From owner-ibis-users@eda.org Fri Nov 23 00:32:37 2001 Received: by server.eda.org (8.12.0.Beta7/8.12.0.Beta7) id fAN8Vp1A020718; Fri, 23 Nov 2001 00:31:51 -0800 (PST) Message-Id: <4.3.2.7.2.20011123002655.00b06df0@mira-sjcd-3.cisco.com> X-Sender: arafiq@mira-sjcd-3.cisco.com X-Mailer: QUALCOMM Windows Eudora Version 4.3.2 Date: Fri, 23 Nov 2001 00:35:44 -0800 To: Ramesh Karmungi From: Abdulrahman A Rafiq Subject: Re: Execution of s2ibis2 Cc: ibis-users@eda.org In-Reply-To: <3BFDF524.DF37864D@spikeindia.com> Mime-Version: 1.0 Content-Type: multipart/alternative; boundary="=====================_141694926==_.ALT" Sender: owner-ibis-users@eda.org Precedence: bulk --=====================_141694926==_.ALT Content-Type: text/plain; charset="us-ascii"; format=flowed Ramesh, Is there an output file generated ? Can you open it in your basic text editor and see what error message its flaging ? Also see if you can open the .spi file and see if there are any messages in there ? Abbey A. Rafiq At 12:35 PM 11/23/2001 +0530, Ramesh Karmungi wrote: >Hello, > >I am new user of IBIS tools. I have downloaded Spitran to develop ibis >models. Spitran gives me .s2i file. This was used as input file to run >s2ibis2.exe. However, am unable to run s2ibis2. Following lines will >appear on screen and stops execution of s2ibis2.. > >s2ibis2: Analyzing component MCM Driver . >s2ibis2: Starting HSpice job with input putout.spi. >failure!!!!! > >I have noticed it creates a .spi file in the process. > >I work on PC with windows 2000 or windows NT system. I have Avanti HSPICE >99.4. >Could anyone help me out to sort out the problem. > >Thanks and Regards with anticipation > >Ramesh K --=====================_141694926==_.ALT Content-Type: text/html; charset="us-ascii" Ramesh,

Is there an output file generated ? Can you open it in your basic text editor and see what error message its flaging ?
Also see if you can open the .spi file and see if there are any messages in there ?

Abbey A. Rafiq




At 12:35 PM 11/23/2001 +0530, Ramesh Karmungi wrote:
Hello,

I am new user of  IBIS tools. I have downloaded Spitran to develop ibis models. Spitran gives me .s2i file. This was used as input file to run s2ibis2.exe.  However, am unable to run s2ibis2. Following lines will appear on screen and stops execution of s2ibis2..

s2ibis2: Analyzing component MCM Driver .
s2ibis2: Starting HSpice job with input putout.spi.
failure!!!!!

I have noticed it creates a .spi file in the process.

I work on PC with windows 2000 or windows NT system. I have Avanti HSPICE 99.4.  
Could anyone help me out to sort out the problem.

Thanks and Regards with anticipation

Ramesh K
--=====================_141694926==_.ALT--