#!/bin/sh
#
# Test results last captured at "Wed Mar  9 19:49:17 PST 2005"
#
# This is an IBIS icm test program
#
# It is a self-contained package of all of the 
# files and data required to run an icm parser test.
#
# Usage:  ./test_004  <arg>
#
# <nothing>               = Run the test silently in GNU check mode
# "Brief"                 = Run the test.
#                           If there is no error, produce a one line summary
#                           Otherwise, produce a full test report.
# "Full"                  = Run the test and always produce a full test report
# "Capture"               = Capture test results and REWRITE the test program
# "Extract"               = Extract the .icm and .out files
#

Test=`basename $0`
Synopsis="Illegal Characters cause errors"
ExitStatus="1"
Counters="ERRORS: 12 WARNINGS: 0"
ExtraFiles="test_model_1.jpg"

Description=`grep -v '^EOF$' <<'EOF'
This file contains 12 'illegal' characters outside the permitted ascii
range of 0x20-0x7e.

This must result in 12 errors.
EOF`

Output=`grep -v '^EOF$' <<'EOF'
IBIS ICM Parser, version 1.1.0
ERROR (Line 7/Col 1) Invalid character: <'01'> ignored.
ERROR (Line 8/Col 1) Invalid character: <'02'> ignored.
ERROR (Line 9/Col 1) Invalid character: <'03'> ignored.
ERROR (Line 11/Col 1) Invalid character: <'1d'> ignored.
ERROR (Line 12/Col 1) Invalid character: <'1e'> ignored.
ERROR (Line 13/Col 1) Invalid character: <'1f'> ignored.
ERROR (Line 18/Col 1) Invalid character: <'c2'> ignored.
ERROR (Line 18/Col 2) Invalid character: <'81'> ignored.
ERROR (Line 19/Col 1) Invalid character: <'c2'> ignored.
ERROR (Line 19/Col 2) Invalid character: <'82'> ignored.
ERROR (Line 20/Col 1) Invalid character: <'c2'> ignored.
ERROR (Line 20/Col 2) Invalid character: <'83'> ignored.
Finished. ERRORS: 12 WARNINGS: 0
EOF`

ICM=`grep -v '^EOF$' <<'EOF'

What follows is a bunch of illegal characters.  They are illegal anytime
even before the [Begin Header]

Some characters below <space>.  There are 6 errors here.









Some characters above <rubout>.  Darned if I can even generate a <rubout>.
These are actually wide characters, both illegal.  So 6 more errors.





|**********************************************************************
[Begin Header]
[ICM Ver]             1.1
[File Name]           test_004.icm
[File Rev]            0.1
[Date]                October 8, 2003
[Source]              Kelly C. Green

[Notes]               Test Illegal character handling

[Disclaimer]          No license, express or implied, by estoppel or 
                      otherwise, to any intellectual property rights is 
                      granted by this document. 

                      No warranty of any kind.  No support of any kind.
                      Use this file entirely at your own risk.

[Copyright]           None - public domain
[Support]             http://www.vhdl.org/pub/ibis/
[Redistribution]      Yes    
[Redistribution Text] You may do anything you wish to this file.
[End Header]

|**********************************************************************
|
[Comment Char] |_char
|
|**********************************************************************

[Begin ICM Family]        Template test file
[Manufacturer]            None
[ICM Family Description]  This file is a template from which most 
                          subsequent test files will be derived.

|**********************************************************************
[ICM Model List] 
|  Name             Mating   Min_Slew_Time   Image
|
   TestModel1       Mated    100ps           test_model_1.jpg
|
|          SectA
| Port1 >---------< Port2
|
|**********************************************************************
[Begin ICM Model] TestModel1
ICM_model_type SLM_general
SGR 1:1
|
[Tree Path Description]
  Model_pinmap Port1
  Section Mult=1 SectA
  Model_pinmap Port2
|
[End ICM Model]
|
|**********************************************************************
[ICM Pin Map] Port1
Pin_order Row_ordered
Num_of_rows = 1
Num_of_columns = 2
Pin_list
|Pin Name
A1 SIG1_IN
A2 SIG2_IN

[ICM Pin Map] Port2
Pin_order Row_ordered
Num_of_rows = 1
Num_of_columns = 2
Pin_list
|Pin Name
B1 SIG1_OUT
B2 SIG2_OUT

[End ICM Family]
|
|**********************************************************************
[Begin ICM Section] SectA
[Derivation Method] Lumped
[Resistance Matrix] Diagonal_matrix
1.0mohm
1.0e-3
[Inductance Matrix] Diagonal_matrix
4.0nh
4.0e-9
[Capacitance Matrix] Diagonal_matrix
2.0pf
2.0e-12
[End ICM Section]

|**********************************************************************
[End]
|**********************************************************************
EOF`

#
# we are either running the test directly in the test directory
# or are running make check.  make sets the srcdir variable
# so we can tell the difference easily
#

if [ -z "${srcdir}" ]
then
    srcdir="."
    exedir="../../src"
else
    srcdir="${srcdir}/v_1_1"
    exedir="../src"
fi

export srcdir exedir Test Synopsis ExitStatus Counters ExtraFiles Description Output ICM

exec ${srcdir}/run_test "$@"
