPCkxnyoSdOYzB+3+IJ4uBF4oP1oTeCojIiHTGynDFu3jneRzVqzzXy xyOOoxn5oju+4zeCY+7p4u7FYOHhYy3qo3GsIQ6K4xsWYxweI0FuRzwCzzz6RDZuyylyYzc25C0C Yj+GU0iJH0A6XkUeojRi5Hw8JEutYy8uZD6SpHiY5OtEZE9MZPwJJEuio0Y6FErKYDsOZE2mDC4i FUzyhEzuEk32JDz+JPj5o0fiXUCqJE8aZWsYZCAqpQkyJUhuYyemIlSWhktuTlDuxFAuX1FuZTLe ZAHmZFOW40WSZYyl49qh5VV+5XHwI1sqjFsq/pJc1kRYZt9OPmVdciVSrlRe0sRe+t9O/qV7SCXr IeS4KWSirSViAkdXPhVcFmJIqp45RqZ33GUeDeaH1GNCsiOBZaZmriJn4l9ltglWPiBplmZbmqWT paZNHaZrotdpZqBsEtVqUuFI1qZpwiYQ5uZU7aaS0KJf+iZ9ACepCeeaeSZR9CZyviZdxiZjFlxK PqZWRmeB3OYSMidcEacitqZ2ysZk6o1zxkRhttJoQuZ4CptyMqJ3+tVl8qZ4tmdUcmcYxidkzWfa Qad9kid+mtB5wgQCJtE5cWJx+ud/3ud7DmN1Yp6UwR4A8eV6KsZxLujeNegy6mcZXol+IOgf/rIn hlqGsU0lRyYbDFrl9eXJ6KnnxNXniLqnhlIdh+qhOW2V7L2oiMZock7ncj4oL8ZbE3XK8wxoySgo j8qoj8InkH7kiuYVooAoi9BikhJHiS4mVaao9UmUhGbJBhnpquxolTLGlW7kzRRo7Rwof4anmI7p ds7oWzapiqommE6EcbqpT8IpXtZodoHnFyIpnpJogIoin5pXhTJkoJKpnn5eodZXnZYFoCYqzi2p g2YpJN6jjmanpI5FearNo1pEeuZonkXqpjLNoM7Pp1ZEqEpXpSFqqdZFp5qWpdrjBNIMlb4qziwq asrpls5mpjbIheIqp+oqbvIqIdIpdrqq/rBu36nKY6Nu26+u5LIqKrF2p7GS484p67SyRawe14lS H63CYbZK67a+Kamq47Vi6qjCaLmyTbVa4bM22Jr+Kbu2a/M1K0TG64il6kIgR7Daq5ng60mma62i W70CrFt0K9Tw60Ss6o1E678ibOe8q4Dqq7kxbELcqsRO6rmCncU6G8auUcduLABSapzOamhe57hG LMkOhcIm1ccKacgK0ci2LFm8rHfFLL/5KTXWrM0iicAClc7aXKuS689ya9Aezsw2hMNKqYJo7NEi Bs7yzNIyRNPOa88ebNQOK8USKsGKq8K16dYGbNe24tAGXdXukdaObVRM7c2krVR0ZFX2/qpuwu3d +CzbIk7S7tTZYh3c+mvemiveWivKNqZoGuzaBi7Zmmxn9i3Z8SyCQK3iMmvZWqPjvh3WJojkTu78 BeaPFq516uTKcq67Vq5GXa4jZS4obi7pluzg5ufXOmbciW3rRqPp5mvsHu7samrtosve5o3dCgpo Gq7K7q629q7tMu4WBe9BXC3kXuDrIq/w/K7bMK9BOG/asq70cq3yEu63uiHxim7Y0u729oTbkoz1 FgT2jqvRlu+CUK+nom4Hqi5+AK77um7iwi7oQmjxal333m+LwK+sfu8uOimy+h3vAvBz/m/F5m7/ eh/5KjD33K5Xyi8R0m9JMrAE88T5/kKXBT/h0trvBnNv9JqtA4sv5JXwCM8lBVPmCadlCkfwCvtu C/PtC8clk2nvDE9s8THp/gapKpmfWmFwWebvDsdODQPv5fLfTDntUarwET+QAC/sEpuTNs6sCEcx VLgIy7rwDxvw43pKubGq/05GF2uxnXqux97wk9KaWI7v8aIxDWuw5bIx1vke6RFxeWSxHC8uHZ+u HYcxtlBoDMtwH2OEEXRwyyyxhN6QYRpv+x4yB09xzgbyMJXUGD8sJJ+xJDtEIlMy1X6wFupxS0Jx JyMyKL+tKJchxvLxKb+FIrdK+hLE+hZyAr+yJ6cyyszyz8itlh6rr5axEeMyTHxy/hJ3DS8LRC0L syETc5iashcT8D/OaTBD8C078wnFcqMkMwAsszXHMTYbjBov7yrb6PPu8R+H80UYczpH85kOb+jC 8AdCszqnsS57sCUPJ8PqcD1P7zELVzlvIik7ZDv385H+cyV/MTXXLTODs0EjsjanCTd78zw380NT BDvT8wC/sy9fasGeoUNfNCrf8yLnc3NCXySL9AQj9C4HtCmec0ZatEpjdEQvyUTDM/+iMCqm9Ewr S0bLNECb9Hd+Kj/3tFAksr9yslm5dCxas1IbdVn89FkYwFMnzE13dLjKrkWGNFTLBFJvHVWbsELT rT5X9DV3NUQj9VRTdVWX9FgD/jNDs8tXw0q/4kRYo/X2zbURsDVf93Vbd8lVo6hHD4xeF7ZhHzZi J7ZiLzZjL3ZfI7ZfP7Zf4zXTNLZlXzZmZ7ZmbzZndzZdFwxFv4pU3y1lq1tgg2vK6vSUqrVAfHZp W9lpg28847DXjfZrU1psF/BCl/VtS29uTzNZn3RvI+9vL2VwD/VwEzdTP2Ny925xzy1c83Zzk+5z /zK2TnfeVvdgazV2j612Z7Xudrd3L/cVi/fkfndqy7N5Ry16h696r/fPtvdsWyZMw/d/yndOv7d9 kyx+AzFt7zd7kzdF1jeAa2d/g3FcF3h8C/hMKviCC7V8EriD1+aB77ZwTzh//jM4UWJ4hkP4fko4 h0dmhR93hHNziLvgW1/3iU/riEf3ha94u7a4isM4rso4Sf3GIJs4jVeqNBu3ixNhl6bWI+/4ttq4 gEVpjhN5uRq5vA5pkis5i1exkzc4lAsrk/feBFF5lb/qlZMfRw0X/xyWmI85mZe5mZ85mqe5mq85 m7e5m785nMe5nM85nde5nd85nue5nu85n/e5n/85oOc5Iwv5QG+5oXsJTvv363GLjh/6xjqso0f6 UED6PQW6pV86pme6pm86p3e6p386qIe6qI86qce5hg84Mm90UKc6q6c4XTR6eCV01sC6ap1Mlw9M q8+6qq+6rnv4d+Y6FQN7/rB7K0cLNnjjOrHz+rAnO8z6eoQLe7Mze7T3uqvPBa0XOotc+7WDeLaf uqR/OykmOoKDO7njmLhbeLmne6OdO4mru7sfBqW/u7xTRLzPu70zLbv/+L3vu/7l+/SQ3ixz2rqU XiZbNaqdy4EWvH5pzV7+HlbVerLYjo4n08LP0MLC+lCqaUIHvBVDe0tD6XoxvL/XEcBny8FvM6Wc /Kh8uckz7/eoPKOAufpULcS06Mk0vJqxENzCEbfHR6/wvN2mFbaXB3yBV89zjAsNvS2NfGhFE8W7 ii5ZtTbyiMvPi8E7PcRLtHTNMs6j+tOrCosqfagwG9UvddnbOtaLfbAQ/lDWt0rXU1RPtX2ZOFHa 4vhWfT3YqyfNO44j433en73NvD0URT3CF6ncowle8Q+RGnxJHT3HJOAS+f3KP1HgMz2/X/7PWT7m b75b1DvnX77nf/6+h77o2zvpl768nz7qu7vq9/Egr37oaT6RFxBAwf5atP4M037/2f4Byj6NF4/+ xDrvj6Hv/37HA/7wb2Dxw7jEO1HyC+Hyr3gyJeDzQz9Wp7f0H7/kVz82Rv+Jnx8GCT/3T7r37/iH jr/1Gzv2z/7Uoz8elr/5N5v7O+L1u/f8339E4D7+07j+7/+K9z9AABA4kGBBgwcRJlS4kGFDhw8h RpQ4kWJFixcxZtS4/pFjR48fQYYUOZJkSZMnUaZUmdGDhxUrOHC40YLmhQs3Zta8cuXlSp8/gQYV OpRoUaNHkSZVupRpU6dPF7Z8GTNnC5s4aVrd2RNqV69fwYYVO5ZsWbNn0aY9KRWmzKxXq17YukJt Xbt38ebVu5dvX79/K7Kl+vZm3LmAESdWvJhxY8ePIaMV7LZm4beHI2fWvJlzZ8+fQeOdHNeyTp50 Q6dWvZp1a9evX48mjNU0V9i3cefWvZt376GyK9PWetp3cePHkSdXjhu41dLDubaUPp16devXsWfX vp17d+/fwYcXP558efPn0adXv559e/fv4ceXP59+ffv38efXvz/7/lTKzoWTizj+CCzQwAMRTFDB BRls0MEHIYxQwgkppM8/0gKc66UNOezQww9BDFHEEUks0cQTUUxRxRVZbNHFF2GMUcYZaazRxhtx zFHHHXns0ccfgQxSyCGJNHGw4Aw7rcglmWzSySehjFLKKams0sorscxSyy2BPBLAJGMKU8wxySzT zDPRTFPNNdls08034YxTzjnprNPOO/HMU889+ezTzz8BDVTQQQkt1NBDEU1UUTgxNGzRRyGNVNJJ Ka3U0ksxzVTTTTnt1NNPF230sp1ILdXUU1FNVdVVWW3V1VdhjVXWWWmt1dZbcc1V11157dXXX4EN VthhiS3W2GOR/k1W2WWZbZZWUU1zVtppqa3W2muxzVbbbbnt1ttvwQ1XXGb/g2tUGtBNV9112W3X 3XfhjVfeeemt19578c1X33357dfffwEOWOCBCS7Y4IMRTljhhRlu2OGHIY5Y4nq9NNc0GrBFV1p0 K9X4Wo+tBblakakleVqTN8b444lZbtnll2GOWeaZCa74OQFVrpYDlI/dmQZKr+CZXKGX9flao61F WmeilVWaWp9pjlrqqamu2uqr4bU5w6B3cjkmjyH++meoJ+5aZa+RjlejeMU2m12D8oXb3baDbplu tMG2O+10reh73SIAL8LfwNW1QmysEU9c8cUZb5zicm/u2u2J/u9+WOzDaUBJXbMnl7jydwGoQfTR SS/d9NEBYHtvdQU6VaB6Wzf1dXY/p3x12/NGV/N0a+/bCnUJdzeA4Ykn3t3ABeedbMeZb97556Fv WOskz9Y7d+l9xhwAY2fPu/N0SV249nZDt6iG1LO+PfNV0VebfdrVj3j8fze4t/bti+1+7Nx9Bx7w dosXQAG2K3j7i94BEZjAiOVGXdM71/fCFr+AEWRdlyPb9k5HOoGcr3wbDF0GS6c/ztVtc1cYCAQF Nr91dXBWHlTd9fD3PnjF0IQnJFX7OCZBy+lwXw4wgQzsdb8rgFB0Huxg+YioQRx+zm/pKqC6Asiu Af4teJhT/uAVsZhFf+FQiwNbIuS2Vj2WqfBfAOiBGc/YwOxdcIhJdKMbRVi3zu2kffhjFwn9RcZ0 sVBWLkxf7mJIQzreEHSlMogh1Xi9e1FwhQ1RniL7VYEDMMEEJ3gcDNv4Rk2eTn+V658T/wdF48mr eOwKpRW7mEpVrnKPrBTYF6E1HDEyK4eQLKMZ0ZjGWhpQdzUkSQkVacIVTg6F+dKj7jhoSEHWUJnn e2H1ArnM2Anzba6zISJ3+T39uQuHXOQi+R4pRn+FQAAd0AEUkIACegnRJIms3idp8EQalHJeUfSf 4FDpSn3uE3rfZB0j+QlO5cUSZ267QgYQmlCFLpShDXXo/kLrdkx9DaQHZ6zo7CzIOhNu0o0bPZ/o aghMcdKRXSIgIUkBJlE+mnCQN2xpDZ35R2jS8Zq+xJ8/l8lM14VTm5nzp+662U15tU+i9qqABDog hClUcp232x4AchBVqU6VqlWtqkc/GFKe1q2J6Apluui5rq5KcXj3LEI+A5pWtV4NpwpZq+7USFDJ nTShpMqAXfG6k7vqNa8H7Wtds4nHW1L0jAPZpfY8ylEQbnSIodOq9wR7UPAFzaQe+6m+VJpMlrp0 sy3147vudlOCKNOG3kzVNGUX2Lft8Zvocy1cYTvDrQKsAhQ4gAmmoIMk2KCpmIRqVCMQXOFGwKrF jSpj/j/6WAN2DZ7xTB5Yy1o43033d+saJSjR+lbtbtdlrT0IEMC7TX7CcjbUM2hd+Zpev6p3r+t1 b3sBu1zB9ksgOCBIRXVpQMR+UHQk8O9//9tfAJNAwP5l6WjjGMwM7LFUKrssZnmITNQq87Tle2bX RFvTgqCUwX1U7QobyTrWstawapvtOAVwABCYgApUMIEJlDAvdkqVuFOtsXGv+tQTdjJtY33iddFF XSFXF7pUzC53kZxkhnnTIEEIAgDACwTxNrLED2YceZH0QLo+lMtd5nJEI7zI1CHEnfsl3YABXOAA 1wDAnT0wDkd4x38q846p6q04yafZWH12bmkTZOsA/v3nYaJqwoSUL4nbWmKftjK2oDsxv0JAgA0c oAO41YETbGACGTvVhDSm6o1xPFU369idzCWyc60bXRpMt12shm4A/HdkJc+a1q/8J0Gc7GQoR3nK QK1jrx2H5S9pGXxeNvaxEQpmW8ZtzDiwL0APy0YAoLl01GbzgEGKwSIqN86DvuFTVZUBw452vvBb 9h45SJGYgtbPFT6tt2nKzAmjb35MFnHmYFvHoT5aXxuorQMkUMkpTKEJJmDBpn2bA+F+ergNdzhx WYo65d7Nx89Fl6pXPVZ2NRfj8ZR1rUEecnz9eiC51vWuwztlaAO7ccK2mCzPi2yZP1TZeJ5os50N /oBnm5uX65s2ts8MdGtHfNsJtrlPfelzgyC0kPLKbPko/G1DftTKoW3hoDf87dJ++N6LfltQu+5o ruNrAxSogAAmDYIDLEEKVHACEph6YTw+Vaq/DTWOiX6+iff41F+dp6qb666xAvmsyxP54REPOxKb /OQol7J4oe316Lk8clzb8l4xn97Mr3fznddrssd+88w5274757mZFbtYbevd6MWEsx3ttT25q43q o4Nptvm7UQvLFMPuJjTWyU3TrR8axCwXati5yW+jEoACDnB+AiptAihMIQomyLTTOW13u9+9uHkn 9WwrLkrpghJ50j01xgufePWv38RAZfyTBxLl/sd7F/KIJvmYffq6cSs6/92joJUXKa7Ki9g0Br08 j/M0LwER8KBAj/j2Rf9IT+d6LaMYjL9qQAFOBwNNRwNJx/u4TY7KbV1IqnUWKQRD721qD/dsb4Oy jepmb32s6feqyaZI66aUT/JmiP8aLflOcF7OrvkcYNI6YAJGgAmiQAqcIAlM4AhC4AV7Sfu4D+9W 7/tUK/yKjG+qC3nKDwvFz53Y7wvB0LXeD/7ij9d0MPL+acSqzLX2jw3ZUA1nh+VGTgCz7GJibubw UKFqrpjmBQJzzvTahQKfcHQUoBBLpxA5UHQQsXQ8sPVMkME0KgDZ7dwkLN0ewgV5r26kqaY4/kyj 4k12AukGY48HZasH48X5HOAAVFEVO2DFmOAJkHAJTqAELCkTNQoKo7D7pnDvwMYKLw7wrGAgLM7v 4AnIPg4MkVHJxJDxDEL+Ig8Nfc3+4jAa8y8aFe0gdpC+6HDY7PDy8uoAwVEBP++uTLH/uAnnSo/l BNHnFBEDDbEdL5ADDfEdL7AR4QwE+7COHlGg+owSM4fqou4T6QgTJ1GMaOiQDI18OMuQEtIB44YU xc4h5yUEUnEVU1ECQMCHTMAJouAJmiDTksAJfa7ucIwITPIkT1LUdpHHerHvLO7v+KYgYM2riPH8 ZnKXkjEnRW4ZG68ZU26boBGgEoLEqLEN/qVRB7doG1+uoLxRAcNxATdvHPew3LAxxHTuD+VwHZ8K HulxHuXRHeXRHkWKD5supcIMiXKPBWvg9tYSLUXyIDXMfViFi4qqFFer/SQSXiCgAvgS4CTgIodQ BkygCZwACp6AkgSzCQtycuguqravqojAqiJTqsQS/Fwy1QpHJmnS4gbvJntOJ0FTGXWnJ7/rJ+mP fK6xDeNwNd2wGn1tzKDxAZWy8mYpD22zAVXI//THD9MRALVyo7oSLAlROLlSASoTsuJmH4PoLFOw LdMyLQmyH/EspxqykFTlm+oyIkEML+sSAyygAkIAPDcgFVOxAxyg0k6ACZyAI5tgCUxg/gRibDHn rtMcsyQlUyUziQoPreIsDsiCUSBUrSa7ECdDs0C5yw1nIEERwgwh7wxd0xyLkjWtUTcp1NYGagC7 sdiSrVSeskNNJb5yk+RuLQIBUabMLDjjcThTtDiPs3rIUjv75eks0SGiMxDjp9DkcM5A0Ub9MQfr jzsjrAEqoAHC8zvDMzzLcwJAYMVMQD2fwAma4ATgTtPk8xZzwCQBACW11CQlMyVb1JMuU5Q88wpR jQvJ9DMNNE3TiuQStE1ngCAY9Bx1E6jgMEJb0zXnVEInaDbD6A4/1CkBdQHtCjfD7EEJAisBMNpu kR7bMRHj0VEXsUW7beSU887IEi0D/lKnBnL3qvTrCoLZPpVHj+7rtnMHAZCoeGgvLSA8ISA8wfPf OoDSfAgEZHE9PRIxRyAKOvUJSTIX65MyV/KLWjJMxTTVblJAz/QY1XRZs+j+3LRNyxApbw0oGQk2 WZMhXvO1YlM2L7QOYe7ybnPmptJH/c/XSvSZ9stRFTED2bUt8/MDe5SbKhXhRhXdkEgF8bUta5Tn UChRR1E6LxX/Rmxgs/Eu81JdvrNVizQ8m+8AkKoDRkAjCfNJnYCSTkAwd3Ukf9VXt+9L90bj/O4X BcgzkfUXvZBZUZaV7k8gnlVBoUxaV4ny+rQpA7VVwBFEdUhP8e01l5NAt7KIOClo/k1HUvFxoszS H9FyBZ9zBfe1gnjIX/vQFs+R0Xb2tXb2aiOyqIr0VStg0iRASTXSBJaAMNczCpggCY7A4DK2MXPg tx7TqtwWPyWOJcWoq7ZQTMOKJscvWQ0vZf0Wi4KKIFr2TWE2ZvnUvGgWKl/lZgnVlioUT3PUaX02 se4VdT5Kgy53Bd/VER9wXkUyz47oEjkVYB8xcB2JajOWYGPr1+xv38oxXYyULynAtiTgYU1gxZRg MDkSSgvO+uKOX+cTCgXi7oa3Y4O11LgKZF9SXgqoGDFOWf82eoONygT3WSNXi2QWcTU0XMX1BFPT DQvXRKWNIGbUiAqifN8s0MbS/nMVMo+YE+qkLn43dd1It/2o892wdleDUij1rWBLNTsrYFUl6S8r zQFG4MUGk2ylAAVUgAaU4AR+qH4rsO4mAj8RTFjFSXntpSaJzBj7VnpB2Hnor3oJ97LG8IRRGF3k b4VZuIXBC10GN4ZjOGq7lRu/dXu5F9nGlcqIclvpFfWA1nQs0HIZ8SDhtV7z0X2RtjnZsondUmpz 8KWuk6YslSq9idGstn/tMjvV5TzNk0mllJJ2t4HTBQXgTjElV5zYFqqGN9SKFz9dim7dxtWcS56O p2Rh8mRDeI+bJ9Gq8l1QOJAZT4VduJBZGIZlOJHblIZzSK4sb7KUxXsXQol7/u5ngziEhLYDHSu5 OJdfYA98ehaJ/7FynRg6R1dUXxQG9+yS6rVcVXc3Xfdg5cWHDvjF3FM919NdpBSVg7eq3taXrQq5 HEuOBYs/7Zj8OLMz05iPmXl6QceH9yl7CXCMJOhTwzeUgTj1hvaDsqqTPVnQWPlSqS4imhZ56eV+ ZbCK1UZgUfeKgTRe2QWCf4gJ0rMJmiAKmoCM2+UEdDWNGZM+fdW4sAr3kHdMNa6O/U4LX7IzSRZ6 m/mhZQZqkUyaM9R6RLlgfhOdW8ia1hdgQjWc9xFT5VdTdY9+eRl2XkWiZTnEqNdTJ/l14SU9KXY9 czle0JjfwI1XNrGgze/U/pBZoZeX49DPoSG6qFtGpbeLom/YolN5YDKaIzjpHuEZYWR0afO1pKuu UD1RmjpRnZmafdUlCnLrCaYACjoSwnwLqoUYg3cC4+jYrO7W/IoVeIjaqO0aYpBau5SaKfHmomtm jab1lyZrqg+mqpX2sFvwlIG3BEetq72amgl7XXSACiZbB6RgX+7nJArard+6XgKv4wCnru96tBeG gWp4Keeqr5s6hQD7KEOio7+a9rQZaLM6svtPbvCFiwtbq90lCnTACoSACvgls9tpq/KWuuyls4HM uUSbtJ37uU+bNld7t22bkptbYCYVd0R5baBYu6fbYHR746pAB2KUt6l6/m+WO+MCb+OUG7RD+4Oh O77l22kdWWUmxWMUJYdCxr4lBb/7m78jxb8DHMAhRcALnMAfZb4VfMEP94EoRWMWhWNW5goeHGMq nMLv28IzHMP/m8MH3MMPnMFFPL4d6GJG/MRRPMVVfMWdGozABFRgPMZlfMZpvMZt/MZxPMd1fMd5 /E/kqseBPMiFfMiJvMiN/MiRPMmVnFEw1CqW/MmhPMqlfMqpvMqt/Mp1nKA4YFy4vMu9/MvBPMzF fMzJvMzN/MzRnFi0HKxZvM3d/M3hfLS3fM3jvM7t/M7xnJnnvMkvYMvz/M8BPdAFnf323Fv7nM0H PdEVfdEZ3XkKHUBs/iLS/bzRKb3SLf3SE2fOIx0ucAInJh3TQT3URX3UGWbOO/0GbubTSX3VWb3V Xd3proDOX33Wab3WRf3Rl1LVbX3Xeb3X8RzXUx3RfX3Yib3YixrYA0TXjX3Zmb3ZHxrZ40LZnX3a qb3aDRTa30LarX3bub3bQw7ba0LbvX3cyb3c9wncnVzYzX3d2b3dEQfdD93d5X3e6Z1x4F3c6z3f 9X3fwybW+Rzf+T3gBX7g/+Xe1Z3gET7hEd7gFb7hHf7hA9HfDR3gIb7iLX7eGf7iNX7j6d3gsfzj QT7kRX7kSb7kTT7IJd6GDz3NWb7lXf7lYT7mZX7mab7mbV5WCOrU/nV+53m+533+54E+6IV+6Im+ 6I3+6JE+6ZV+6Zm+6Z3+6aE+6qV+6qm+6q3+6rE+67V+67m+673+68E+7J++ybOi7M3+7K2iKtB+ 7dm+7d3+7eE+7uV+7um+7u3+7vE+7/V+7/m+7/3+7wE/8AV/8Am/8A3/8BE/8RV/8Rm/8R2f8W8i 71/O7iP/8S3/8jE/8zV/8zm/8z3/80E/9EV/9Em/9E1f7yv/7ie/7lP/9F3/9WE/9mV/9mm/9m3/ 9nE/93Uf7Vuf9Qtj04E/+IX/Joa/+I3/+JE/+ZV/+Zm/+Z3/+aE/+qV/+qm/+q3/+rE/+7V/+7m/ +73/+8E//MV/LfzJv/zN//zRf/hRffrXP/3d//3hP/7lf/7pv/7t//7xP//1f//5v//9//4DAgA7 - ------_=_NextPart_001_01C6B712.BEB27DEC Content-Type: image/gif; name="zoom1.gif" Content-Transfer-Encoding: base64 Content-Description: zoom1.gif Content-Disposition: attachment; filename="zoom1.gif" R0lGODdh/QPRAvcAAAAAAAAA/wBVgACAAACqgAD/AAD//yQkJCZMvysAAC1b5S3lWzv6NED/z0lJ SUxMTFD/v1FR+1UAAFVVAFVVgFWqgFWq/1clO2D/r2ZmZmiCim1tbXp0gn8AAH9/f4mg5Y8AAJKS kpmZmZ8AAKct5aoAAKpVAKpVgKqqgKqqqqqq/63Y5q8AALJNerKysre/Jrflwbflwr8AAMaM58vB 2MzMzM8AANytwtzlLd7e3t//MOPlt+UtLeWxLeW3t+bm/+eMjOe1Ke//IPP///oTQP8AAP8A//8w AP9AAP9QAP9VgP9gAP9wAP+AAP+PAP+fAP+qAP+qgP+vAP+/AP/PAP/fAP//AP///wAZAP8nAABw AAsDAACuAACyAADDAABOAFIIAOMGAABHAAE4ABMAAOwAAAAJAAC+AAHLACNgABcAGSAAFAAAqCAA RgAACBcAAGgACAAAGQEATQMA8AAZGQAnRk5wCAAEAACAGQACJ2s0cAACAgA0TAAAAgQjTBggABgA ACcAAFgAAADLAAUAAP8DMQAOgwAwfL4ZGcwUJziocAUZAAZGAKAIABUAGTQASIDoRAEAADUEABQZ AABoAL4AAMwAAAQAAL6+vszLygAgIL4rK8tdXPzMzAAZAgAnFQVwkAAE/wCAEQAAfSNuiAAAvgAA ygEAMAAALQAAYhTgwCUAALgAA7QAAL4AMcwAg7AAfPMAMRUAAHQAAIAAMwAATQAA5AIAANEABAMA Bf0AYAACAAE5AgAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACwAAAAA/QPRAgAI/gBvCBxI sKDBgwgTKlzIsKHDhxAjSpxIsaLFixgzatzIsaPHjyBDihxJsqTJkyhTqlzJsqXCCy5jypxJs6bN mzhz6tzJs6fPn0Btwrw4tIXRo0iTKm0Bc6nTp1CjSp1KtarVq1izat3KtavXr2DDih1LtqzZs2jT ql3Ltq3bt3Djym269ULRujfk6t3Lt6/fv4ADCx5MuLDhw4gTK/ZKV6tdgVwbL55MubLly5gza97M ubPnz0slY32c16jd06hTq76hurXr17Bjy55Nu7bt27hz697Nu7fv38CDCx9OvLjx48iTK1/OvLnz 59CjN2eN+yhp60Gza9/Ovbv37+DD/osfT758Set3mZauKhq0+/fw48ufT7++/fuD20fVD7XxddPr UcUffgQWaOCBCCao4IIMhjWgUw+Gtt5/6l0VYYMYZqjhhhx26OGHZF2YlIhI+ZceidiBqOKKLM53 xRVbvdjijDTGhyKARy2UomknBjjVjTUGKWRhLxbJV5EwupVkC0gayeSSR8loFJRDVmmlYUA25mOJ OzLVo4VbXinmmEciJWVcUFKZlppUnhnlkmqSKeeca2W5XpimdUmhlgp1SeefgJblplJOvpkkjE4W OuWgiT6l6JNpPknooFMu1SaTZmIaZaCcdsrYlgRJmONTF+j5pVF4MuWnp6y2KlWc/ptWKuubix4K Z6ya4prUrbPCeWims+oqLKKZRurqsciOCGqeSmlJqqmQ4Yjqs9Ima+2xsOYq66W6/gosm9zuKq62 3gZrrrnEbmrstex22l5ppTZ7J7UV8hhtvS1Q59qq7fY7Z7bhrksuusIuWrC2mhrbJJuWjuutwP5G LOa7p4k6LYTQTpgqhBtL7PGMAI/bK7DbioxwrHFyq3BUKTtc8sEfx8yinaNiXO2eHcsr8841Ukrw tyQnbPLJQhPqMsosN0zymRDz7HSHNF8cWsb87pfz01grGHDB5Q488tFf58qr2EsrHbTYY2eb9doI Rp0vvSbe6zbbdDPY5K5uFipw/pp5983o33xT+ijXQ+Oqdt2I0+e2vq1RXa2AVycuOdaHQ+UzVZdP rvl7c/844ansRb756BJXTvrpNHYuVdwag4n667DHLvuCqluNHuMw4Ya7dLz37vvvwAcv/PDEF2/8 8cgnr/zyzOd+2+6y4W7QwtRXb/312Gev/fbcd+/99+CHL/745Jdv/vnop6/++uy37/778Mcv//z0 12///fjn/35BJ+rv//8ADKAAB0jAAhrwgAhMoAIXyMAGOlB/HPic3F5Egwpa8IIYzKAGN8jBDnrw gyAMoQhHSMISmvCEKEyhClfIwha68IUwjKEMZ0jDGtrwhjjMoQ53yMMe+vCH/iLkQARvNyEKAvGI SEyiEpfIxCY68YlQjKIUp0jFKlrxijwUogSLeAUsevGLYAyjGMdIxjKa8YxoTKMaZ6hFIlrHiGuM oxznSMc62vGOeMyjHvcIwjbai4t8DKQgB0nIQhrykIhMJBn96KUJdlGRkIykJCdJyUpa8pJrZOSe 4IjJTnryk6AMpShH6UlN9u+RGQSAKlepShq08oSsfKUFW/lKWYYwlii0JQhjucpbAgCWv3RlMFn5 QV26UJbGrGAyScnMZjrzmdA8oikducFkLnOXwdSgLq+pzWxys4Pf5GA4MTjObipzmNn0YDlLiMx0 XnCd0YynPOdJz3pWcJqA/jTnLH9Zy176MpX8DKgwy2lNgRJTmAhFKDwTes529rOh7hQnOiGqUG8K dKATTShBLUrRijLUniANqUhHWkl8vhGV5EwnLS+60ZQOVKMRlWg3cVlRg650hO08J0w9+lFw6tSV NfVoLx/60J7KVKdEDehFScrUpjr1qXM0qWk4+U5i3rSoxcRlUn+KTYr6s6o7xWpXf3pToS70qjZF 6kSLilYR8pKlaTUqVOdK17ralYlSZQpV9wnWlR40qy7l6TptWVaIwnWnbuWoYJf6VcC2dauLVatc q8lRXkb2rpjNrGY3K8O8XmCvXDUrO90J2cGqlLFrTW1oAUvWwxLWtK0N/qtqZTtZffKUr2LlrG53 y9veWtCzoP1oW2sbWNyWlZb/lGxsh3rYxPI1sseNKWWXq1rmcjW36qxsdQvr2+5697tOBS5KwWrc jmLzoMMlLkCR+1qlNhee7bUoWxvL2tLO9q+ITS5Mt7pQ8Pr3vwC+pHgP2V96FjjACE6wggc5YEMe WJ4PXrCEJ0xhNDY4pTRV4Vula8INhzPChqWvDD3M4Rx6GJwlrrCKV8ziMV64xTCOsYxnXM8X0/jG OM6xjiNp4x37+MdADnIaeyzkIhv5yEhWIpGTzOQmO/nJKlwylKdM5SpPWbxCzLKWt8zlLnv5y2AO s5jHTOYym/nMaE6z/prXzOY2u/nNcI6znOdM5zrb+c54zrOe98znPvv5z4AOtKDRvMU3DvrQiE60 ohfN6EY7+tGQjrSkJ03pSlv60oMu9FQfyOlOe/rToA61qEdN6lKb+tSohp+m9ZrqVrv61bCOtaxn Teta2/rW3hviH09q5V77+tdHHnD6KjhsGhRbg8VONvqIvewNKvt8zIa2s5v9bPNxsNrluza1ty3t Y2cQ2+TTdre5bW1gx1DY5+NAtMunbmOnW9zsXjf52o0+er972uazd77lPb52I/ve9ea3+Pz9bYDf +9/7dnfCA67weOPb4QxHOMQNnnBzvxDdKxQiszNub45r2+PuBnlw/keo8ZBHmeAYHHkQO37yjbd8 2iIfrwlLrvIQlvzfMQc5zl9e8z6yPIU0l3kJb17wnL9850D/OQqDrnOLtxDj46MB03kudBISPeVV J7nSTzj1pLvc6zDXZio32PW32nzrM0f5BXsugra3XYNd56Db357BuG9w7iKAu9otSEEE+P3vgA88 AvS+ccEb/vCDv/rauxh1pje+44/feOTDDlDy1l3p0i2x4vnOePFJHfKed3zo9+70peu6kYCkIACu QGIPd9Hu3/4g7FMue9KbHMUcnr3V0T503u/+42InJ9l/vnokjVP3Wgf+3UXQJLr/1vcVbHvz835B 5NNA+khy/j1t/t/3BzwAAR8Iv/g/gIDvf5/wIUfAKr0P/vGHv/yrVH/iud/F1bd+w6/vuP3vz8v8 b3z//MdK/hdyABiAqjSASFd5tRV3xsRNm/d/rOd6+Pd5EGiAAkiBBBiBFrh6GFh6LIRxBWiAAxhc 1MNBuleCw6d8rIVB1nd2X2d6L8h19CdO72SCxNck9ld7MYhhmjeDd/cisQSE1Qd9zKeBB8h6Q7iD FlSEQYiEz/dxiGd46Nd3UViFHVh0IchKGeB6GKh6RiiCXVh/XxiAIyiGG3iAV4h1uNeDMfhaHvSA GUhiY4iGTJeF/FeGrjSH94eAHnhyq/ZZnZeHZ8iBcdd5q6SB/kVyeTsIhAd4iEIHhz0nfOnUgj4X g953iZiYiSwIfSungsI3Szb4dQDIekLYQchXfKWIfgl4Qcx3hEXSiE94exjUiqjIiE4Yhj/oiraY TZDYReX3ADwQjMI4jMTIA0mYft53hvP3cXYIABlQA1v4VnjYjK03jXpYjbhIjUF4gb24hqaIdtjl Tt2ojXpojYNojmfIh31oen9IQe54jXKIi2u3jY6oiLLIiIfYhJvoiWO1fUoYYpblj7L4ADuwAw+Q AgiZkAhJkAZ5jD2HJClIeQp4TWWHg/hlj1QVhBmQAV+4jxK5hKSIj0XSigIJWq1oPSQpj7MYktST kt34izzg/n084AM0WZM+EJM46ZC+mIwbuIwwh49aWANCGY1BiIsimY+NmJSECHpIaYeIaJRjuDBN qY6L94nmNYUyl1sAgAOTOINA2X8TKHrnCJW8xABmGY9wuI4r146BqI1cWIgFiIhoqJOLR4/1eIyr mFVdqYQBGIuc9AA0YJAKqZAECQCA6ZdC5wKK6QILo5gemZc1CFSheHuo2IipiJXvtJi1CISaiZdF l0EnKZIv4pK8d5LSSJpKGJot6YQvKZPF+JrBSJe/qIxpWJVZ+IxCOZT9l43w+Jb615th+ZsCGJWk eIi1yXnvxJWxFZF7JVZbKY4zGIILMJ1KWZR1+IXTuQDY/nidZQkADICWtqeWZ8eWcZiOKimXxTeV qNR1Ediexrd/KNWNFrSR9JkBLiiLGHV/iHlBDHmQg7mQBXmYJSlzjOkCHEk9jhmLkAmKksmcqLSZ V6AAEjqhCoCZs6SZb9WZCvqZrMiSiDiSSAh7oSmNV0CSIuqhq/lLrQmM3pedLvqiLoqLVWiF4/iF uJmbusmNwmme3MmjO0qOTymfs6Sc2LWfAMlLyvmYWIidAKCdzYiOq6SdTuqbFchK3+mdVyqNxyme a+lGm1aeUephU4qHxDaco2icRmpsjpiUIumZalhBGYADcjqn9VmnHslJG5imNNCf/wmgDamn0Veg B1qi/m53BQm6pfj5iWxImbuoAE0ioRiJUgCwmJRaqYq5lx95fcWJfyaKdiNamcXXqTtompwaojMI ky3aojCwqqwKAwvwAK+6ALgIm7RKjIjqhUGJozhKlEtZpRsIpRaIjtf4nr2aqc+pnwNqQXKqSnPa rMsqTDiwoWpYgFOqneXIm6xUreDpq6qUpVm6m2nJpW94epsUiEBJnW+FrsVqRF+InvZHikZqhLuY nmh6q6gUp86ar3Jqn3QJkPf5lwHapynQn/3KiiIgqIQ6d4spkAt6lZE6SwvjqEjiqBVasK5UqRQ6 oZfqplW5ktRYoqY6qiHpikcoqolKqqcZsjCHqrAK/qMuO52zun7AaJM1GZOGCQA8gLP26m6rdKO6 Co28iodHqZTuKrRFK43GKZbAaZ0+SANcyU/5yqzNmqYG+KwMW3TnGqbXKpZhqkpTqqVc261WSqXi mnbkiate26TpqrZ0yHLySo/FuZ5ui5RxS7TS2rE0gK/66qz8SrUXOa4vyKd9SrCAen0isACMiT1X +6ZHNZlwlJ6kSLESGqEvUrHJeqGUKrFFIqEugKl5ibL9Z7J79amvGKoqO7qbmrIqeqoymaqZ+Lot Oqu1Ors7u38+q6vPGLTY6qPcCoY9iqVW+q06qnxb+bT8l6bLWrx7+7Qci5zUGqWly7TcWq3RO7xg /uqdwRucZWu2Xspq5amt2dq1ZPq2TfiucutyRTu0HLi4eIuvdfq+dqqSfwu4AxmwgxugdFmnboe4 lkqp/CqkM7Wojxuxj0qhejqpmfuoEeq5HAqSteiIo3m6MvepTSi6E4yiC2OyOMeyrwq7ryurTJez g2iMNapKt5ubuSuvu/urKzwALuzCb/XCA4COV1rDYou9Sdu00KqvUjunfnu8SjqtGqiuV7AAqZvD vkrEThqVK1y9wovE27t7Z2uGbFvFaXvFRgs+yep5Owun+/oCYBzGYizG/0t8yvR79WuQHky4yTqo V5ABCtu/ilnG/PhcFHmD7qm5kyuxlsuAGBuh/ntcuc2bmiwJwaiZqJrqlIdskhgMosG0ojEJq2uc iSDccSJ8hiQcnayXuz+bwm36u8G6wj+wSqPMS6W8rlTsrTj8ncJLlcjJg62HvE+7vMk7yGD6tXUr vRkYPrvLet+pgU/ctlEsxd0LiCEHhF9bxclsrfJIvmYakvGqnkV7t6+ctziQAWOczWHct2V3xsmX xgUZzuIczgIqj24Mx20nx3PMvtU8kbmHxxNrPX2MeX88sQbMzoQMqqi4yEKnmhnMmqXZyBH8yKzL opI8yZdYyRt3yRuYyR8HhLjps55sfEY7lRYtzMesgad8yqx0yhXdnav0xK78gj3srCUdrZeb/p8k ZrU7y4jq+q5GDK5M2aS47LVMzLVXcJbAHMwjPczDN8WCuMxdq7XNLIBw+67RzKbvarf4fHtxis3a nM3cbMbebJV3ilIMGaCvS84Fe87prM50nKkWBKk0MKEOuk+xJLmUu8cHXM+ATLkRSs18OZpFOJIp qZLvRNfTd4uzF6p1rde8WNCR3MEIDauyO7u0WrsRGNFDCY3Ug8qCyLtgutFv5dErvIdQjHTFa4Cy fNLNGlAordhXPJxFLNNVmsyoiNrCeqVGyNOI6tOXB9Srh9pqS9tGXNRGTbRIfbny2p5HeIFNDUcb GdVSbbGKhdYPa0FZbZBqfIlcraf6e7Bg/h3cVUfWFWTWyb1BmhuxbZ3A1TPP/AifCYt9mNqc7ol3 lwl74o3et7izHFzYsct0LzvfLyraJjyUE42DwOq7P0rZpgzFaGumdlmsSMe8yjunJ/3DKx1RJWzF SPnS6EjbUYrLTQyEwFy9PQ3bmyjbpZ2uEk6marqm05ymH8qmTynXTg3VxL3Nxg3LGZXSeyrOBJmJ zw3jeUufXy3HYQ2Z2H3dZW25hXtBFLvWfNzdi6nWSI7iGdmu73nV5MTkpevked2EUW7LVIgAgw3f hi3fMrsAMfDlYB4DXxur9n3f+a3fl83fvurfsWTZoPyV9JrZDaxMxktiheucSarkZvjh/tmaneYo 4bHkojRcvjltt+Gq4dsH1C8C6B9+nnSbviRu4qXbnlZ+rytOxlL+XOqkp8s945hY43gNUfAbvwDs 42Ut5NcN5KGOQdv9qEaumK0+sXo+5Q6VTAyogWht65iH64alig2c5fCt0CFH38Qu7Dj3lfR5PZCt vkeL0e9IytD+385uiPkolab9kc+ZX9ltx6SV5y3NenwOtkwJ6Nqb0Tjcf748iq+N6IlezO8Y2SwM l85M6Rb7lUwexO076vCb6ZZnW3aX1bAL6pSog5lasUBuuapufUg+5OCNn2m91m8d19QNsSL2jaLI 6//6oBhfiRIJ7IUt7BRE7iRm7EtK/qLWA9luWe4BzuYdDeBU3JTbKpHZru38HmJjV+nwjrTi3rtk iK3BnJQMEKThye6fx+FjaXftOpzbbu/6iPNUJ1FaBZ07CN81n3b82ONjbepBPtbyvPXX3fUTD+9o bEQAOPaPVPbfnIDCSNgIDfJdJPJiWuZU/tj73fN1WAB4j/erlPd8r/fTnvPVWe6reFoOyHvza484 R44q//KhfJ0/D8FmaZYZTvQguLTXzknUPop7BXvM/og6LIP/aFsWC/qIjMYNm0H37PU/nrGpr/Cs 3/qaXPH0G+C956u1L9ZsP8luTwNwv2EkL8RySPdpbvc/2vjFr+ZinesWX/rl1OD4/rf4gE/8PH+H 687uUDd6/4iCFlpwTTKZp5/xbnXWT390c+5B1q364E/+0yr7s19/7L/8qvf+3l/+vK/lu9/76frt vCx6+w96/S95AHFF4ECCBQ3S4MCBxkKGDAU2hLgQAICIEBMufFhRo8aLGh8aBBnyCkKFND6KRPmw 48mUIkluhBlT5kyaNW3exJlT506eOhPeaBH0woUbQIWepAHgykSlTJdOfNoU6kuTI2FahbkSq0eZ HStm5Km1J1WwO8X29BqxrM+Sa3OeDVvyq9WJbDHSpfi2LV67HrcyXBBY8GDCC8iOLJxYseG0EB9K hRxVstPDSSdDdZp5qtjImjtv/t5r2fPlyFTnjoVrVq7akZ9dS678ejRlzqRt0149Vvdu3r19/wY+ 82fQFkOLEr+AFG3o5XdR527oFmfqvtJvUte70bpN7NOZx9X+N3vV586b+y1P/vzp89trdr/+XXX4 9O5pNo4u3rt58Or7BwcwQAEHJLC34YQiyqjiTkqoQQcfhBDCuyKksEKtLMTwwfAy5HCvDjOc8EML QxSRwg1LNLEqFFMUaMUIT3TRQRJjvJDGBmG0cUYacdxRRRtr/FHHGHkc0scg/foRyByNXLJAJ5+E MkoBDywuQeQ+SnKlLNvaUrsuTfryijC//GrMLDEiUy0zk0TzTI/WPLJMN8Wc/hPOJtWs00052QQz Tz6lBDRQQQfNigMFjTvUPkIXZbRRRx+FNFJJJ6W0UksvxTRTTaOkEtEr6dwyVFFHJbVUU09FNVVV V2W1VVdfhTVWWWeltVZbb8V11EOtPCpXX38FNlhhhyW2WGOPRTZZZZdlNthdjzuqJWmnpbZaa6/F Nlttt+W2W2+/BTdcccclt1xzz0U3XXXXZbddd9+FN1552X020XnvxTdfffflt19//wU4YIEHJrhg gw/+1lDkeF3wihUehjhiiSemuGKLL8Y4Y4035rhjjz8GOWSRRya5ZJNPRjlllVdmuWWXX4Y5Zpln prlmm2/GOWeOO2U4OYd1/gY6aKGHJrpoo49GOmmll2a6aaefhtpmnqFtOGqrr8Y6a6235rprr78G O2yxW57a3rHPRjtttddmu22334Yb6AAfvinisj+NO2+99+a7b7//BjxwkmkYonDDD0d8IcQXP5wG uhmH3HGI745WcMsvxzxzzTfnvPOVCYcccQ0UD/3w0R8v3fDTJ1cYQap93riIIjRmoPbaRb5dYttz 97x3338HPnjhewcdYw1GL/5hpph6+HjJk7fYebtbr/J1gTKWXfaMeefd4+4f/n548ccnv3zzz28a +oqdh375iZpfPfn3IX5fetbrxfvi7GdfIXuKw1/B7QRoO/AxIIAGPGAC/hWIPgY20IEPhGAEN6Y+ irGvcPSLGADg97wLKk+DK5if/R5GuapVbH/a6x8KdYfAFe4OgQM0IAwT6EIJ1tCGN8RhDgVHwYlZ cAggdB8IN4i6DDJviPdbmPV+NjEUqvBiudvdAVkIsQEWUIHfA6AOtbhFLnbRi0jjocR8CMTlCXEF 9qPg/I44Qup5qnIRO+EJU2ix7lWRilGEYgxfOMUFftGPfwRkIAU5sjBGbIwf9OAH0djBRCJShCsg IezgGMc40nGKdryiHq2Yx0wO0pOfBGUov1hIiB0yg4aMHyPnF8LVsRF/b5zkw/znxIpxT5NWnGEV OclJUfbSl78E5vDk/hfEDRYPkWY84jCLeMZWQrKNPbsexPyXQjnSsoUx7CMB8bhHXEYxmN8EZzjF qbdhlrGYF3TfMRf5w4s9MpLRlOUktbe/lWVxnPfEZz71GTbQHc+f//wn6QA60HUSdKCSc2USzRY0 e+7ToQ+FaESHRjiDHpSiFQ3o4zCaUSS6bqFAa6hERTpSkpZ0cACim02m98oSmtSlL4VpTIX3ziXK 1KY3xWlO4UbTlG7Kpz8FalCFOlSiFtWoR0VqUpXK0xUo1alPhWpUpTpVqlbVqlfFKklYKsl0dtWr XwVrWMU6VrKW1axnRWta1bpWtrbVrW+Fa1zlOle61tWud8VrXvW6/le+9tWvfwVsYAUL14R6NH+D RWxiFbtYxjbWsY+FbGQlO1nKVtayl8XsXj1Q2OotNLOfBW1oRTta0pbWtKdFbWpVu1q4emCzztxq NFk7W9rW1ra3xW1udbtb3vb2q67lrBtL6FviFte4x0VucpW7XOZ+FriwVehhmztd6lbXutfFbna1 a9rnMnW73wVveMU7XvKWV7vdfaYSG2le9rbXve+Fb3zl21f0xvZn88VvfvW7X/72F7z1je4b/Ttg AhfYwAdG8GUBbFgBJ9jBD4ZwhCU84bAuuLPSpXCGNbxhDndYvBYWLlc9PGISl9jEJ2YtiKF5XxS3 2MVeLchao+IU/oK82MYoVrF6yXhjHpd4xgJR64wx02MijzjHni1ykjUsZLYymclKhrKDj4zhKFcZ wU/GzFJqnGUgN2UgStmylcU84Ck3eMxn7u+Puwxk2zyFzW52X5fRPGf5lnm4dMazfJ085OWRxsue AXSeBT1eO4t40Icmr5yH7OYw/9g1gUZ0pK9baNlK2tLbVfOiR8PozqwZy5cG9XEpzeJQl3q6NYYz mLes5TVrJsymhnVxR73eWNca07bGtXVnveNc95q6n/Z1sHe7a2EXe7nANnayU/xa7yrb2c+GtpKJ HW1qV9vaRmZ2epF8bW5329sGnva3xT3uXCtaKsiGcVfRLets/tuX1uSGd7wRzWoaQ1rd9uZzc8Mt b373m86phkzAv+rnOFd33/5GeMKTfJs+NzzObH44wZV7cIVX3OIolgzA853ugF9m3b2l+MVFPvIl N3zPYdW4uT/O25CT3OUvv7LJ04lujUOl1dNtOcx1vnP9qvnkYE25q6mbc54X3ejsFfKTHT1zLUcc 36Jud4DvfHSqV928yF75xh2O86gzeOpWB3vYs4v1s34668Pu+oXNLHa2t525Zk+r0nWd9hBX2u13 x7vFiZ53vved23v3e+AFn2zAwxXug0d84nFM9xW/u66HV3zkJa/hwrf1y0w/++Q1v/k6M17HfIU8 50U/+v1W/t6toSd96lXfXtNbfuCrh33sCe35becV9apmNMJ0v3ve9973vwd+8IU/fHB1uPVNfj3H My975id7+f49voy3LnCHP7/51++19fkbfb/WHPvfj/bHk47WpJtbrCvXPmK531fvg9/9zh/rz8mq 6DebNevpF+z6Qa/19/c/2OuWv/hbOuoDOvsTLf3bq/bzvwW0tfHLjIy7vC+DuwE0u8vzslYziKeb LATUKwVkwA8stZNLNU8DM5t7PQqEMU4rwXMbQQ2ULA60Pf4DwRm8NBHUtAecvurbOixbOo8TOhmk LBjEKw+kwSIctD27OUcbwIiTM4nLN4CDQj7DP8ASwrsi/kIjxMI5UzqP4zQSLMB6Mz8TXEEfvEEC rKwqtKsrzMI1tLIt3LSmUzUzDDQLVDcLJMNzc8HIQsPHA0I29MMoA8D4g6wppELao7JB7MM/VEQi C8Tzwz06BLoMPL0DNMS1Q0Q5XMRMvDHxc0THIsRCDK7G47XHUkNNNEUT+8TOC8XPm6xSPMVX7LBU jK89pCtXhMVbpDBZhC9anCtbxMVffDBdfC9elCtfBMZjNDBhdC9ijCtjRMZnTDPjq8Svu0RlhMZr DC9rZC9mNLxExMZv3C9tNC9ufCtnBMdzRDppXMXaq0Z0dEf/EsfyIsdJxMR3tMd0XB4j0Md95Md+ 9Md//gTIgBTIgSTIgjTIg0TI35pGQ4uspxDIytrHiTAAREPIhKSsiASAiTy0ijzIi8RIjdyweCSv eXS9jDSAk0TJk+TIlWTJfURJI5hIkCwyAzDIlLTJm8TJnGzJnazIl4xJJVPJgszJoSTKl+TJoyRI n8xIDhPJ2VvHQyRFb7QsI1jKmaRJqswuqpRJHrvK7dJKplRH6PI6hmxH08LKrXyxrvRKiSQymgSv swzJsGw2yTLHx9JHk+RKrPyuuzzJvAwvvkRLCGvKD1tIu2tIqZxKtrwxvXxLxbQxxtxLx5ywwQwv kkS+esSsswzMEnNL8dJMG+vMv5TIzUwwyvyvwiS1/sPEzMvSS9IcMciMTMlEMdhcS9kUTLnUNqj0 RMSESKZwTQ+jTe1qzcckr+HMRdx0t1HczdVkzdF0seCszb5sMegUTuecTOSUOrKMSuZMTNskMerM St98TvMyTgkzze+yTOnjzt70Tg8LzfEqTxN7T88Uz+vksPQMMt5kz6o8MfAMz/bsMP/Ervi8zftE TcdjrLqErNb8zQwT0Oti0Nlkrwg1T+wcS8Msy9NizAalsAe1rg2VUPJcHg6FRwtVO2rczvO8KwIF Tg/90PossbucUBgt0A3Dz7jTz/0k0Qhz0RcFUA3r0epi0dI00bpLzQzVUBp9TfcaUg4LUupq0gNT /tHzOlDlbCwFXVAlBU4m1dIA5dIfLTBOFEdILD9gW76mRLYbJb8cvcgRjdEnnS4Q/U44bS45rdEv tD16E0MTDEM2pcf5Ays1LTs/lSwZ5c8tZdIo7dD3MtQdDUdB7MBN28Hk6z4DVMintMQUXS1FnTA6 jdMuBVL44tQBc8AsczVILDhWa8I4/Aw4lMITbEIMTMJY7dM4VEJWlUNBtdQptatR5VFRBVUHBVYw JdWZK0M9rdX6G8MW1DQUTMFjXdY/M9Wni8JozdUqpSwszVJi/VVGDdZF9VZujcaCw8NpBcKga1Uc 7DhqPdXpa7oyRdXZKNcyTCddLStttctv7dRh/j1ULw3XfiXSVI3CJSTXHvzBC7RDdn1CiMPBUkU5 dV3Xa8VUFF1OXq0rX4UwT61TfZUwjWUujOUvN3xVL7w3a+XCFVxYlDVWaCVBZEVZyLNDFfw0ewXU 9ZxKkEUwmBRVnD0wnWVUnsUvkW3VeH1DhsPVjSPaV7U5OIvApaWxWn3ZyUhYr6JZSLXYi+XYB/PZ f3XUnu3aAc3akIXU1dJGgsXE9OTBPsXXfBXXBPPYjW3bnJUvoJ2vRhw4SUxAvH3YINPbJ1xZqsXW BKxDlT3Y1KJbAnvbjw1bt53bxe25mlUtZVQ5cr1UsTxR7azFMHTCtXWswx2wxF0uz/Uv0FUu/tF9 r6udu4nFXD78W7mz2e4EWGGNL9PlL9JNLtptL9Q1uMCN1NYtWd2VK9zVL9tFLuHNL+I9LuMtL+Dl OtXFUCssWQLk3MaiUCdtXOu03tn1za/VsyIVxf3z3aedXsay0w1DXuMq31DVXscNWu9lxd59OMKl V9RKX9nl19jd1/WN2/Y1UOc9Uuh9Q+VjrfrtVO6FUDd1UgP20f2tW/dlR03dVAQ2XwUWUgkGUgqG UguOuf61XCNF0MUaX/JlX8TF4Axm4M8t4U894fhiXn3jXdVsYbhS3tlNYbjFXx6tYcVdYfgSsqL0 4R8G4iAW4iEm4iImzartxBh+qxm+X37N/uHrheInHi8lnrgXRlLD1eD8heIb1lr8ImACo+LkQuK9 DWO2+uKM9eIs7tg0HmEWdmDdvFJCbdM27q/zTV417tYtluJsfONMrdjZOuMunq9AdjA7Rl88LlYO nksYBmRELmRDLi5CzllIJi5JflRFzk0/juPXhV0udts9vl1H/mQ23mH3KmOo898PVqwQXixLNrCt 1V9PzllQLl5RFltMTs5slePJcuUCg+X7pWXyDOZDpuPT7WOK3eRTVqteJmFSlmWvdeZhHrtjXt0E 3eVCtWVoHuRsfmVprmRuzi9lZrdUtlJr5uT9fOZXPl5wRtx1LmZTpubn/eMBZufPdedS/r5nPQ7G eP7feY7gd87nWPZm+ozmfcbl7JTnZG7keq7jfB5o0SxoBxNn4hrjL5xotGLmOqbkSAboQd7ob8Zn fLRRK4Zgeu5oGh7ek0bpe37o6rpokCNpf/7nkF5pUm5pr7xp3mJi8HpplotphV5omhbVnN6tnRbm lBbqRONnVU4sVm5lht6vX9Zfoh5Qqs4to761g77QfgZqk05qJrVq3MLq4gzr2xrradbqy01oc+7p ssro2o1qlW7iKDbokSZnXT5ndC5rFWZp9e1riV7qcgbha8Zmuf5Slt5rG7bpxC6uttatik4+xx6r t45rpP7q9vpokL5sng5svJZssaJs/suOaC0ebSnt7FYk7MgK7YDWZ3B1aMBOaw8W7FVO7W3dbBEV bcYO3cq+7ay26w7+XtTO6znu7eLk7XS259yG7d9e5CvGYsPG7OPW7dKV7uWmvJ9ma9pabWfeZuie UeUOWObOZGTO7qBG7tGtbtcu7WQ8bbqsbbYtbvhMb9Lu7vjGrs++LcgWYPM+b7gGb/pu7Q0W71wW bvwGK8ic7lr+7zVecPaO7eB27+Hm5e3eYo/2btw+3rO+LgOvLf3+3dqi8Fi2afv9awG/7rsucBCH ai9OcK9ucfR9cdXScOvicNry8JWtca8KcUaN8efu76jucfq9cN8+ceB+X0bW7hUf/uQgT1L7fksm N8sh164cXzYUj3AqT6cdB2v//vHhhfLSmnGXbm8kN+8vv2ozH60wF040Fy01P7Uxd24f73LuHnEA r282J1s4L2mvnvP6tmw8t63M5mgnp3E9l+mZ7vMKr3MG521ATy0sV60bL1gVl3KIbnT1LnHTfvAj j3Mhr/TG5HJHT/JQt+4Mk3QdHHVCr05St3O6Du8ib+40NL9XQ/Uyb/WpxvRF1/QBR2iuLkY9FUPN fW/4TnQR13U0ZnUTN3XsbkZAM9t55XNR5/NMR/ZLf/Vlt3IAjlj+c+qn/vTYtHZG//NSpzCS9DOS rfVov3VgXvd/LfblNfRenEOG/p30VH93d39tcc/3XYf18a7mZj/XPmtae5d2RN/3am9wMI73X1fZ m8PxQP/22kx2hB93ZS93Zm/GVT3aek/1gpdx9Fb1/5z4MF34wZZw4vZ4Oa/4PA53B+f1rWZqxOp2 b7/3w255QR55hd/0Bz70mU55T895xm3okG8uSE+tUy9cF293rl36w/750DJ61EL6+UX0pyctqT72 UR76mhevqD+tqYd2dc9Yq+fliM9Ksi9srufjnYfj8iZ4HAZ5tS8vrL/za7/4bO90oJd7+Y57tG/z 5N57Isd2I+f5rrZ1il95nA/6EmV7TXb7w1f8mxf6rff7y/J67sL4ph52Yq/8/s8SdGIOfIKmfLuf MLCfecXScgxffHXue9KXMNPffPju/Mz6fGKefdpv59BH65dXa183+cufCDevYMC//eYkfosv/cyX +djvXLM/4ONH/MTXed6Xbc82a+df4NGPfmpPZOqHcDLveJZf/dxvfX4f/FjveZ8Xf8nvWfIvftX0 fk7f86B+f3Qef8DXfpfvdwK/8usneigFCAMABhIsaPAgwoQKFzJs6PAhRIdGCAqMaPEixowaNyI0 UpEjyJAiRx6cOPAjyZQqV0a8wvIlzJgRPXhYsYIDhxstdl64cEMnzytXbMrc6BLA0aJKDZoEgHIp 1KgWPUqtarVg06dXt16l/sr1a9GsYMcqTUr2rFWaNnECbdHz5063QomiLXjUbF2QYvPyTdm0L+CI ewMTzvi3MOKOFBMzXoi3MeSHam/mjPu27YW5KwDfjQxxsOfQAA6LDgy6NGTSqPmeXh34sWvRk9la 9olZM+eBsGO3jk1YtW+yvYP3BU786/DjY3crRzy7Mk/blnH37dw8eXPh2c9i347c+9ju4KMyH5/3 OWbpQYdurq47u3jzUo3LD7u4vnb8VePrf1m+/1fo1QbXenTxZd11JwH43YJQmaRVgw5GuNSDE0L1 n4VRCRgdgXKxlxtS21WYYVT0kRjSiCcqZaKKG6XY4koYwgjThm6p56GB/nkhqNyLM7LEoo9TKRjk S0AS+VCPR3Iko5Ij1XjZdB+6FyJ8QzZJkpFXKpSkli52qRGXX0LEpJgZPXljZlIe+F6VTpWp15tC uhknmHR+ZqWdDpGZp0NndphmjnXteFyYfC6UJZ2FGpoQonEquiibkG7k521q6hgpj3hKeuimis3Z KaegYqWpqFSWOlNNlKX3J3Vrmprpp6cyJetopNLa6JuPQrqnrJRGGShagxKn66a45mrrqcaWSayh vJ7qa4HtuepsY8xCqqyY1i6K7Zfa2kmtqNDiKO2lrxKKbKncduktn+pqyW6c4IIqLqDkCorpuU5B mC6tterbL0HuXvng/r6bytspva2We3Bh/G3br8OGCtxkxHQyLGnClt5r7rD3ATyxkhXnCfKRIr95 MaQZA3uWsMGZnCjEHsd8q8yloryoyvYGi2/H6IJKMpEvOzpzrDYD3GeqtHFY6cpkteyb0MfS7HOn QAcZdZc3G5oziFqzVrOsVvuIdbZEFyyp13lyPWXadZHdrdlH+xs22KC2Tefa03oHL8xTF02332fv KjdDeS+8N9XFxn202DO+3eTdcRq+ceTcJS5p4zA+/u7islZe5uQ7c9yz4IoHLnfmLW5+5Odihs4y z6Sj3jnRydbdaetfvu507C5fvqgBqau4upLB02404QrtvlzvUP9u/qjxpwMcPeB/25288klDZyOr GrMk1GPgK/S089aLSr3tz/OJPr/qW4x9QsuPJBRSZiW1G/m8uW+n8MPf/vPH/oc2+CFEfiK5n10I gr/m6c98ADxe+qTnOQIexIAhQaACM4iQ/LmGb1KToN+qV7pmUdAgFgQJBhVIv4RwcDUeXBbj9te3 mY2QT7nr0gmXpMFIrVA34hud7xxYtRgK0XQ07NcNtZRDo+zwVbBpIWpeWLYAFhFzRKxhnpJ4pSVq hH49rF8TNajFrshwaFTEYruuiMQSFoSLXezhXX54ECiWRopwOyMRj0irMSrJjeRhYAfL+MGpoXFk atwjGwnixwsB/tKFgoQhHqmoxwkmEgCLXAodRWPHdR2ydoArZLwqaUntrYppOoMdEMsHyhkSMo+t RGQlL1mWRkbxkVOcZAg/ucZYknJApuwa4qp4rU7mMn2rLBMfjyTLomRSk//ypDGPCUkaSjNrolym TJoZmk0OLI/VvCMEcXfNXi7tV6fkXSpVKUkQRpCd1+PlWrYHpWgBM5jf5KQk78m5fMIykdiMiTY9 w02KeXOdIuwnG/8Jk4BGZqBHYl8E9dkkiLZPmFkcZzxLac56isiWWqKoqIgXJJA+0KLfwqiqfLlR toHHoUGbnUe7WVBK+pOc3PslS+0JzYjutKISZR1KlXbTlepN/qfF5OlRfYrQEirUP7SspUn5B9Oo stKd4oRnSstJz5x2lKpm5GdSQyrARSWTSFwEnxydms4G/rRkU23rS2d6qrIGKYdf9OFCn1rHmBJU ru20qsGCKk80KWx8jlErXUvE15C9tadiXSyREjujpn5Pr8706iABa8RwBharQp3nuDjaJrherbFh LSlpZyRZGJ3wrrNcayAxO03Oblazg/PsYLvXtDmmNZuW3SZk4wrW6tH2tjXNqEq32hLXxui3Ag1u af1a0eKSVbAaVa5FmJsShqYGumMjnEujS0xRrbZFbkQrM53bUO86Drzs1Zx7Zful8qrIrr0FqHq7 K19wRpK4/rgkr3WTG9qGaBe/sHXkfvE53scu+KrHzepQsUu5lr5XdfFNbXthiuEW0fdErT1sZQ8M 1Q0Pj8TfTfDATJxhFWeowySyL2/zKuK9VphEXpFu1Vhs4Rq3OMBaHfBD0Frg+eW3WmNtl479x2ML 3Xi4AMbtdYF8OAqjOGRJPpFINXdlGx/ZkFAWcL1EO1r/UjeN8a2yW7/84zBztatbBlD/Moxm4eK4 thSkbHNnTOM39yfO8F3yhPy84zmLN6E2BS2bi2rU6Tq5pHW2opojLOUJU5nP+hG0kgl9YtMy+s6H Jqz3UOnimIT3z5xm8KOHGWlEF1Z0o4ZJqQed6oed2dL4/sF0Hz+t23MyT8+XtXV9cI1lQEdI2FzW tJwNjdw1t1rU44l1pjVM5v8OcdWg3i1YuKtfYMvH2BmC9rCTB+5jP/iz1+Z1totsZGSbWtp/7S+q maprnCrazdN+ZaepbWcC4lkl2l43t83jbSYTu0EDD3TBF3Rw1s6bqFNe9M8CrvCE91nicKb4pS3+ 4oZL2NXPxvitNX5pkAdb5LcmebdNPqF+b1fdjBk3k1XebZQLXOYCp/mzbb4glm/QtUIOn8sTA/NA 67zSySo6xHPsY0kn2j8uGTLQfQ1cdpcYe0MvNtLtna6s44fnBknhHDcYdMRc3eBcTxDVsXx2WK1d k20f/o/XE9i7BUr9uTjf29uDmPZv5718e4/50lkd6pbPnYVjb1iXHdX3Bv6d6FZPfK4Wn5247/CJ vF3hq4sE+WVJHsGNx/rj7y6iziuH8jwUu+Hrvl7Rw4f0NP682UMPe4W7njimByNzmfPvl2/+lrXO d5kTlfkI3b5+KSzP7oXee/6eet/Bd9TwG1T8Lh7+N8tX8O/jPeuRRX/nHJ+0x6k8+4vLvvamgV+W sdx9AE0/I8lX/vj7TMCykz/05geMEdbfn/Zj5P1kZz3a2R/w6du26J9+8N9F+B/ixV/IzR8AEsr9 TV0E5oVHGGDXfV/TUZrRRZwDMmDJdeAEuo0BWGB9/iBgdlWf9XlgyoFgSIXgtrUgCcqHCbYECp6f CtYcC3Ig+j3gsIxg4J2bmI2ZDgrgEIobD7qMD1rbrgUh2rkgdzgh791gzuVgjsWgeczgmNQg/h0h 1EAh/HkhWDTZhcHgDy5hm2md0u2gFLYUGC5gG3JFBZYhvT1c0l3LG9rgHXZFHhYHF/JGEpZbbs2h Btbhtuzh16wh3lFhsfyhskGY4GHbVyhgChrifFCi2/RhB1kiWtBfxlkh3GFgs6GTJ3oJJkaRJlpO KdbRKeYHIrbeKHoHFgaZFvJhKrpdB7bidaxieFwfxTCivC0b04Vir72iYfCild2iLpJaMjIILvKI /i96GjA+IrpF4iweYjNCIDIWYfYtIjFOHigO3jDeXC1u0zLCoTGWTDluRfrFXDc2RyzqSTVS4DkG TTqS0TgKVD1axToSXTuW3jdCIldIog1eYw9mYxqW3xA9I7/94zQGZDxe4j2unhoSpN4h5CKq3rww JBPCCkX6nUU6X6NJjED043G8I4E9JETmo1+UECcGG0tGZLWMpBw63CASopkpoqrhpEhiJMJo5Bmi IaTppMS8ZEdmIk9uikkyhEDioaMRIUjCWyEeJcb4ZL3ZpJcJ5U2qoUqOBFWQpO1RJR1apVRRUEvO HFnC5MvJpBIKYvh9XFG60FbuB1oKXVzOx1yS/p1aAmKUZWBbbiDm1KVivaUpEiVgckRXzmTHOZs4 FqaLMOaK3GXDOKZ9CKYqSmXKgGVNAmVUniVl2iJnSiZGHOZa0mRfiqXiEeZBaqXSeWVwJCWIsSaS QOZvgCapyaZp0Cas2Sb+5WUjmpsZVmVXdSY+EqVwNhRuap5usgZv/qIjAuFPtklxpsZx/sg8Os50 rsQ+0p5l4gxmlmZwXmdDiKERJicFgudKkqcIbufWdKdiumV0xiRxmuehyCdXVqeFLSc0NudvhuV3 XiRnvmdaxqcV4edCRqNzAid00iejKCiK2KfqMCicoKflECj8uKZhqecCAihdCuhfcujDUCj2/lho 6sFmbGooXrJRWbIhikqodoBo8ogo6pGoRLCocEBohNooVuAoKeroaFSEjK4GjIYdhrqhf35mkWLl aQ6pnQTp16FkSh6panYoatqhk+IQe4qiS5poZK6ols4ml/KoV/woajCp3IlpqPBoj34plDrlTiop 3lxpOJolmorneM4pmoYmjYahjyIm+LWnW9qpmkqpkVKpm0oOnJLEffmQ5RUqLQLqlBLqoG6mmcrG oR7Q00UdxywlUwoqkiZppLbppIbG7YHdWmnqFnbpbQYqpHYq51WpElXqBYXRpS5qqHoKqhbHnV5E dlYcl95qebrqFsEqCslqHAlprZaEg4ab/ocOZa/qaJjyKV/6m6zKnfGZKi36qjw2a1D+p7Pu6Wgm JuGZi/0Y68lhK0SqKrOi68h4q16CmTDOz6Uaa9QdK7Ka6xNWUoq2Hr7mKRyya28GImnGCBypUO4B a350677aa40mLMIyKugI61VYa6Ou6qeuK8MSKr02BpmKUbk2rLryT67iqcKGh78yp2+ypZ/+KcWy areErK7yqzqWbH6ebMBiaZZ67KMi2cVKKrS+KzU67CHibMWC7M6Cas+CY7oBbbYKLcuui8vKibOG 0cwCLLjGqZyubJS26cfOUMYyxsaySdcGDMzqYdHqbCLlK480Rdg6B8RahcQGLdayqcWe/u3Y7sdH rG1hfC2V4O2ufiDd1m0lJuzI9qvUFqh+oqzNmuXgEu7fLm7MCq6N3hjeEobevm22Oi7ZNi6O0ulH Eq3B5pqB7mdm+uXc/u3mPi3Uau3kBkblfu4uYq4+oq5gAG6JyO6dwG7guq5ZtW1VWO7SbqbpAu/W tqru1hXvSoXvPqnWDi/xBq/ZKq2Vhi7iWu3VLm/Oeq7zlu7qAkbrQq/yGpLtlmjk4u7qRe7dHi1A bkXybiLtUgj5vmAahe+Mvi+FnO+39mniVi/4ihLadoz8hmf7roj9tiuzIe3PTm7/+s7/MkQCO88C n6nqom9Dqm/xmiP9PuYDb0kA20cG/jPKBsuE5ErwRmrm0HSwp4yvCder+RZuhR7vH3kv+35wbqbw rMiw5tHwqNjwjwzwv+6lzzokDKPiBYMwDufwECujKM0NhIbw/UZr/orjEcNaEYutDmPnFA9E305h BU+WCzNSELPiEl+xEj+v5j7v9vZF9yJwsoIe/65x7LVxFasEExNwMBowEK9uAxtlEucxXCaxv4Qx C4doF2PSFqtjHPuFGP8xGWdvovCwyVIt/lKv/jayH/PxYO7xIWOJI0+tD9sxBX/xwS4y8zptJWcy V26y4dJs1SYtHpuySHBu0x4jJkcxchayeQ3ya7UyLe9wKe+yFffyElNrD7urJ0es/i3royvrBSxn raMss9wuy1+cMV+ksfz58komsiU7EzYns2GihDSfBy6nFyi/LoNOxDZbM5ag88Ri7zgbr/TWrCRD sYKacy+rc4Oesz3rhTeL8HOK3zzn87n+Mz7P8z438Q9/si4DtJcMtFQxNCUH8ouGs2+1MzMStB+P 8UPPskKDSUHTsTSOsGnKMjCzMxxbNEQTDjVXs0mPdEbP8kpTNBe/8yofMPm9dEmTdNk2L0wznExH MivXNE4zsk7fdEt/c12k9MhttGEkMhZzM0dftCIXNT8jqHvSpzNPpFUzNUZHnjA/cienrzHvtCE7 dWhqdRbr60WfdS52NScTM1i7/u0xIzNZ66pZu3HGQbVaOyNbpzIkO3E8y3NLw7FS0zVe23UDnrTc IHW5DrZgXHXndotjjydjf0aTGTVaFN99CVmMTtxkx6ZWRzUMfXY2d1dHD3MBv/UbgdFelylndzYA i7Zh3xxsz/WdlLZXu/UE6xC+/Mf6Xq550nNh07ZnQ/VWw41tt/Vp5zYTYYpmb3b9/bZrV/SxzHZ0 c8px8/VXKzf1zR2ttvZvf3ZxkzJx5zUSNqlBF/Nyp5L9/NAZk3cXEnd4vwt4u7cfmrdHH6haqbdz V3N1b8l8x7YWB3d/L6h9m3Ydo7b7xasK4RW51t+Al8R/A3gijndBgKcYWvZZ/mD2wFbriCocfffx eH/4JeO1iFfmagtyT/v1T3v3UNezhYN3fPdigd92coO0P7e4Rr84fMe4SMf1xqX4QYe1NJe4Z1K4 cIcnjBM5Oc44ch+4diOvj8v1kWtwkle4ce/4X0wncCP20Sh2Uk+5B1e5hCeImIO5YjwFhpOFl9+a kpM2lre5kSU5nPMemk81fy62lj/4WOt5U8M4j5dWnZ83gr/wN8/5hu74n4+Nnye6dQrpfYuudy42 n0f2f076ome5eJ94RAM5evdulEu5pSP63IQ6omO6fDu6gX90P2cpqZf6mGOjqBv6ljI5duO2jVd1 pmP5qxdkrO96edN6C3P6/qB7sWXL+hYuelObudgiO6MPm1ak+VisOX/T5pa7urL3uagn+4NX+6ev nEQbGIaP9rFne7JTO58ziLk/u52PrkqnGLmXu7u/u7jjKuo9+vSuOMENOKXntKK/O7z3OJcDjLQD NcD3ur4zOxWDJp1CO1gMPMHTo7//O8RH/LynJ6rTuJPf+sk55r5jMscj/Kx8fOrZOzzju415RGF2 /B6j/NWAPFOwfL/Xe6rjN7sXmxGgvAHkPJypxsK1y83nPNDvvK1GfMD8PNCf4s0PPbCj+OGWPE2P zc1HvdRPPdVXvdVfPdZnvdZvfdXnfNQffc9vC9ePPdmXvdmXvdcbvdcT/j2jnL3bvz3cj33a4zxJ MXyAfLuM2X10hT3b/9+o9/2J0Yfeb4XDAz6sJb3hBw3iJz7UC/66RzrjH37kXw3fTz5rOL6gPzmh Wz7nd77ne8fgX0Xhfz7pl77pgwjJz/Qdnz7rt77ro1Lq+/TTvz7t177ty1jsq/js3z7v977vn2Dm a/zvDz/x137opwXeI1bxLz/z9/7xV8XoN7/0T3/kP79URD/1Z7/2v7v1a0jyh1j3b7/4j3+55H6Q w7VYk7/6r39kPX7Ksj/8xz/2hP9SYL/83z/+V1fwr3r+97//vw9AABA4kGBBgwcRJlS4kGFDhw8h NvTgYcUKDhxutNB4/uHCjYwbr1ypGJFkSYJXBKI0uZJlS5cvYcaUOZNmTZs3cebUuZNnT58/gQad qVJoUaMSKVrEqLEFR49ML4QceVShSqJUsWbVupVrV69fwYYVO5asyatl0a6cWPHix6Yd3UYVuSKs 1bR38ebVu5dvX79/Acc8G5jvWqVx4UKVShesXcKPIUeWPJlyZct3B18Wa7gt1MQg59ZNqZl0adOn UadWzTfzaqycl2783HSxaACtXefWvZt3b9+pcf/uCRvxU9BTvzoWvpx5c+fPoQMNHp0mcc/GaYdu PJp6d+/fwYdfPl08S+uysctF7lV5effv4ceXP5b8fIfn36avvf22/n3//wEMUMCV6hvQIPycimu/ 5Lgz0MEHIYzwuwIjRHA29RjLKaTWcGtPwg9BDFFE0iiE0EL9tMMppNsGWxEhD0eMUcYZaSSrxAdP VDDFm4hqscMGawxSyCGJ5OlGB3NUbEebeiwIpR/7K1LKKams8qEjDUzyuAx5HOisJxOC0coxySyT RiwH1DK79Zj08iQgnYTTzDnprHNANAVUE0OdmvRywy83TOnPQQkt1NBDEU1U0UUZbdTRRyGNVNJJ Ka3U0ksxzVTTTTnt1NNPQQ1V1FFJLXXRIfVckMcnM8PTzldhjVXW1VJdkkkXo5Rz1l157dVXy2pl 89dhiS3WWOiC/uWyMVOZbdbZZ6GNVtppqa3W2muxzVbbTFFNqjP0dBSWve5cNa1cc6k7l0Ry0+2W rdjyC1dZBtuNTt117a03332DTNZGdvmF7t7LBrasYIP1rdFf+gAWuOHnDqYsYokTpnFhsSaeLOPI Nua44uY6hixkwkb+7mLbAnau5MBW/qtlv16G+WMZT+YvZZAfVnlm5mJmzd3DrpP32KGJLtpo02o+ WumlmW56M2/hTVBJcZ2u2uqrsbYp6ay57trrrxHaGuyxyS5babHNTlvttWVFm+234Y67SLeFumpQ 4XzsmWE///zNblx9+xtw3QLlG+/B9aYP18KFpDsou3V+U9fV/qDsrc9cLfdTUN76XHHw3C7HfLcm Q7cY6uKE1opx0S0HPHHFOQx8cTdbD/31rjqnnXPaVx/dzdJndFw6vl1n8XasIF+d1eONajXO3tFt MPnPS7P9d+qrl/565pGXfHvQ4xwN+gpPD3rqealqtUcxs9ecRfe5r/sgQCfXTHAn2bcf/vXrJ1h3 /ll3mi/hr3/+8977Amii8oHrfLh70f9cAzkIFpBi4fNe/OQnvcth8HEn8dwEUSPBXAEvegccIeUs qD0RCe8nsVOhakR4QgpqzCAt0l0Ib7hBFM4PhCV8IQnxlUIZ4tCEQwQRC30CwNnNsIK80yFwahhF JkoGgEPk/uDwNoc5IFbGRwg0og9NuEUuCvGFR1xgvBrIFcGJ8IpYJN4FYUjGL/qwbz0UoAcHOEWS 1dF4cAQOH0UnRon17W5l/BAS5ZZIRS4yT2eU2pYYGUlJTjJAiKTkJTGZSd1YUpOd9OQnJcNJUI6S lKVEiyhNmUpVrtIoqGTlK2EZy5m4UpZXq1wtcUkVWuayaDHkIS+BGZRdBtNYvpQiMZGpk2Em01eF y1sRmRnNlyxTmrsq3ROrmc2WUFObsLqmDbsZTpJwU5x0IiHj2ljOSZJTnWW6ph3bGU+CsFOeVXLR M29Yz3rSU59jmk46+yk3fgaUSv8kqD4HelAp3VKh6kxo/kMhGtGffQuNkJToRTHaq4dmlKMdTZMj L6Qqj46UpHMDKYqoVlKVrtSM70JdGlkaU5mSz6Xms+hMcZrT/2xUpz316WV4+lOhDjUwQSXqUZF6 F6MmlalN9cpSnRpVqRZlYROx6lWxmlWtbpWrXfXqV8EaVrGOlaxlNetZ0ZpWta6VrW1161vhGle5 zpWudbXrXfGaV73ula999etfu1pTBkISsIU17GERm1jFLpaxjXXsYyEbWclOlrKVxatgK7qmimyW s5317GdBG1rRjpa0pTXtaVGbWtWulrWtde1rYRtb2c6WtrW17W1xm1vd7pa3vfXtb4EbXOEOl7in pegj/jVbXOUul7nNde5zoRtd6U6XutW17nWxm13tAve4Ib3CRcAbXvGOl7zlNe950Zte9a6Xve11 73vhG1/5zpe+9bXvffGbX/3ul7/99e9/ARxgAQ+YwAU28IERnOD3vhQkCnbwgyEcYQlPmMIVtvCF MZxhDW+Ywx32sIIZnJ1tjZjEJTbxiVGcYhWvmMUtdvGLYYziEMslxjW28Y1xnGMd75jHPfbxj4E8 qKh5lwZFNvKRkZxkJS+ZyU128pOhHGUpT5nKVbbylbGcZS1vmctd9vKXwRxmMY+ZzGU285nRnGY1 r5nNbXbzm6XcXRTR4FpFjlaRKWxna+m5Wnymlp+n/gVoaQn6znTeM5wRnWhFL5rRjXb0o8MsZx0Z mlocIDSpLE2DCV/h0s7KtLU+Xa1QV7rTzRr1tE4trUxDmtWtdvWrYR1rWTdZ0koytKIvouc251rT q4ZzSHSdaF4Du8kwcfKwOa1kg1h52UtGNq5DDe1gI/rZRrbCtZFcBG0XYcvbPrIVeD1rcY+b3OU2 97njPOQ5E5va0WYzr8NNA58cmdjshnO1mQyAGuyb3/3297/5DYBju/vIgqqjlA1eOCXj+94Eb/i0 5d2TIzP82lY4sreXHACNb3zjS942t40cb3SPnOQlN/nJ1Vxr0Nxa2A5PM7x9bTxQCYTeybZ3zZNt /maGK7sGLOn5wCEub0QJ/MkyJxTRJ+5yN++cyxugMsON7imah5zgFb+4tpXMca1vXckY7zXKwR52 sb+5PEmfMbBvvnSle5kgSIZ5wa8A8H4LpOf6HkjP5f7vqQc77YvL+ZiZjmS7R11RdEe6sx1O+Ls5 WeZ4RInb1/7uyGPZASaQwZShHve8153zd9f35gN+eHxj28heP7LWk8z1bGNc5GN3/ethr+XDxx7M olf3pNO+68nLvgcA6EHvk47nmGse9MUH/d5ZfvMVGZlFSf67lgNf8LpDyvBAZ7nQPXe3QOUbkAm3 fdCn3HbBN4Tq4M9yBQ7ABBOcIN0Qv43x4Z93/uRX2+qlx/rpO/5kjif5/q2n/f8BMACLbPYEUPbM zqay4/qcRfjMb8sEovd+D/gY8OuYb2VqLugeD+7+LveuLPqYb/qcqZDq6Odozd36KOoMjgCxD5CO rvyuj/lUUPAKTgYZzwU50MpCQAA6QAegAAlQIMoyjyeCj+XqjwZMjwb2D8pQ7+q4zf8K8Amh0ORi cADFLwqV7QAHKwHZ7QoyoAu98AvBMAzFcAzBMNk8EMsG4vd8r/eI7u0q8PPib/NQYt8+TyUu8AWX D8lEIOfykMvOUN5AkFUaL/tUggSZrNq8qPE0R9kKJeG2bwLTTuCQb/wK7vCmkPls8PnOTwI6/kAI pmD9gDDxUCIHSLEUTfEUUREV5xDvasAOM7HISK/I7s/IkhDJYjH1NI4Ji8AJrbAXfTHWVHAhfnEA sTCz5EIBvXBDMkAZmTEkltEZm5ELozEZIVETZY8g1HAgJjDe+iMOQW8O407fXJHvno8LjQzY9lDP LrHK/nDwCFEQCakQ1/HZElERF1EDj07x2lDpkG4S5Y0Y/zEgBTLfXpHLKoACDsAEpkAHksAGQtH9 RpEUI2AiKTICUvEiSREc8W4cKRDYitAIQY4Wc/HbKq4kLQ7J8s/+eHEYWbIlE40AEQIIZNIfodD2 zo7TtjAZoXEnpZEnn7EngfInqbEjrREN/gEAB7BRDV2QG1dx30jgKaESKp0yKklgKp8STGjnDpUv AypwQwxtHdlx9wDREUMwHw0R8XStHruvDweQ+qoxyWYP+fpxLrWxBt9yy3LwAEDABKiACkzABJQA yoKwFC3SFAsTI1VRi+Yv2m7R9FISFk0yMlEyAFZvJV3yMjETzeLSIIIgCABAJoGAJiuxLsGS3GwS AY8xJ8lwNVlzNc1QLMNPEg9iCJkSDmuAKqPSKqXyNqFyebBSKzXx77yPAA/lIV+Q58iy8OzO+oDN 6LjDKvpG8AwlOTMQ36pwNPcuOzHRLokSLwlgAw6gAxRSB5zABkxAMEURAAjzFA8TMU3R/jejZAg9 8iRlMSSLLCVLUsnyUyQpUyV9LTMBNEDLzBILojM78zNBUzQjji7D7jSzMDX5sDUldEK78DUbsMpo 7iiR8jopsDZx098+lDdzsxXfjw45st400Tn741AyQBs96Mnase5M4iwXLtr0UR+ls44cY/G6kwZh cAYDkuj6segKEss24CAdQALWbwqmoAlMgAXQEyLVkyLZsyKt9Eot8kkCjiOfrTHtEwn7EzLpUz9v cSRLzzIFNE3VFENhcCAM9EARdCZp8joV9Nwc1BjRLkIpdE/J0EKP88oyFAcE9Sj90Q3bEgBClN9C NES11ESRD0WVLVeE7iC6kPtgVCzt/q7ndLQs53A5SzAt3VID8QdxqpMffxQuCRRIi61Iq2wDKKAC BAA8QeAAlkAKqMAJkAAUmVM4IzIH1NM93bNRNXUxdc1L8S9MP3LJytRMjRBN1/RZoXXJ6PJN4TRO Q9MfObROze1OkQtCz1EnnzFcd1Jce5JczbVC7zLLAnVQN7RGJ/BQvVEOS3RYDw9SpZXemi/8ipJV kZMVSRQOC3HfOpVGk4wepxNHRdXxCChdMbFOLdFHCZJhp6wCCIACHOBiE0A8TQAKpiAKTMA8L1VK S/FXgRUjhTU+X9FYRZIk7e/jSHJMmXUX/zNaabZm4RIGqdUzBwI0rxUm61JVC6JN/iVxQWWzaAn0 Z9uuNBGuGLs1T7+1Qst1XKU2aqk2XNG1R41S3gQVKdvVXSkQXvlNAQBObP+NbPvtZE/U5vb1HB8v JajsNj71TwUP7wCW7gTWbkmUbne1LfOxERlxjTwI6ZhOW6kQW4lUYqMMVi3WAcCzAyZgBJggCqTA CZLABI4gBPb2DUe2ZBETbYn11lT2PsOUBkjv41zW2mB2dL/WZlmXdYU0Z3V2ZxP0Zwt3CrOzaKmw dhe0cHM3d0lTaaOMW4lMNfm0eL/QT28QytaVaxXUUCc1bBXAbPcteqW3BqjX3zy3XtW26Hj1beM2 ecdSRh9Cb7832VCQeNiyK6Fz/lMzEGuZ7V658w+V7GId4ADs1347YC+Z4AkmdwlOoATYr3zhjmRJ lnMTk/hQ9i1DF0yR1QoGwj5nkXRj8TGdtXUtGDNfl1oNgmezlXZHU2hJk3d3d3eRttmAV3mZdnj1 VCin1lxbmCe58Go9kEN/VEOZ9xKdtxutV2yjF3p32Id7eHqzFziVtx/X9goPEVPpln3Xd2DnkeDs 8Y247x0J8fvkdmmReFUR18lCoH7vt34lAAQqzwScIAqeoAnMMwky91A3FyOJ4I3hGI7fc14TuDsX GEytrSDC1PSWdQgv+I/XNIOrdYPldBJpmGhBuAp/V0gz9HZn88uEd91WuBld/rhqX1gZZXjtHrkS tZZdtTWHV7GHg/iHR1mUzVYBhphtL7TYjhjzlDhT77Zu65Z8kxgilecRp3joIG+VD/dm4xc2jQwC KmCYk1QCwNhxZcAEmsAJoOAJ1C+ZMbeWX7A/2vgiiSAVr7kUU1mBxzSC8TiPCaI/+Th1/RiQzRlA M3ghZhdb57SEG3mRRdhFHdloT7iXe+0mkdF49XkZt9iROdmGCRUsQVnfSpmHT9mggRiV6ThteVla W7n9rvgDYflf+S1g89ZTpfnmFC99HfpQCFB+tdiXQxqkMcACKiAETnoD6rd+O8ABxPMEmMAJyrgJ lsAERiAwM5pXCRgxs/kU/ns6B7bZjrs5gh/TgQXCTCO4j13wnJn6MhkZAGYgqmOykH3WkEcYkeN5 6uDZnRmU7VJYkp/2Jy+5kisZk/nZfU/1qhd0awM6Sle3Gwv6h6cXoed6h4PaXtm0y2J08CCCltHy T8mScGEwH70WfIvNgwcSftEayRqgAhoApU0apVGapScABPbSBGL6CZygCU4gV88zpwc4B94YAOK4 tN8Ym+U4qOlvqCdTdUXX/lh2ZZe6qWn7F+kyqnF7BghinaW1hHs34oB7hOFZuOcyuBFbXb8a9yb5 T8h6rGE4hs9afrnak5V2oEd5rqv3evvteu96e5ntod0afDNVEZl4vNcY/juPu+iarWCB2aq3870j drGDuQIsAKUhAKVPGkk7IDwrDwT8V6bP+JlHIApAW3NJsYA5t4BVmzHvmIFbG7ZRF//KubYpvCaF NrdxW3bTu3Y3M4TF7yE4nBgPGbmpDp+Jd5/5FHnXNmgBciC61q1rs3qnd2xpnEQRmKEjmvHAO2Rz PHxluaLx1onPW1W7bArbcWjTOrgBcqR3z6TvG7JR2mIPgBM7YATGeJk12wnU7wSSucDZ+MANuJqB eqE/l9huESRxcetGN6nJebYr/M0DkC4HAsOl+jM3/P8iWbnDmrmnVlHIeiijT6u1U3chujYDDuBs 89D/rbsbOr6h75X9/tWiJd28BVixHbDSI/W9hbTF4Vux5Rey87sCwFMCKnuMTWAJllmmo4AJkuAI ntTLJ7WNETwVf1XBydyK2S0WT/dYa7E+Y/u13RzOhR32jnbO6XzE4zy5bY14+Zxq/byFAV2Tu3q4 C3344HCi6dBfsz3RGb3HWdkPIZ0k/LqwVxy9hbHTyT3TgTatWZzJGzqyh5kCEFICqNwE9lIJlLmM N9tJP1ZX2VtkwVwggFXgbf3GyzzZktWbn8zripCCZ3bYIb5Bx68gjr2exy7Pl32FUXxPVRxVp73d XfldJ5UgxNfzDKLkV1RyiBgNdxzW+5W8OZXSXd6XN9pvE/uv2e2Q/tt90G9epEGaBugbpafcpU3A AUbgL5U51aUABVSABpTgBCwP53V6ZEtijiVIPv/uzBW+ydicPh0+4sH+4j2eIDJcQWH37NG+yHh2 7dm+7WWyyOg87uU+qlG4xFHTae1s44u34ye+TbG6AzPN0BXd3xI927F3EB/VuwHV4v+9x8cbyH/8 bse98Q17cwrPRYwz99w7SDl9yeP754/MpVv6sjtb/fS96Y0MBXI1mnd5mntVPQXePQne6gOFS6uu CE0XysZZwic87H1/5IIxIZwM7YmfWtXe7ZGf7eF+7pkft+te+EycD5sFcRliywZ67hA9+w+/FTcy 8Rudlcsx5B2f/m4hv/wlH6OlXnlDNbz3leeV/P3BUnCBOckq7+j/sqZjWqaXrLPT3cBNcdYBIofA gQAGGrwCoMaVGgkRAqABkQYHDhCvXIkI0YoVjEU6esQI0mMRjBo3RgwQAOREkCxbunwJM6bMmTRr 2ryJM6fOnTx7+vwJ9OVDoQCKDg2KNGnNoxI53GgB9cKFG0+jWqRxVenNlVgvsjRalIZRoFy5QgSA sIbatWzbunWblqFahxizZuVZ1KJepjK53nWZMDDYwYSLyuXL0q9XmWj1On6816bimGH5MrXMOOJk nCdMmJDB5ASTJk2iNFHx8kSUxBS7YkRb0KDs2bQPJpSrMKzm/tYWU5I0yVFkcOG/MaL0DbGIWa3M mzt/Dj269OnMEVO/npTpxKotpFKF2v3qX+wQN1Mv2/osQsjs27Nv7Fh3Ra/jdw7eynsx4MPx4TuM f1hM5jHm3mPWwTQgUV+NBVJhhe02n06iPeFEhRbKFAJrEUYEW4EevgeZfE3NhxwNJQE3nEjE/Ybi cRwtR16MMs5IY402+nTgjTq2pJ1T4HnH3QXi6RdjgtGh95pDDi7J5Fsi2kUkeUY2eNhaDllp2FyB MSRgfjY15p9FYOI05XVlyhTFFDo8MQUUUTyh04CwMUlnYU72SGKJJ7ak4kcslWQcSiHBuGOhhh6K aKI45aio/o09BjlVkEPWeGZzSHJYZ6aa1kVflNhVKlaVWt6WG6lpBdblhkuJGZ+YOYF6pJc66UAF rTpIsZOcmu7KJEaKuRjRiSjWBGigISmXXqPKLstss9jxCm200k5L7YO7QfqdVRfV96ms57W2XLXR cqqqjKCS+la6bKGKoLdLLRmnu0XKa1MUOlghBBU86Srurr7md5yeexJb7EmCBkeoswovzHDDDjO8 3Y+R/jgpjbAqdemMUFJKb4P9MjqiaxZ3bCbJNFlRhQ49XfzcZsCyqFFMwoL0cnIdJfxwzjrvzHPP GPsY1cTadjVR0UYfjXTSSi+N9HxMPw310+Vx8GHVVnvo/nTUWm+ddNZcf72112CPzbTYZJ99tNlo r6322me37fbYPs9Nd912390UtpJuG3ffFfUtt0RXD064Xn8DzjZWiCd+xeJoH+544I1HLjnllVv+ Nd6ab8555ztGHHS24Xnqeemmn4566qqvznrrmoPendCjY0577bbfjnvuuu/Oe+++/w588MIPT3zx xh+PPOJ6U5x8884/D3300k9PffXWX4999tpPv3xU238Pfvjij09++eafj3766ivdfXdUFw5//PLP T3/99t+Pf/76789///7/D8AACnCABCygAQ+IwAQqcIEM7F/7LkA110lwghSsoAUviMEMto5qD4yg Bj8I/sIQinCEJCyhCWnCQYmJDoKkO6ELXwjDGMpwhjS0UQpDFyQP1nCHPOyhD38IxBneMHY3kIoR dRjEJCpxiUxsohNzxkEjAokqVEHiE6+IxSxqcYtczNUVqEgV2bGwi2QsoxnPiMYeDhFIP7JiGt8I xzjKcY6cW6MY3UjHPOpxj3zsI6W+qMIcttCPhCykIQ+JyJfYcYV4TKQjHwnJSJ5xkYKUpCUviclM BpGSbRykJj8JylCKknWc9J4nR4nKVKpylQ4rpftOycpYynKWtJQSIHHYyVrqcpe87CXGbknESvpy mMQspjF9BUw2mvKYzGymM1fpyjE+c5rUrOYjo9lI/mtqc5vcNCM2YdnNcIpznGpM5h3BSc50qnOd Ifzm+t4Jz3jKc570rKc974lPwJmTkQ3spz//CdCACnSgBC2oQQ+K0IQqdKEMJegDwQjRiEp0ohSt qEUvitGManSjHO2oRz8K0pCKdKQkLalJT4rSlKp0pSxtqUtfCtOYynSmNK2pTW9a0kCCZ6c87elO p+LToAp1qEQtqlGPitSkKnWpTG2qU58K1ahKdapUrapVr4rVrGp1q1ztqle/CtawinWsZC0rUJ2q zKaetaxsbatb3wrXuMp1rnStq13vite86nWvfH3qWpmaVsByp6+ELaxhD4vYxCp2sYxtrGMfC1mf YP51qUCSomUvi9mpZHaznO2sZz8L2tCKdrSkLa1pT4va1Kp2taxtrWtfC9vYyna2tK2tbW+L29zq dre87a1vM1vE1Ab3t8QtrnGPi9zkKne5zG2uc58L3ehKd7rUbW5AAAA7 - ------_=_NextPart_001_01C6B712.BEB27DEC-- - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 ------------------------------ End of ibis-users V1 #84 ************************