From: owner-ibis-users@eda.org (ibis-users) To: ibis-users-digest@eda.org Subject: ibis-users V1 #230 Reply-To: Sender: owner-ibis-users@eda.org Errors-To: owner-ibis-users@eda.org Precedence: bulk ibis-users Friday, December 20 2013 Volume 01 : Number 230 ---------------------------------------------------------------------- Date: Fri, 13 Dec 2013 03:37:00 +0000 From: =?ks_c_5601-1987?B?U2FuZGVlcCBLdW1hcihTYW5kZWVwIEt1bWFyKS9FbmdpbmVlciBJ?= =?ks_c_5601-1987?B?ICi757/4KS9NU0kuRW5naW5lZXJpbmcvKMHWKbi4tbU=?= Subject: [IBIS-Users] Regarding IBIS Model - --_000_950d4063854a496da870b0c614bc3913HGMSICAS01HALLAGRP_ Content-Type: text/plain; charset="ks_c_5601-1987" Content-Transfer-Encoding: base64 SGkgLA0KDQpJIHdhbnQgdG8ga25vdyBpcyB0aGVyZSBhbnkgbWV0aG9kIHRv IGtub3cgdG8gY2hlY2sgd2hldGhlciBJQklTIG1vZGVsIGlzIHdvcmtpbmcg b3IgIG5vdCBleGNlcHQNCm1hbnVhbCBWZXJpZmljYXRpb24uDQoNClRoYW5r cyAmIFJlZ2FyZHMNClNhbmRlZXAgS3VtYXINCg0KCi0tIApUaGlzIG1lc3Nh Z2UgaGFzIGJlZW4gc2Nhbm5lZCBmb3IgdmlydXNlcyBhbmQKZGFuZ2Vyb3Vz IGNvbnRlbnQgYnkgTWFpbFNjYW5uZXIsIGFuZCBpcwpiZWxpZXZlZCB0byBi ZSBjbGVhbi4KCg== - --_000_950d4063854a496da870b0c614bc3913HGMSICAS01HALLAGRP_ Content-Type: text/html; charset="ks_c_5601-1987" Content-Transfer-Encoding: quoted-printable

Hi ,

 

I want to know is there any met= hod to know to check whether IBIS model is working or  not except

manual Verification.=

 

Thanks & Regards=

Sandeep Kumar=

 


--=20
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean. - --_000_950d4063854a496da870b0c614bc3913HGMSICAS01HALLAGRP_-- - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org |or ibis-request@eda-stds.org | |IBIS reflector archives exist under: | | http://www.eda-stds.org/ibis/email_archive/ Recent | http://www.eda-stds.org/ibis/users_archive/ Recent | http://www.eda-stds.org/ibis/email/ E-mail since 1993 ------------------------------ Date: Thu, 19 Dec 2013 20:34:04 +0000 From: "Muranyi, Arpad" Subject: [IBIS-Users] RE: Regarding IBIS Model - --_000_EB55FD6CF8C21444BE032D68DDA5FB99A59134E9NAMBX02mgcmento_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Sandeep, As far as I know, the only way you can check whether an IBIS model is working or not is by putting a test circuit together in your favorite EDA tool and run a few test simulations. Thanks, Arpad =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf = Of Sandeep Kumar(Sandeep Kumar)/Engineer I (??)/MSI.Engineering/(?)?? Sent: Thursday, December 12, 2013 9:37 PM To: ibis-users@eda.org Subject: [IBIS-Users] Regarding IBIS Model Hi , I want to know is there any method to know to check whether IBIS model is w= orking or not except manual Verification. Thanks & Regards Sandeep Kumar - -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. - --=20 This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. - --_000_EB55FD6CF8C21444BE032D68DDA5FB99A59134E9NAMBX02mgcmento_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

Sandeep,

 

As far as I know, the only way you can check

whether an IBIS model is working or not is by<= o:p>

putting a test circuit together in your favori= te

EDA tool and run a few test simulations.<= /o:p>

 

Thanks,

 

Arpad

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D

 

From: owner-ib= is-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf Of Sandeep Kumar(Sandeep Kumar)/Engineer I (??)/MSI.Engine= ering/(?)??
Sent: Thursday, December 12, 2013 9:37 PM
To: ibis-users@eda.org
Subject: [IBIS-Users] Regarding IBIS Model

 

Hi ,

 

I want to know is there any method to know to check = whether IBIS model is working or  not except

manual Verification.=

 

Thanks & Regards=

Sandeep Kumar=

 


- --
This message has been scanned for viruses and
dangerous content by MailScanne= r, and is
believed to be clean.


--=20
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean. - --_000_EB55FD6CF8C21444BE032D68DDA5FB99A59134E9NAMBX02mgcmento_-- - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org |or ibis-request@eda-stds.org | |IBIS reflector archives exist under: | | http://www.eda-stds.org/ibis/email_archive/ Recent | http://www.eda-stds.org/ibis/users_archive/ Recent | http://www.eda-stds.org/ibis/email/ E-mail since 1993 ------------------------------ Date: Sun, 8 Dec 2013 03:45:56 +0000 From: "Mirmak, Michael" Subject: [IBIS-Users] IBIS Summit at DesignCon 2014 - First Call for Participation and Presentations - --_000_942B8AE05D9831409A64517FFA4C46015DA35E8AFMSMSX106amrcor_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable The IBIS Open Forum is pleased to announce our IBIS Summit meeting at DesignCon 2014. The Summit will be held at the Santa Clara Convention Center in Santa Clara, California, on January 31, 2014. IBIS Summits are designed to enable face-to-face interactions between model users, model makers and tool developers in the IBIS community. Those interested in presenting at or in attending the event may register using the information below. The IBIS Open Forum is sponsoring the event, but we welcome additional sponsors to cover some of the meeting expenses, including the FREE lunch and refreshments. We look forward to seeing you in Santa Clara! Best Regards, Michael Mirmak Intel Corp. Chair, IBIS Open Forum - ----------------------------------------------------------------------- I B I S S U M M I T M E E T I N G FIRST CALL FOR PARTICIPATION & PRESENTATIONS - ----------------------------------------------------------------------- Time/Date: Friday, January 31, 2014 8:00 AM to 5:00 PM Location: Santa Clara Convention Center 5101 Great America Parkway, Santa Clara, California, USA Room: Mission City Ballroom M1 (look for signs) Santa Clara Convention Center Content: Presentations and Discussions Cost: FREE Sponsors: IBIS Open Forum, DesignCon We are seeking more co-sponsors. The benefits to sponsors inclu= de recognition at the meeting and acknowledgement in the Calls for Papers and meeting minutes. Your financial support strengthens the organization by allowing IBIS to focus resources on industry activities rather than raising money. You will receive generous thanks and public acknowledgement for your support. Please contact Lance Wang > for co-sponsorship information. DesignCon 2014 Conference: January 28 - 31, 2014 Santa Clara Convention Center Santa Clara, CA http://www.designcon.com/ Conference Schedule: http://www.designcon.com/santaclara/conference IBIS participants receive a 20% discount on registration, but only through = December 31! Please contact Lance Wang > to o= btain discounted registration information. BACKGROUND DesignCon is the premier annual Silicon Valley event for the electronic design automation (EDA) and semiconductor industry. Topics of current interest to the IBIS Open Forum are addressed at DesignCon. This meeting will be conducted as a formal IBIS meeting. Presentations are expected to be available in an electronic format, and minutes of the meeting will be issued. Any pending formal decisions (votes) will be announced at least two weeks prior to the meeting. CALL FOR PARTICIPANTS People involved in IBIS or related model development, EDA tool development, and digital circuit design are invited to participate in the Summit meeting. If you plan to participate, please register with the information below: Name: E-mail address: Company: Telephone: Send your registration information to Lance Wang . Registration deadline is Friday, January 24, 2014 to receive the free lunch. CALL FOR PRESENTATIONS We are seeking presentations from individuals who have experiences of interest to the IBIS modeling community. These can include, but are not limited to: Demonstrations of modeling techniques Explanations of behavioral algorithms Descriptions of difficulties encountered Model correlation Modeling building experiences Comparisons to other modeling methods New technologies for modeling buffers and components New technologies for modeling packaging and interconnects Algorithmic modeling topics Presentations may be addressed to any and all levels of IBIS experience, from beginner to expert. Presentation Format: Microsoft PowerPoint* or Adobe Acrobat* electronic formats are favored and will be pre-loaded on a Microsoft Windows*-based meeting laptop prior to the meeting. Materials will be projected but handouts or other physical media are welcome. Time: Usually 15-45 minutes (allow time for questions) Electronic Archival: Presentations will be archived under the IBIS Summit website. Final submission deadline is Tuesday, January 21, 2014 If you plan a presentation, please supply the following information as soon as possible: Presentation Title: Presenter Name: E-mail address: Company: Telephone: Estimated Time: Send to Michael Mirmak > All submissions will be reviewed by the IBIS Board and are subject to appro= val before Presentation at the Summit. Note, vendor-specific, confidential or product promotion material is forbid= den at IBIS summits. Presentations MUST be submitted by the deadline for review. The IBIS Open Forum reserves the right to reject submitted presentations or stop a scheduled presentation containing content that has not been reviewed. AGENDA The agenda includes presentations, discussions, breaks, and a FREE lunch. A formal list of speakers and topics will be released one week prior to the event. HOTEL AND TRAVEL INFORMATION The Hotel and Travel Link below provides a conference hotel discount, as well as transportation suggestions: http://www.designcon.com/santaclara/registration/travel-and-venue.php - --=20 This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. - --_000_942B8AE05D9831409A64517FFA4C46015DA35E8AFMSMSX106amrcor_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

 

The IBIS=
 Open Forum is pleased to announce our IBIS Summit meeting at
DesignCon 2014. The Summit wil=
l be held at the Santa Clara Convention
Center in Santa Clara, Califor=
nia, on January 31, 2014.
 
IBIS Summits are designed to e=
nable face-to-face interactions between
model users, model makers and =
tool developers in the IBIS community.
Those interested in presenting=
 at or in attending the event may register
using the information below.
 
The IBIS Open Forum is sponsor=
ing the event, but we welcome additional
sponsors to cover some of the =
meeting expenses, including the FREE lunch and
refreshments.
 
We look forward to seeing you =
in Santa Clara!
 
Best Regards,
 
   Michael Mirmak
   Intel Corp.<=
/o:p>
   Chair, IBIS Open =
Forum
 
 
------------------------------=
- -----------------------------------------
 
     =
            &nb=
sp;  I B I S   S U M M I T   M E E T I N G
 
      =
;            &n=
bsp;            =
; FIRST CALL FOR
 
     =
             &n=
bsp;       PARTICIPATION & PRESENTAT=
IONS
 
------------------------------=
- -----------------------------------------
 
Time/Date:   &n=
bsp;  Friday, January 31, 2014 8:00 AM to 5:00 PM

 


Location:   &nb=
sp;   Santa Clara Convention Center


     =
           5101 Great Ame=
rica Parkway,


     =
           Santa Clara, C=
alifornia, USA


 


Room:    &=
nbsp;      Mission City Ballroom M1 (look for sign=
s)


     =
           Santa Clara Co=
nvention Center


 


Content:   &nbs=
p;    Presentations and Discussions


 


Cost:    &=
nbsp;      FREE


 


Sponsors:   &nb=
sp;   IBIS Open Forum, DesignCon


 


     =
       We are seeking more co-sponsors. The b=
enefits to sponsors include


     =
       recognition at the meeting and acknowl=
edgement in the Calls


     =
       for Papers and meeting minutes.


 


     =
       Your financial support strengthens the=
 organization by


     =
       allowing IBIS to focus resources on in=
dustry activities


     =
       rather than raising money. You will re=
ceive generous


     =
       thanks and public acknowledgement for =
your support.


 


     =
       Please contact Lance Wang <lwang@iometh.com> for co-sponsorship


     =
       information.


 


     =
       DesignCon 2014 Conference:<=
/span>


     =
       January 28 - 31, 2014


 


     =
       Santa Clara Convention Center


     =
       Santa Clara, CA


     =
       http://www.designcon.com/


 


     =
       Conference Schedule:=



     =
       http://www.designcon.com/santaclara/conference


 


 


IBIS participants receive a 20=
% discount on registration, but only through December 31!=



Please contact Lance Wang <=
lwang@iometh.com>  to obtai=
n discounted registration information.


 


 


BACKGROUND

 


DesignCon is the premier annua=
l Silicon Valley event for the electronic


design automation (EDA) and se=
miconductor industry. Topics of current


interest to the IBIS Open Foru=
m are addressed at DesignCon.


 


This meeting will be conducted=
 as a formal IBIS meeting.


 


Presentations are expected to =
be available in an electronic


format, and minutes of the mee=
ting will be issued. Any pending formal


decisions (votes) will be anno=
unced at least two weeks prior to the


meeting.

 


 


CALL FOR PARTICIPANTS


 


People involved in IBIS or rel=
ated model development, EDA tool development,


and digital circuit design are=
 invited to participate in the Summit meeting.


If you plan to participate, pl=
ease register with the information below:


 


   Name:<=
/span>


 


   E-mail address:


 


   Company:


 


   Telephone:


 


Send your registration informa=
tion to Lance Wang <lwang@iometh.com>.  


 


Registration deadline is Frida=
y, January 24, 2014 to receive the free lunch.


 


 


CALL FOR PRESENTATIONS


 


We are seeking presentations f=
rom individuals who have experiences of


interest to the IBIS modeling =
community. These can include, but are not


limited to:<=
/pre>

 


   Demonstrations of=
 modeling techniques


 


   Explanations of b=
ehavioral algorithms


 


   Descriptions of d=
ifficulties encountered


 


   Model correlation=



 


   Modeling building=
 experiences


 


   Comparisons to ot=
her modeling methods


 


   New technologies =
for modeling buffers and components


 


   New technologies =
for modeling packaging and interconnects


 


   Algorithmic model=
ing topics


 


Presentations may be addressed=
 to any and all levels of IBIS experience,


from beginner to expert.<=
/o:p>


 


Presentation Format:


 


   Microsoft PowerPo=
int* or Adobe Acrobat* electronic formats are favored

   and will be pre-l=
oaded on a Microsoft Windows*-based meeting laptop


   prior to the meet=
ing. Materials will be projected but handouts or


   other physical me=
dia are welcome.


 


Time: Usually 15-45 minutes (a=
llow time for questions)


 


Electronic Archival:


 


   Presentations wil=
l be archived under the IBIS Summit website.


   Final submission =
deadline is Tuesday, January 21, 2014


 


If you plan a presentation, pl=
ease supply the following information as


soon as possible:


 


   Presentation Titl=
e:


 


   Presenter Name:


 


   E-mail address:


 


   Company:


 


   Telephone:


 


   Estimated Time:


 


Send to Michael Mirmak <michael.mirmak@intel.com>


 


All submissions will be review=
ed by the IBIS Board and are subject to approval before

Presentation at the Summit.


 


Note, vendor-specific, confide=
ntial or product promotion material is forbidden at


IBIS summits. Presentations MU=
ST be submitted by the deadline for review.


The IBIS Open Forum reserves t=
he right to reject submitted presentations or


stop a scheduled presentation =
containing content that has not been reviewed.


 


 


AGENDA


 


The agenda includes presentati=
ons, discussions, breaks, and a FREE


lunch. A formal list of speake=
rs and topics will be released one


week prior to the event.<=
/o:p>


 


 


HOTEL AND TRAVEL INFORMATION


 


The Hotel and Travel Link belo=
w provides a conference hotel discount, as


well as transportation suggest=
ions:


 


    http=
://www.designcon.com/santaclara/registration/travel-and-venue.php<=
/o:p>


 


 


 


 


 

--=20
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean. - --_000_942B8AE05D9831409A64517FFA4C46015DA35E8AFMSMSX106amrcor_-- - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org |or ibis-request@eda-stds.org | |IBIS reflector archives exist under: | | http://www.eda-stds.org/ibis/email_archive/ Recent | http://www.eda-stds.org/ibis/users_archive/ Recent | http://www.eda-stds.org/ibis/email/ E-mail since 1993 ------------------------------ Date: Fri, 20 Dec 2013 05:45:36 +0000 From: "Mirmak, Michael" Subject: [IBIS-Users] RE: Regarding IBIS Model - --_000_942B8AE05D9831409A64517FFA4C46015DA3E347FMSMSX106amrcor_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable After checking using the parser, of course. J Michael Mirmak Intel Corp. Chair, IBIS Open Forum From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf = Of Muranyi, Arpad Sent: Thursday, December 19, 2013 12:34 PM To: ibis-users@eda.org Subject: [IBIS-Users] RE: Regarding IBIS Model Sandeep, As far as I know, the only way you can check whether an IBIS model is working or not is by putting a test circuit together in your favorite EDA tool and run a few test simulations. Thanks, Arpad =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D From: owner-ibis-users@eda.org [mailto:own= er-ibis-users@eda.org] On Behalf Of Sandeep Kumar(Sandeep Kumar)/Engineer I= (??)/MSI.Engineering/(?)?? Sent: Thursday, December 12, 2013 9:37 PM To: ibis-users@eda.org Subject: [IBIS-Users] Regarding IBIS Model Hi , I want to know is there any method to know to check whether IBIS model is w= orking or not except manual Verification. Thanks & Regards Sandeep Kumar - -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. - -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. - --=20 This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. - --_000_942B8AE05D9831409A64517FFA4C46015DA3E347FMSMSX106amrcor_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

After checking using t= he parser, of course.  J

 

Michael Mirmak

Intel Corp.

Chair, IBIS Open Forum

 

 

From: owner-ibis-users@eda.org [mai= lto:owner-ibis-users@eda.org] On Behalf Of Muranyi, Arpad
Sent: Thursday, December 19, 2013 12:34 PM
To: ibis-users@eda.org
Subject: [IBIS-Users] RE: Regarding IBIS Model

 

Sandeep,

 

As far as I know, the only w= ay you can check

whether an IBIS model is wor= king or not is by

putting a test circuit toget= her in your favorite

EDA tool and run a few test = simulations.

 

Thanks,

 

Arpad

=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

 

From: owner-ibis-users@eda.org [<= a href=3D"mailto:owner-ibis-users@eda.org">mailto:owner-ibis-users@eda.org<= /a>] On Behalf Of Sandeep Kumar(Sandeep Kumar)/Engineer I (??)/MSI.Engine= ering/(?)??
Sent: Thursday, December 12, 2013 9:37 PM
To: ibis-users@eda.org
Subject: [IBIS-Users] Regarding IBIS Model

 

Hi ,

 

I want to know is there any method to know to check = whether IBIS model is working or  not except

manual Verification.=

 

Thanks & Regards=

Sandeep Kumar=

 


- --
This message has been scanned for viruses and
dangerous content by MailScanne= r, and is
believed to be clean.


- --
This message has been scanned for viruses and
dangerous content by MailScanne= r, and is
believed to be clean.


--=20
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean. - --_000_942B8AE05D9831409A64517FFA4C46015DA3E347FMSMSX106amrcor_-- - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org |or ibis-request@eda-stds.org | |IBIS reflector archives exist under: | | http://www.eda-stds.org/ibis/email_archive/ Recent | http://www.eda-stds.org/ibis/users_archive/ Recent | http://www.eda-stds.org/ibis/email/ E-mail since 1993 ------------------------------ Date: Tue, 17 Dec 2013 03:08:42 +0000 (UTC) From: Yuancheng Ji Subject: [IBIS-Users] {Spam?} Invitation to connect on LinkedIn - ------=_Part_74615228_925215816.1387249722739 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit LinkedIn - ------------ I'd like to add you to my professional network on LinkedIn. - - Yuancheng Yuancheng Ji Student at National University of Singapore Singapore Confirm that you know Yuancheng Ji: https://www.linkedin.com/e/f7dixi-hpako0nr-1w/isd/18728727625/Lu6-HaMl/?hs=false&tok=2x8_YF9fiYOS01 - -- You are receiving Invitation to Connect emails. Click to unsubscribe: http://www.linkedin.com/e/f7dixi-hpako0nr-1w/uaNqv0zWAiN94IVjOVBs4MzZKS4WQj/goo/ibis-users%40eda%2Eorg/20061/I6105264038_1/?hs=false&tok=3ip35hBPyYOS01 (c) 2012 LinkedIn Corporation. 2029 Stierlin Ct, Mountain View, CA 94043, USA. - -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. - ------=_Part_74615228_925215816.1387249722739 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: 7bit
 
LinkedIn
 
 
 
 
From Yuancheng Ji
 
Student at National University of Singapore
Singapore
 
 
 
 
 
 
 

I'd like to add you to my professional network on LinkedIn.

- - Yuancheng

 
 
 
 
 
 
 
You are receiving Invitation to Connect emails. Unsubscribe
© 2013, LinkedIn Corporation. 2029 Stierlin Ct. Mountain View, CA 94043, USA
 

--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean. - ------=_Part_74615228_925215816.1387249722739-- - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org |or ibis-request@eda-stds.org | |IBIS reflector archives exist under: | | http://www.eda-stds.org/ibis/email_archive/ Recent | http://www.eda-stds.org/ibis/users_archive/ Recent | http://www.eda-stds.org/ibis/email/ E-mail since 1993 ------------------------------ Date: Sat, 21 Dec 2013 01:16:02 +0000 From: "Mirmak, Michael" Subject: [IBIS-Users] IBIS Summit at DesignCon 2014 - Second Call for Participation and Presentations - --_000_942B8AE05D9831409A64517FFA4C46015DA3ECE6FMSMSX106amrcor_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable The IBIS Open Forum is pleased to announce our IBIS Summit meeting at DesignCon 2014. The Summit will be held at the Santa Clara Convention Center in Santa Clara, California, on January 31, 2014. IBIS Summits are designed to enable face-to-face interactions between model users, model makers and tool developers in the IBIS community. Those interested in presenting at or in attending the event may register using the information below. The IBIS Open Forum is sponsoring the event, but we welcome additional sponsors to cover some of the meeting expenses, including the FREE lunch and refreshments. We look forward to seeing you in Santa Clara! Best Regards, Michael Mirmak Intel Corp. Chair, IBIS Open Forum - ----------------------------------------------------------------------- I B I S S U M M I T M E E T I N G CALL FOR PARTICIPATION & PRESENTATIONS - ----------------------------------------------------------------------- Time/Date: Friday, January 31, 2014 8:00 AM to 5:00 PM Location: Santa Clara Convention Center 5101 Great America Parkway, Santa Clara, California, USA Room: Mission City Ballroom M1 (look for signs) Santa Clara Convention Center Content: Presentations and Discussions Cost: FREE Sponsors: IBIS Open Forum, DesignCon We are seeking more co-sponsors. The benefits to sponsors inclu= de recognition at the meeting and acknowledgement in the Calls for Papers and meeting minutes. Your financial support strengthens the organization by allowing IBIS to focus resources on industry activities rather than raising money. You will receive generous thanks and public acknowledgement for your support. Please contact Lance Wang > for co-sponsorship information. DesignCon 2014 Conference: January 28 - 31, 2014 Santa Clara Convention Center Santa Clara, CA http://www.designcon.com/ Conference Schedule: http://www.designcon.com/santaclara/conference IBIS participants receive a 20% discount on registration, but only through = December 31! Please contact Lance Wang > to o= btain discounted registration information. BACKGROUND DesignCon is the premier annual Silicon Valley event for the electronic design automation (EDA) and semiconductor industry. Topics of current interest to the IBIS Open Forum are addressed at DesignCon. This meeting will be conducted as a formal IBIS meeting. Presentations are expected to be available in an electronic format, and minutes of the meeting will be issued. Any pending formal decisions (votes) will be announced at least two weeks prior to the meeting. CALL FOR PARTICIPANTS People involved in IBIS or related model development, EDA tool development, and digital circuit design are invited to participate in the Summit meeting. If you plan to participate, please register with the information below: Name: E-mail address: Company: Telephone: Send your registration information to Lance Wang . Registration deadline is Friday, January 24, 2014 to receive the free lunch. CALL FOR PRESENTATIONS We are seeking presentations from individuals who have experiences of interest to the IBIS modeling community. These can include, but are not limited to: Demonstrations of modeling techniques Explanations of behavioral algorithms Descriptions of difficulties encountered Model correlation Modeling building experiences Comparisons to other modeling methods New technologies for modeling buffers and components New technologies for modeling packaging and interconnects Algorithmic modeling topics Presentations may be addressed to any and all levels of IBIS experience, from beginner to expert. Presentation Format: Microsoft PowerPoint* or Adobe Acrobat* electronic formats are favored and will be pre-loaded on a Microsoft Windows*-based meeting laptop prior to the meeting. Materials will be projected but handouts or other physical media are welcome. Time: Usually 15-45 minutes (allow time for questions) Electronic Archival: Presentations will be archived under the IBIS Summit website. Final submission deadline is Tuesday, January 21, 2014 If you plan a presentation, please supply the following information as soon as possible: Presentation Title: Presenter Name: E-mail address: Company: Telephone: Estimated Time: Send to Michael Mirmak > All submissions will be reviewed by the IBIS Board and are subject to appro= val before Presentation at the Summit. Note, vendor-specific, confidential or product promotion material is forbid= den at IBIS summits. Presentations MUST be submitted by the deadline for review. The IBIS Open Forum reserves the right to reject submitted presentations or stop a scheduled presentation containing content that has not been reviewed. AGENDA The agenda includes presentations, discussions, breaks, and a FREE lunch. A formal list of speakers and topics will be released one week prior to the event. HOTEL AND TRAVEL INFORMATION The Hotel and Travel Link below provides a conference hotel discount, as well as transportation suggestions: http://www.designcon.com/santaclara/registration/travel-and-venue.php - --=20 This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. - --_000_942B8AE05D9831409A64517FFA4C46015DA3ECE6FMSMSX106amrcor_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

 

The IBIS=
 Open Forum is pleased to announce our IBIS Summit meeting at
DesignCon 2014. The Summit wil=
l be held at the Santa Clara Convention
Center in Santa Clara, Califor=
nia, on January 31, 2014.
 
IBIS Summits are designed to e=
nable face-to-face interactions between
model users, model makers and =
tool developers in the IBIS community.
Those interested in presenting=
 at or in attending the event may register
using the information below.
 
The IBIS Open Forum is sponsor=
ing the event, but we welcome additional
sponsors to cover some of the =
meeting expenses, including the FREE lunch and
refreshments.
 
We look forward to seeing you =
in Santa Clara!
 
Best Regards,
 
   Michael Mirmak
   Intel Corp.<=
/o:p>
   Chair, IBIS Open =
Forum
 
 
------------------------------=
- -----------------------------------------
 
     =
            I B I S&=
nbsp;  S U M M I T   M E E T I N G    &n=
bsp;       
 
      =
;            &n=
bsp;            =
;CALL FOR
 
     =
             &n=
bsp;  PARTICIPATION & PRESENTATIONS
 
------------------------------=
- -----------------------------------------
 
Time/Date:   &n=
bsp;  Friday, January 31, 2014 8:00 AM to 5:00 PM

 


Location:   &nb=
sp;   Santa Clara Convention Center


     =
           5101 Great Ame=
rica Parkway,


     =
           Santa Clara, C=
alifornia, USA


 


Room:    &=
nbsp;      Mission City Ballroom M1 (look for sign=
s)


     =
           Santa Clara Co=
nvention Center


 


Content:   &nbs=
p;    Presentations and Discussions


 


Cost:    &=
nbsp;      FREE


 


Sponsors:   &nb=
sp;   IBIS Open Forum, DesignCon


 


     =
       We are seeking more co-sponsors. The b=
enefits to sponsors include


     =
       recognition at the meeting and acknowl=
edgement in the Calls


     =
       for Papers and meeting minutes.


 


     =
       Your financial support strengthens the=
 organization by


     =
       allowing IBIS to focus resources on in=
dustry activities


     =
       rather than raising money. You will re=
ceive generous


     =
       thanks and public acknowledgement for =
your support.


 


     =
       Please contact Lance Wang <lwang@iometh.com> for co-sponsorship


     =
       information.


 


     =
       DesignCon 2014 Conference:<=
/span>


     =
       January 28 - 31, 2014


 


     =
       Santa Clara Convention Center


     =
       Santa Clara, CA


     =
       http://www.designcon.com/


 


     =
       Conference Schedule:=



     =
       http://www.designcon.com/santaclara/conference


 


 


IBIS participants receive a 20=
% discount on registration, but only through December 31!=



Please contact Lance Wang <=
lwang@iometh.com>  to obtai=
n discounted registration information.


 


 


BACKGROUND

 


DesignCon is the premier annua=
l Silicon Valley event for the electronic


design automation (EDA) and se=
miconductor industry. Topics of current


interest to the IBIS Open Foru=
m are addressed at DesignCon.


 


This meeting will be conducted=
 as a formal IBIS meeting.


 


Presentations are expected to =
be available in an electronic


format, and minutes of the mee=
ting will be issued. Any pending formal


decisions (votes) will be anno=
unced at least two weeks prior to the


meeting.

 


 


CALL FOR PARTICIPANTS


 


People involved in IBIS or rel=
ated model development, EDA tool development,


and digital circuit design are=
 invited to participate in the Summit meeting.


If you plan to participate, pl=
ease register with the information below:


 


   Name:<=
/span>


 


   E-mail address:


 


   Company:


 


   Telephone:


 


Send your registration informa=
tion to Lance Wang <lwang@iometh.com>.  


 


Registration deadline is Frida=
y, January 24, 2014 to receive the free lunch.


 


 


CALL FOR PRESENTATIONS


 


We are seeking presentations f=
rom individuals who have experiences of


interest to the IBIS modeling =
community. These can include, but are not


limited to:<=
/pre>

 


   Demonstrations of=
 modeling techniques


 


   Explanations of b=
ehavioral algorithms


 


   Descriptions of d=
ifficulties encountered


 


   Model correlation=



 


   Modeling building=
 experiences


 


   Comparisons to ot=
her modeling methods


 


   New technologies =
for modeling buffers and components


 


   New technologies =
for modeling packaging and interconnects


 


   Algorithmic model=
ing topics


 


Presentations may be addressed=
 to any and all levels of IBIS experience,


from beginner to expert.<=
/o:p>


 


Presentation Format:


 


   Microsoft PowerPo=
int* or Adobe Acrobat* electronic formats are favored

   and will be pre-l=
oaded on a Microsoft Windows*-based meeting laptop


   prior to the meet=
ing. Materials will be projected but handouts or


   other physical me=
dia are welcome.


 


Time: Usually 15-45 minutes (a=
llow time for questions)


 


Electronic Archival:


 


   Presentations wil=
l be archived under the IBIS Summit website.


   Final submission =
deadline is Tuesday, January 21, 2014


 


If you plan a presentation, pl=
ease supply the following information as


soon as possible:


 


   Presentation Titl=
e:


 


   Presenter Name:


 


   E-mail address:


 


   Company:


 


   Telephone:


 


   Estimated Time:


 


Send to Michael Mirmak <michael.mirmak@intel.com>


 


All submissions will be review=
ed by the IBIS Board and are subject to approval before

Presentation at the Summit.


 


Note, vendor-specific, confide=
ntial or product promotion material is forbidden at


IBIS summits. Presentations MU=
ST be submitted by the deadline for review.


The IBIS Open Forum reserves t=
he right to reject submitted presentations or


stop a scheduled presentation =
containing content that has not been reviewed.


 


 


AGENDA


 


The agenda includes presentati=
ons, discussions, breaks, and a FREE


lunch. A formal list of speake=
rs and topics will be released one


week prior to the event.<=
/o:p>


 


 


HOTEL AND TRAVEL INFORMATION


 


The Hotel and Travel Link belo=
w provides a conference hotel discount, as


well as transportation suggest=
ions:


 


    http=
://www.designcon.com/santaclara/registration/travel-and-venue.php<=
/o:p>


 


 


 


 


 

--=20
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean. - --_000_942B8AE05D9831409A64517FFA4C46015DA3ECE6FMSMSX106amrcor_-- - -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org |or ibis-request@eda-stds.org | |IBIS reflector archives exist under: | | http://www.eda-stds.org/ibis/email_archive/ Recent | http://www.eda-stds.org/ibis/users_archive/ Recent | http://www.eda-stds.org/ibis/email/ E-mail since 1993 ------------------------------ End of ibis-users V1 #230 *************************